Industrial
Cat® C27 Diesel Engine
-
Maximum Power1050 HP
-
Maximum Torque3448 lb-ft @ 1200 rpm
-
Rated Speed1800 rpm
-
Minimum Power800 HP
Power Rating
- Maximum Power
- 1050 HP
- Maximum Torque
- 3448 lb-ft @ 1200 rpm
- Rated Speed
- 1800 rpm
- Minimum Power
- 800 HP
Emission Standards
- Emissions
- U.S. EPA Tier 4 Final
General
- Engine Configuration
- V-12, 4-Stroke-Cycle Diesel
- Engine Configuration
- V-12
- Bore
- 5.4 in
- Stroke
- 6 in
- Displacement
- 1649.5 in³
- Compression Ratio
- 16.0:1
- Aspiration
- Twin Turbocharged-Aftercooled (TTA)
- Combustion System
- Direct Injection
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- DOC
- Cooling System Capacity
- 67.9 L (71.7 qt)
- Lube System
- 68 L (71.9 qt)
Engine Dimensions - Approximate
- Length
- 73.8 in
- Width
- 63 in
- Height
- 53.9 in
- Weight
- 6625 lb
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
- Length
- 1874 mm (73.8 in)
- Width
- 1600 mm (63 in)
- Height
- 1370 mm (53.9 in)
- Weight
- 3004 kg (6625 lb)
-
Air Inlet System
- Turbocharged
- Air-to-Air Aftercooled
-
Control System
- Electronic control system
- Over-foam wiring harness
- Automatic altitude compensation
- Power compensated for fuel temperature
- Configurable software features
- Engine monitoring system SAE J1939 broadcast and control
-
Cooling System
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
-
Exhaust System
- Exhaust manifold, dry
- Optional exhaust outlet
-
Flywheels and Flywheel Housing
- Choice of SAE No. 0 or SAE No. 1 flywheel housing
-
Fuel System
- MEUI injection
- Fuel filter, secondary (2 micron)
- Fuel transfer pump
- Electronic fuel priming
-
Lube System
- Open crankcase ventilation system
- Oil cooler
- Oil filler
- Lube oil filter
- Rear sump oil pan
- Oil dipstick
- Gear driven oil pump
-
General
- Paint: Caterpillar yellow, with optional colors available at request
- Vibration damper
- Lifting eyes