Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Mining Trucks

797F Mining Truck

  • Engine Model
    Cat C175-20
  • Engine Model
    Cat® C175-20
  • Gross Power
    4000.0 hp
  • Gross Power
    4000 HP
Engine
Engine Model
Cat C175-20
Engine Model
Cat® C175-20
Gross Power
4000.0 hp
Gross Power
4000 HP
Bore
6.9 in
Bore
6.9 in
Stroke
8.7 in
Stroke
8.7 in
Displacement
6469.0 in3
Displacement
6469 in³
Net Power
3793.0 hp
Net Power
3793.0 hp
Note
Power ratings apply at 1,750 rpm when tested under the specific conditions for the specified standard.
Note
Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 99 kPa (29.32 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (69° F) and an LHV of 42 780 kJ/kg (18,390 Btu/lb) when engine is used at 30° C (38° F).
Emissions
U.S. EPA Compliant. Where applicable, the Cat C175-20 engine is compliant with U.S. EPA emission standards.
Note
No low altitude arrangement (LAA) engine derating required up to 2134 m (7,000 ft) altitude.
Note
No high altitude arrangement (HAA) engine derating required up to 4877 m (16,000 ft) altitude.
Weights - Approximate
Gross Machine Operating Weight
1375000.0 lb
Body Weight Range
41 368-61 235 kg (91,200-135,000 lb)
Chassis Weight Range
210 630-219 146 kg (464,359-483,134 lb)
Target Gross Machine Operating Weight
1375000 lb
Note
Refer to the Cat Mining Truck 10/10/20 Payload Policy for maximum gross machine weight limitations.
Note
Body weight varies depending on body and liner configuration. Weight range for known applications.
Note
Chassis weight with 100 percent fuel, hoist, body mounting group, rims and tires.
Operating Specifications
Nominal Payload Capacity
400.0 tons
Nominal Payload Capacity
400 ton (US)
Top Speed
42.0 mph
Steer Angle
40.0 Degrees
Steer Angle
40 °
Turning Circle Clearance Diameter
138.0 ft
Heaped SAE
240-267 m3 (314-350 yd3)
Machine Clearance Turning Diameter
138 ft
Top Speed
42 mile/h
Final Drives
Differential Ratio
1.276:1
Differential Ratio
1.276:1
Planetary Ratio
16.67:1
Planetary Ratio
16.67:1
Total Reduction Ratio
21.26:1
Total Reduction Ratio
21.26:1
Note
Double reduction, planetary with full floating axles.
Transmission
Forward 1
7.0 mph
Forward
7 mile/h
Forward 2
9.5 mph
Forward
9.5 mile/h
Forward 3
12.7 mph
Forward
12.7 mile/h
Forward 4
17.2 mph
Forward
17.2 mile/h
Forward 5
23.1 mph
Forward
23.1 mile/h
Forward 6
31.1 mph
Forward
31.2 mile/h
Forward 7
42.0 mph
Forward
42 mile/h
Reverse
7.4 mph
Reverse
7.4 mile/h
Suspension
Effective Cylinder Stroke
12.3 in
Effective Cylinder Stroke
6.5 in
Rear Axle Oscillation
±4.0 degrees
Rear axle
±4.0 degrees
Effective Cylinder Stroke
12.3 in
Effective Cylinder Stroke
6.5 in
Body Hoists
Pump Flow
317.0 gal/min
Relief Valve Setting
3510.0 psi
Body Raise Time
25.0 Seconds
High Idle Body Lower Time
19 s
Body Raise Time
25 s
Pump Flow
317 gal/min
Relief Valve Setting
3510 psi
Brakes
Number of Discs Per Side
10.0
Number of Discs Per Side
15.0
Outside Diameter
42 in
Standards
J-ISO 3450 JAN88, ISO 3450-1996
Standards
ISO 3450:2011
Brake Surface
51243 in²
Number of Discs per Side
10
Number of Discs per Side
15
Approximate Weights - MSD II
Front Axle
47.2 %
Front Axle
33.3 %
Rear Axle
52.8 %
Rear Axle
66.7 %
Front Axle
47.2%
Front Axle
33.3%
Rear Axle
52.8%
Rear Axle
66.7%
Weight Distributions - Approximate
Front Axle
33.3 %
Rear Axle
66.7 %
Front Axle
47.2%
Front Axle
33.3%
Rear Axle
52.8%
Rear Axle
66.7%
Front Axle
47.2 %
Rear Axle
52.8 %
Capacity - MSD II - 100% Fill Factor
Heaped
240-267 m3 (314-350 yd3)
Struck
188-213 m3 (246-290 yd3)
Heaped
240-267 m3 (314-350 yd3)
Struck
188-213 m3 (246-290 yd3)
Note
Consult your local Cat dealer for truck body recommendations.
