New 415F2 Backhoe Loader for Sale

415F2 Backhoe Loader

Net Power

68 hp
Net Power

68 HP
Bore

3.90 in
Bore

3.9 in

Engine

Net Power: 68 hp
Net Power: 68 HP
Bore: 3.90 in
Bore: 3.9 in
Stroke: 4.33 in
Stroke: 4.33 in
Displacement: 207 in3
Displacement: 207 in³
Engine Model: Cat® C3.4B
Gross Power: 74 hp
Gross Power: 74 hp
Rated Net Power: 68 hp
Rated Net Power: 68 hp
Net Torque Rise: 88 %
Rated Net Power: 69 HP
Net Peak Power: 72 HP
Net Peak Power: 73 HP
Net Peak Power: 73 HP
Engine Model: Cat® C3.4B
Gross Power: 74 HP
Gross Power: 74 HP
Net Torque Rise: 88 %
Rated Net Power: 68 HP
Net Power: 68 HP
Net Peak Torque: 307 lbf-ft
Note: Engine meets U.S. EPA Tier 4 Final emission standards.
Rated Net Power: 68 hp
Rated Net Power: 68 hp
Net Peak Torque: 307 ft-lb
Note: Engine meets U.S. EPA Tier 4 Final emission standards.
Rated Net Power: 68 HP
Rated Net Power: 68 HP

Weights

Operating Weight: 24251 lb
Operating Weight: 24251 lb
Cab: 359 lb
Cab: 359 lb
Four Wheel Drive: 392 lb
Counterweights: 255 lb
Air Conditioning: 101 lb
Counterweights: 255 lb
Operating Weight: 15207 lb
Operating Weight: 24251 lb
MP Bucket: 1642 lb
Extendible Stick: 659 lb
Counterweights: 530 lb
Counterweights: 530 lb
Counterweights: 1015 lb
Counterweights: 1015 lb

Backhoe

Dig Depth: 14.3 ft
Dig Depth: 17.9 ft
Dig Depth: 17.9 ft

Hydraulic System

Pump Type: Variable Flow, Axial Piston
Pump Type: Variable Flow, Axial Piston
Type: Closed Center
Pump Capacity: 35 gal/min
System Pressure: 3336 psi
System Pressure: 3336 psi
System Pressure: 3336 psi
System Pressure: 3336 psi
Pump Capacity at 2: 35 gal/min
Type: Closed Center

Transmission

Power Shuttle Transmission: 3.4 mph
Power Shuttle Transmission: 5.5 mph
Power Shuttle Transmission: 12 mph
Power Shuttle Transmission: 5.5 mph
Power Shuttle Transmission: 12 mph
Power Shuttle Transmission: 23 mph
Power Shuttle Transmission: 3.4 mile/h
Power Shuttle Transmission: 5.5 mile/h
Power Shuttle Transmission: 12 mile/h
Power Shuttle Transmission: 23 mile/h
Power Shuttle Transmission: 3.4 mile/h
Power Shuttle Transmission: 5.5 mile/h
Power Shuttle Transmission: 12 mile/h
Power Shuttle Transmission: 23 mile/h

Service Refill Capacities

Fuel Tank: 42 gal
Engine Oil with Filter: 2.3 gal
Hydraulic System: 23.8 gal
Cooling System with Air Conditioning: 5.8 gal (US)
Transmission: 4 gal (US)
Transmission: 4 gal (US)
Rear Axle: 4.4 gal (US)
Rear Axle: 0.4 gal (US)
Front Axle: 2.9 gal (US)
Front Axle: 0.2 gal (US)
Engine Oil: 2.3 gal (US)
Fuel Tank: 42 gal (US)
Hydraulic System: 23.8 gal (US)
Hydraulic Tank: 10.6 gal
Note: Requires ultra-low sulfur fuel less than or equal to 15 ppm fuel sulfur.
Hydraulic Tank: 10.6 gal (US)
Note: Requires ultra-low sulfur fuel less than or equal to 15 ppm fuel sulfur.

Steering

Type: Front Wheel
Power Steering: Hydrostatic
Bore: 2.6 in
Stroke: 4.7 in
Rod Diameter: 1.4 in
Bore: 2.6 in
Power Steering: Hydrostatic
Rod Diameter: 1.4 in
Stroke: 4.7 in
Type: Front Wheel
Axle Oscillation: 11°
Turning Circle: 26.8 ft
Turning Circle: 36.0 ft
Axle Oscillation: 11°
Turning Circle: 26.8 ft
Turning Circle: 36 ft

Axle Ratings

Front Axle: 50582 lb
Rear Axle: 50582 lb
Front Axle: 50582 lb
Front Axle: 20233 lb
Front Axle: 20233 lb
Rear Axle: 20233 lb
Front Axle: 50582 lb
Rear Axle: 50582 lb

Tires

Choice 1: Front: 11L-16 (12 ply) F-3; Rear: 19.5L-24 (12 ply) R4 ATU
Choice 2: Front: 12.5/80-18-1810 PR I-3; Rear: 19.5L-24 12 PR R4
Choice 3: Front: 12-16.5 (10 ply); Rear: 19.5L-24 (12 ply) ATU
Choice 4: Front: 12-16.5 (12 ply); Rear: 19.5L-24 (12 ply) ATU, 20 PITCH
Choice 5: Front: 340-80R18 143B R-4; Rear: 500/70R24 157B, R-4
Choice 6: Front: 340-80R18 143B R-4; Rear: 19.5L-24, 12, ATU
Choice 7: Front: 340/80R18 XMCL 142A8; Rear: 500.70R24 XMCL 157A8
Choice 1: Front: 11L-16 (12 ply) F-3; Rear: 19.5L-24 (12 ply) R4 ATU
Choice 2: Front: 12.5/80-18-1810 PR I-3; Rear: 19.5L-24 12 PR R4
Choice 3: Front: 12-16.5 (10 ply); Rear: 19.5L-24 (12 ply) ATU
Choice 4: Front: 12-16.5 (12 ply); Rear: 19.5L-24 (12 ply) ATU, 20 PITCH

