Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Industrial

Cat® C13 Industrial Diesel Engine

  • Minimum Power
    385.0 bhp
  • Maximum Power
    520 HP
  • Maximum Power
    520.0 bhp
  • Maximum Torque
    1634 lb-ft @ 1400 rpm
Power Rating
Minimum Power
385.0 bhp
Maximum Power
520 HP
Maximum Power
520.0 bhp
Maximum Torque
1634 lb-ft @ 1400 rpm
Rated Speed
1800-2100 rpm
Minimum Power
385 HP
Rated Speed
1800-2100 rpm
Emission Standards
Emissions
China Nonroad III, U.S. EPA Tier 3 Equivalent or U.S. EPA Tier 2 Equivalent, EU Stage IIIA Equivalent or EU Stage II Equivalent
Emissions
China Nonroad III, U.S. EPA Tier 3 Equivalent or U.S. EPA Tier 2 Equivalent, EU Stage IIIA Equivalent or EU Stage II Equivalent
General
Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Bore
130 mm (5.12 in)
Bore
130 mm (5.12 in)
Bore
5.1 in
Stroke
6.2 in
Stroke
157 mm (6.18 in)
Stroke
157 mm (6.18 in)
Displacement
762.8 in³
Displacement
12.5 L (762.8 in³)
Aspiration
Turbocharged Aftercooled (TA)
Displacement
12.5 L (762.8 in³)
Compression Ratio
17.3:1
Compression Ratio
17.3:1
Aspiration
Turbocharged Aftercooled (TA)
Combustion System
Direct Injection
Combustion System
Direct Injection
Rotation
Counterclockwise
Rotation from Flywheel End
Counterclockwise
Aftertreatment
-
Engine Dimensions - Approximate
Length
51 in
Width
346.7 in
Height
41.5 in
Weight
2003 lb
Height
1053.8 mm (41.49 in)
Length
1295 mm (50.98 in)
Weight
908.4 kg (2002.7 lb)
Width
1186 mm (346.69 in)
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
Length
1295 mm (50.98 in)
Width
1186 mm (346.69 in)
Height
1053.8 mm (41.49 in)
Weight
908.4 kg (2002.7 lb)
  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
  • Control System
    • Electronic governing, PTO speed control
    • Programmable ratings
    • Automatic altitude compensation
    • Power compensation for fuel temperature
    • Programmable low and high idle and total engine limit
    • Electronic diagnostics and fault logging
    • Engine monitoring system SAE J1939 broadcast and control
    • ADEM A4 Electronic Control Unit (ECU)
  • Cooling System
    • Thermostats and housing, vertical outlet
    • Jacket water pump, centrifugal
    • Water pump, inlet
  • Exhaust System
    • Exhaust manifold, dry
    • Optional exhaust outlet
  • Flywheels and Flywheel Housing
    • SAE No. 1 flywheel housing
  • Fuel System
    • MEUI injection
    • Fuel filter, secondary (2 micron)
    • Fuel filter, tertiary (2 micron)
    • ACERT Technology
    • Fuel transfer pump
    • Fuel priming pump
  • Lube System
    • Crankcase breather
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Front sump oil pan
    • Oil dipstick
    • Gear driven oil pump
  • General
    • Vibration damper
    • Lifting eyes
    • Cold start capability to -20° C (-4° F)
    • Paint: Caterpillar yellow, with optional colors available at request