Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Industrial

Cat® C13 Industrial Power Unit

  • Minimum Rating
    385.0 bhp
  • Maximum Power
    440 HP
  • Maximum Rating
    440.0 bhp
  • Rated Speed
    1800-2100
Power Rating
Minimum Rating
385.0 bhp
Maximum Power
440 HP
Maximum Rating
440.0 bhp
Rated Speed
1800-2100
Minimum Power
385 HP
Rated Speed
1800-2100
Minimum Rating
385 BHP
Maximum Rating
440 BHP
Emission Standards
Emissions
China Stage II, U.S. EPA Tier 2 Equivalent or U.S. EPA Tier 3 Equivalent, EU Stage II Equivalent or EU Stage IIIA Equivalent
Emissions
China Stage II, U.S. EPA Tier 2 Equivalent or U.S. EPA Tier 3 Equivalent, EU Stage II Equivalent or EU Stage IIIA Equivalent
General
Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Bore
5.1 in
Bore
130 mm (5.1 in)
Bore
130 mm (5.1 in)
Stroke
6.2 in
Displacement
763 in³
Stroke
157 mm (6.2 in)
Stroke
157 mm (6.2 in)
Compression Ratio
17.0:1
Aspiration
Turbocharged Aftercooled (TA)
Displacement
12.5 L (763 in³)
Displacement
12.5 L (763 in³)
Combustion System
Direct Injection
Aspiration
Turbocharged Aftercooled (TA)
Rotation from Flywheel End
Counterclockwise
Compression Ratio
17:1
Aftertreatment
-
Combustion System
Direct Injection
Rotation
Counterclockwise
Cooling System Capacity
14.2 L (15 qt)
Cooling System
14.2 L (15 qt)
Power Unit Dimensions
Length
50.9 in
Width
46.7 in
Height
41.5 in
Weight
3730 lb
Power Unit Dimensions (Approximate. Final dimensions dependent on selected options)
Length
1295 mm (50.9 in)
Width
1186 mm (46.7 in)
Height
1054 mm (41.5 in)
Power Unit Dimensions - Approximate
Weight
1692 kg (3730 lb)
Width
1186 mm (46.7 in)
Height
1054 mm (41.5 in)
Length
1295 mm (50.9 in)
  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
  • Control System
    • Electronic governing, PTO speed control
    • Programmable ratings
    • Automatic altitude compensation
    • Power compensation for fuel temperature
    • Programmable low and high idle and total engine limit
    • Electronic diagnostics and fault logging
    • Engine monitoring system SAE J1939 broadcast and control
    • ADEM A4 Electronic Control Unit (ECU)
  • Cooling System
    • Thermostats and housing, vertical outlet
    • Jacket water pump, centrifugal
    • Water pump, inlet
  • Exhaust System
    • Exhaust manifold, dry
    • Optional exhaust outlet
  • Flywheels and Flywheel Housing
    • SAE No. 1 flywheel housing
  • Fuel System
    • MEUI injection
    • Fuel filter, secondary (2 micron)
    • ACERT Technology
    • Fuel transfer pump
    • Fuel priming pump
  • Lube System
    • Crankcase breather
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Front sump oil pan
    • Oil dipstick
    • Gear driven oil pump
  • General
    • Vibration damper
    • Lifting eyes
    • Cold start capability to -20° C (-4° F)
    • Paint: Caterpillar yellow, with optional colors available at request