Service Refill Capacities
Fuel Tank
1000.0 gal
Cooling System
306.0 gal
Cooling System
306 gal (US)
Crankcase
84.0 gal
Crankcase
84 gal (US)
Steering Tank
67.0 gal
Steering Tank
67 gal (US)
Steering System
94.0 gal
Steering System
94 gal (US)
Brake
441.0 gal
Differentials
311.0 gal
Final Drives
49.0 gal
Brake
219 gal (US)
Brake
203 gal (US)
Front Wheels
16 gal (US)
Torque Converter Sump
80 gal (US)
Brake Hoist System
441 gal (US)
Differentials
311 gal (US)
Final Drive
49 gal (US)
Fuel Tank
1000 gal (US)
Torque Converter
166 gal (US)
Tires
Tire
59/80R63 - Michelin or Bridgestone
Tires
59/80R63 – Michelin or Bridgestone
Note
Productive capabilities of the 797F are such that, under certain job conditions, TKPH (TMPH) capabilities of standard tires could be exceeded and, therefore, limit production.
Dimensions
Front Canopy Height
25.33 ft
Loaded Ground Clearance
2.58 ft
Height
21.4 ft
Engine Guard Clearance
3.33 ft
Inside Body Depth
11 ft
Loading Height
23 ft
Overall Height
51.5 ft
Rear Axle
3.08 ft
Overall Body Length
48.6 ft
Overall Body Length
48.6 ft
Inside Body Length
32.75 ft
Inside Body Length
32.75 ft
Overall Length
49.5 ft
Overall Length
49.5 ft
Wheelbase
23.58 ft
Wheel Base
23.58 ft
Rear Axle to Tail
12.9 ft
Rear Axle
12.9 ft
Dump Clearance
6.58 ft
Dump Clearance
6.58 ft
Loading Height
23.0 ft
Inside Body Depth
11.0 ft
Overall Height
51.5 ft
Centerline Front Tire Width
21.41 ft
Centerline Front Tire Width
21.41 ft
Engine Guard Clearance
3.33 ft
Overall Canopy Width
29.91 ft
Overall Canopy Width
29.91 ft
Outside Body Width
32.0 ft
Outside Body Width
32 ft
Inside Body Width
27.91 ft
Inside Body Width
27.91 ft
Rear Axle Clearance
3.08 ft
Centerline Rear Dual Tire Width
20.41 ft
Centerline of Rear Dual Tire Width
20.41 ft
Overall Tire Width
31.25 ft
Overall Tire Width
31.25 ft
ROPS
ROPS Standards
ISO 3471-1994
ROPS Standards
ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.
FOPS Standards
FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II FOPS criteria.
Sound
Sound Standards
SAE J919:1995, ANSI/SAE J166:2008, ISO 6394:2008, ISO 6396:2008, ISO 6393:2008, ISO 6395:2008, SAW J88:2006
Sound Standards
The operator sound pressure level measured according to work cycle procedures specified in ISO 6394:2008 and 6396:2008 is 76 dB(A) for cab offered by Caterpillar when properly installed and maintained and tested with doors and windows closed.
