Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Industrial

Cat® C7 Industrial Diesel Engine

  • Minimum Power
    225.0 bhp
  • Maximum Power
    300 HP
  • Maximum Power
    300.0 bhp
  • Rated Speed
    1800-2200 rpm
Power Rating
Minimum Power
225.0 bhp
Maximum Power
300 HP
Maximum Power
300.0 bhp
Rated Speed
1800-2200 rpm
Minimum Power
225 HP
Rated Speed
1800-2200 rpm
Emission Standards
Emissions
China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
Emissions
China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
General
Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Bore
110 mm (4.33 in)
Bore
110 mm (4.33 in)
Bore
4.3 in
Stroke
5 in
Stroke
127 mm (5.0 in)
Stroke
127 mm (5.0 in)
Displacement
442 in³
Displacement
7.2 L (442 in³)
Aspiration
Turbocharged Aftercooled (TA)
Displacement
7.2 L (442 in³)
Compression Ratio
16.2:1
Compression Ratio
16.2:1
Aspiration
Turbocharged Aftercooled (TA)
Combustion System
Direct Injection
Combustion System
Direct Injection
Rotation
Counterclockwise
Rotation from Flywheel End
Counterclockwise
Aftertreatment
-
Engine Dimensions - Approximate
Length
41.5 in
Width
29.8 in
Height
40.6 in
Weight
1296 lb
Height
1032 mm (40.6 in)
Length
1053 mm (41.5 in)
Weight
588 kg (1296 lb)
Width
758 mm (29.8 in)
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
Length
1053 mm (41.5 in)
Width
758 mm (29.8 in)
Height
1032 mm (40.6 in)
Weight
588 kg (1296 lb)
  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
  • Control System
    • Electronic governing, PTO speed control
    • Programmable ratings
    • Automatic altitude compensation
    • Power compensation for fuel temperature
    • Programmable low and high idle and total engine limit
    • Electronic diagnostics and fault logging
    • Engine monitoring system SAE J1939 broadcast and control
    • ADEM A4 Electronic Control Unit (ECU)
  • Cooling System
    • Thermostats and housing, vertical outlet
    • Jacket water pump, centrifugal
    • Water pump, inlet
  • Exhaust System
    • Exhaust manifold, dry
    • Optional exhaust outlet
  • Flywheels and Flywheel Housing
    • SAE No. 1 flywheel housing
  • Fuel System
    • HEUI injection
    • Fuel filter, secondary (2 micron)
    • ACERT Technology
    • Fuel transfer pump
    • Fuel priming pump
  • Lube System
    • Crankcase breather
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Front sump oil pan
    • Oil dipstick
    • Gear driven oil pump
  • General
    • Vibration damper
    • Lifting eyes
    • Cold start capability to -20° C (-4° F)
    • Paint: Caterpillar yellow, with optional colors available at request