Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Industrial

Cat® C2.2 Diesel Engine

  • Maximum Power
    67.1 HP
  • Maximum Torque
    153 lb-ft @ 1800 rpm
  • Rated Speed
    2800 rpm
  • Minimum Power
    48.8 HP
Power Rating
Maximum Power
67.1 HP
Maximum Torque
153 lb-ft @ 1800 rpm
Rated Speed
2800 rpm
Minimum Power
48.8 HP
Emission Standards
Emissions
U.S. EPA & CARB Tier 4 Final
General
Engine Configuration
In-Line 4, 4-Stroke-Cycle Diesel
Engine Configuration
In-Line 4
Bore
3.3 in
Stroke
3.9 in
Bore
84 mm (3.3 in)
Displacement
135 in³
Compression Ratio
18.0:1
Stroke
100 mm (3.9 in)
Aspiration
Turbocharged (T) or Turbocharged-Aftercooled (TA)
Combustion System
Direct Injection
Displacement
2.2 L (135 in³)
Rotation from Flywheel End
Counterclockwise
Aftertreatment
DOC or DOC+DPF
Cooling System Capacity
4.3 L (4.5 qt)
Cooling System
4.3 L (4.5 qt)
Lube System
9.3 L (9.8 qt)
Lube System
9.3 L (9.8 qt)
Engine Dimensions - Approximate
Length
28.4 in
Width
21.4 in
Height
28.3 in
Weight
507 lb
Height
720 mm (28.3 in)
Length
723 mm (28.4 in)
Weight
230 kg (507 lbs)
Width
545 mm (21.4 in)
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
Length
764 mm (30.07 in)
Width
545 mm (21.5 in)
Height
736 mm (28.9 in)
Weight
230 kg (507 lbs)
Aftertreatment Dimensions
Length
16 in
Diameter
6.1 in
Weight
12.5 lb
Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)
Length
408.4 mm (16.07 in)
Weight
5.8 kg (12.79 lb)
Diameter
155 mm (6.1 in)
Length
408.4 mm (16.1 in)
Diameter
167 mm (6.6 in)
Aftertreatment Dimensions - Approximate
Diameter
155 mm (6.1 in)
Length
408.4 mm (16.0 in)
Weight
5.8 kg (12.8 lb)
  • Control System
    • Alternator 12 volt 85 amp
    • Starter motor 12 volt
    • Glow plug starting aid, delivers heat directly to cylinder for best starting performance in cold weather
    • Electronic control unit - chassis mounted
    • Flexible and configurable software features and well supported SAE J1939 CAN bus enables highly integrated machines
    • Wiring harness connectors and sensors are waterproof and designed to withstand harsh off-highway environments
  • Flywheels and Flywheel Housing
    • SAE No. 4 standard flywheel housing
    • Choice of flywheel weight and bolting pattern to accommodate a range of industry-standard hydraulic pumps and transmissions
  • Fuel System
    • 2000 bar high-pressure common rail system
    • Proprietary fuel filters to ensure engine protection through correct service procedures, along with water-in-fuel detection, ensures maximum machine up-time for the operator
  • Lube System
    • Alternative oil fillers
    • Spin-on lube oil filter
  • Power Take Off (PTO)
    • SAE A PTO drive
  • General
    • Cast iron engine block
    • Cast iron exhaust manifold
    • Gradeability 35° continuous
    • Paint: Cat yellow
  • U.S. EPA Tier 4 Final, EU Stage IIIB Aftertreatment/Clean Emissions Control Equipment
    • Diesel Oxidation Catalyst (DOC)