Sound Standards
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Steering
Steering Standards
SAE J1511 OCT90, ISO 5010:1992
Steering Standards
ISO 5010:2007
  • ELECTRICAL
    • Alarm, back-up
    • Brushless, alternator, 150 ampere
    • Batteries, 12V (2) 93 amp-hour
    • Converter, 12V electrical
    • Electrical system, 24V, 10, 20 and 25 amp
    • Battery charge receptacle
    • Lighting system:
      – Back-up and hazard lights
      – Directional signals (front, rear LED)
      – Front stair access/Service deck
      – Stop/tail lights (LED)
      – Engine compartment
      – VIMS, blue light (LED)
      – Headlights with lo-hi beam selector
  • OPERATOR ENVIRONMENT
    • Standard cab:
      – Standard optimized operator seats
      – Suspension trainer seat
      – Flip down front visor
      – Standard side of cab access
    • Deluxe cab:
      – Heated and ventilated seats
      – Suspension trainer seat
      – Retractable front visor
      – Rear of cab access and standard side of cab access
      – Power windows
    • Deluxe cold weather cab:
      – Heated and ventilated seats
      – Suspension trainer seat
      – Retractable front visor
      – Rear of cab access and standard side of cab access
      – Power windows
      – Heated mirrors
    • All cab options include the following features:
      • Air conditioner with automatic climate control
      • 12V DC power supply (3)
      • Coat hook
      • Diagnostic connection port
      • Dome courtesy light
      • Entertainment radio ready 5 amp converter, speakers and wiring harness
      • Gauges/Indicators:
        – Gauge panel: Transmission fluid temperature; Brake oil temperature; Engine coolant temperature; Fuel level; Torque converter oil temperature
        – Electric engine control fault indicator
        – Electric hour meter
        – Speedometer
        – Tachometer
        – Transmission gear indicator
        – VIMS message center with advisor
      • Heater/defroster (11 070 kCal/43,930 Btu)
      • Horn
      • Cat Detect System
      • Storage compartments
      • Hoist, body control (electric)
      • ROPS cab, insulated/sound suppressed
      • Seat, operator, air suspension
      • Seatbelt, operator, three-points, retractable
      • Seat, trainer, air suspension
      • Seatbelt, trainer, two-points, retractable
      • Stairway and walkway access, 600 mm (23.6 in)
      • Steering wheel, multi tilt, padded, telescopic
      • Tinted glass
      • Window, operator, electric powered
      • Windshield wiper, intermittent control and washer
      • Cup holder
      • Mirrors, right and left
  • POWER TRAIN
    • C175-20 emits equivalent to Tier 2 emission standards:
      – Turbocharging (4)/Air-to-Air Aftercooler (ATAAC)
      – Air cleaner with precleaner (4)
      – Ground level engine shutdown
      – Ether starting aid (automatic)
      – Elevated low idle control
      – Crankcase protection
      – Multi-point oil pressure sensing
      – Automatic starter protection
    • Braking system:
      – Park brake integrated with gear selector
      – Brake release motor (towing)
      – Oil-cooled, multi-disc (front and rear) – service, retarding, parking, secondary
      – Automatic Retarder Control, adjustable
      – Engine overspeed protection
      – Extended life brake disc material
    • Transmission:
      – 7-speed, automatic powershift with electronic controls (ECPC)
      – Body-up shift inhibitor
      – Controlled throttle shifting
      – Directional shift management
      – Neutral coast inhibitor
      – Neutral start switch
      – Downshift/Reverse shift inhibitor
      – Individual clutch modulation
      – Body-up reverse neutralizer
      – Programmable top speed
      – Lock-up torque converter
    • Pre-lubrication/engine
    • Rear axle continuous lubrication/filtration
  • OTHER STANDARD EQUIPMENT
    • Traction Control System
    • Auto lubrication system
    • Aux “buddy” dumping quick connect
    • Aux steering quick connect (towing)
    • Driveline guard
    • Fast fill fuel system
    • Fuel filter with water separator
    • Ground level VIMS data port
    • Ground level battery lockout
    • Ground level transmission lockout
    • Ground level engine start lockout
    • Ground level engine shut-down
    • High-speed crankcase oil change
    • Reservoirs (3 separate):
      – Brake/Hoist, Steering/Fan, Transmission/Converter
    • Rock ejectors
    • Supplemental steering (automatic)
    • Tie-down eyes
    • Center hitch and tow points (front), tow pin (rear)
    • Vandalism protection locks
    • Vital Information Management System (VIMS):
      – Includes VIMS Payload Monitor with max payload and speed manager
    • Hydraulic filters, 1,000 hour
    • S·O·S sample ports
    • Service points, ground level
    • Sight level gauges for hydraulic/engine oil
  • ANTIFREEZE
    • Extended Life Coolant to –35° C (–30° F)
  • OPTIONAL EQUIPMENT
    • Cat Detect System
    • Cabin air precleaner
    • Throttle lock
    • Engine delay shutdown timer
    • Antifreeze/coolant protects to –50° C (–58° F)
    • Fuel tank (7570 L/2,000 gal)
    • SL-V grease injectors
    • Body heat
    • Rear axle lubrication cooler
    • External digital payload display
    • Oil renewal system
    • Oil renewal system with 3 day tank
    • Engine coolant and oil heater for cold weather starts
    • Road Analysis Control (RAC)
    • Portable fire extinguisher
    • Torque converter guard
    • Brake wear indicator gauge
    • Rims (wedge)
    • Rim guard