Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Industrial

Cat® C2.2 Diesel Engine

  • Maximum Power
    74 HP
  • Maximum Torque
    199 lb-ft @ 1600 rpm
  • Rated Speed
    2800 rpm
  • Minimum Power
    60 HP
Power Rating
Maximum Power
74 HP
Maximum Torque
199 lb-ft @ 1600 rpm
Rated Speed
2800 rpm
Minimum Power
60 HP
Emission Standards
Emissions
U.S. EPA & CARB Tier 4 Final, EU Stage V
General
Engine Configuration
In-Line 4, 4-Stroke-Cycle Diesel
Bore
3.3 in
Bore
84 mm (3.3 in)
Stroke
3.9 in
Displacement
135 in³
Stroke
100 mm (3.9 in)
Compression Ratio
18.0:1
Aspiration
Turbocharged (T) or Turbocharged-Aftercooled (TA)
Displacement
2.2 L (135 in³)
Combustion System
Direct Injection
Rotation from Flywheel End
Counterclockwise
Aftertreatment
DOC+DPF
Cooling System
4.3 L (4.5 qt)
Lube System
9.3 L (9.8 qt)
Engine Dimensions - Approximate
Length
31.7 in
Width
21 in
Height
29.8 in
Weight
533.5 lb
Height
757 mm (29.8 in)
Length
807 mm (31.7 in)
Weight
242 kg (533.5 lbs)
Width
535 mm (21.0 in)
Aftertreatment Dimensions
Length
16.1 in
Diameter
6.1 in
Weight
12.8 lb
Aftertreatment Dimensions - Approximate
Diameter
155 mm (6.1 in)
Length
408.4 mm (16.07 in)
Weight
5.8 kg (12.79 lb)
  • Control System
    • Alternator 12 volt 85 amp
    • Starter motor 12 volt
    • Glow plug starting aid, delivers heat directly to cylinder for best starting performance in cold weather
    • Electronic control unit - chassis mounted
    • Flexible and configurable software features and well supported SAE J1939 CAN bus enables highly integrated machines
    • Wiring harness connectors and sensors are waterproof and designed to withstand harsh off-highway environments
  • Flywheels and Flywheel Housing
    • SAE No. 4 standard flywheel housing
    • Choice of flywheel weight and bolting pattern to accommodate a range of industry-standard hydraulic pumps and transmissions
  • Fuel System
    • 2000 bar high-pressure common rail system
    • Proprietary fuel filters to ensure engine protection through correct service procedures, along with water-in-fuel detection, ensures maximum machine up-time for the operator
  • Lube System
    • Alternative oil fillers
    • Spin-on lube oil filter
  • Power Take Off (PTO)
    • SAE A PTO drive
  • General
    • Cast iron engine block
    • Cast iron exhaust manifold
    • Gradeability 35° continuous
    • Paint: Cat yellow
  • U.S. EPA Tier 4 Final, EU Stage IIIB Aftertreatment/Clean Emissions Control Equipment
    • Diesel Oxidation Catalyst (DOC)