Standards

Cab: SAE J1040 MAY94; ISO 3741 1994
Cab: SAE J/ISO 3449 APR98 LEVEL II and ISO 3449: 1992 LEVEL II
Cab: ANSI/SAE J1166 OCT98 is 79 dB(A)
Cab: SAE J/ISO 3449 APR98 LEVEL II and ISO 3449: 1992 LEVEL II
Cab: SAE J1040 MAY94; ISO 3741 1994
Cab: ANSI/SAE J1166 OCT98 is 79 dB(A)
Brakes: SAE J/ISO 3450; ISO 3450 1996
Brakes: SAE J/ISO 3450; ISO 3450 1996
Exterior Sound: SAE J188 JUN86 is 76 dB(A)
Exterior Sound: SAE J188 JUN86 is 76 dB(A)

Engine Features

Feature: Regeneration is passive and does not require any input from the operator or disrupt work.
Feature: Three-ring pistons made of lightweight, silicon/aluminum alloy for strength and maximum thermal conductivity.
Feature: Forged chrome/molybdenum-steel crankshaft with salt bath nitrocarburized pins and journals.
Feature: Front and rear crankshaft oil seals are “lip” type Viton and PTFE designs featuring an integral dust lip.
Feature: For durability, inlet valves are nitrided, martensitic chrome silicon steel.
Feature: For durability, exhaust valves are nitrided, austenitic chrome manganese-nickel steel.
Feature: Cylinder block is high strength, cast iron alloy of deep skirt, monobloc design for increased strength and long life.
Feature: Cylinder head is high strength, cast iron alloy construction with extra duty wall and deck thickness.
Feature: Cylinder head's intake and exhaust ports are precision cast to promote optimum gas flow.
Feature: Direct injection fuel system provides accurate fuel delivery and efficiency.
Feature: Dry-type axial seal air cleaner with integral precleaner, automatic dust ejection system, and filter condition indicator.
Feature: Direct electric, 12-volt starting and charging system with 880 CCA Group 31 maintenance free battery.
Feature: Standard glow plug starting aid system for efficient cold weather starting.
Feature: High contact ratio/gear train, peripheral fixed isolation top cover and open deck block design reduce bare engine noise.
Feature: Higher low end torque for better engine/machine performance.
Feature: Engine is equipped with electric fuel priming pump.
Feature: Regeneration is passive and does not require any input from the operator or disrupt work.
Feature: Direct injection fuel system provides accurate fuel delivery and efficiency.
Feature: Dry-type axial seal air cleaner with integral precleaner, automatic dust ejection system, and filter condition indicator.
Feature: Direct electric, 12-volt starting and charging system with 880 CCA Group 31 maintenance free battery.
Feature: Standard glow plug starting aid system for efficient cold weather starting.
Feature: High contact ratio/gear train, peripheral fixed isolation top cover and open deck block design reduce bare engine noise.
Feature: Higher low end torque for better engine/machine performance.
Feature: Engine is equipped with electric fuel priming pump.
Feature: Three-ring pistons made of lightweight, silicon/aluminum alloy for strength and maximum thermal conductivity.
Feature: Forged chrome/molybdenum-steel crankshaft with salt bath nitrocarburized pins and journals.
Feature: Front and rear crankshaft oil seals are “lip” type Viton and PTFE designs featuring an integral dust lip.
Feature: For durability, inlet valves are nitrided, martensitic chrome silicon steel.
Feature: For durability, exhaust valves are nitrided, austenitic chrome manganese-nickel steel.
Feature: Cylinder block is high strength, cast iron alloy of deep skirt, monobloc design for increased strength and long life.
Feature: Cylinder head is high strength, cast iron alloy construction with extra duty wall and deck thickness.
Feature: Cylinder head's intake and exhaust ports are precision cast to promote optimum gas flow.

Brakes

Feature: Brakes meet the following standards: SAE J1473 and ISO 3450 requirements.
Feature: Self-adjusting, completely enclosed and sealed.
Feature: Foot operated brake pedals can be interlocked for roading.
Feature: Parking/secondary brakes are independent of the service brake system.
Feature: Parking brake is mechanically applied through an adjustable hand lever located on the right console.
Feature: Brakes meet the following standards: SAE J1473 and ISO 3450 requirements.
Feature: Self-adjusting, completely enclosed and sealed.
Feature: Foot operated brake pedals can be interlocked for roading.
Feature: Parking/secondary brakes are independent of the service brake system.
Feature: Parking brake is mechanically applied through an adjustable hand lever located on the right console.

Air cleaner
Alarm, back-up
Alternator, 150 amp
Audible system fault alarm
Backhoe controls, mechanical two lever
Battery, maintenance-free, 880 CCA
Battery disconnect switch
Battery remote jumpstart
Boom transport lock
Brace, lift cylinder
Brake, secondary parking
Brakes, hydraulically boosted, oil disc, dual pedals, interlocking
Bucket level indicator
Canopy, ROPS/FOPS
Coat restraint
Coolant/antifreeze, extended life
Counterweight, bumper
Dome light (cab only)
Diagnostic port for engine
Differential lock, loader joystick
Drink holders, two
Engine, Cat C3.4B, meets U.S. EPA Tier 4 Final emission standards, diesel particulate filter
Engine enclosure, sound suppression removal panels
Face seals, O-ring
Fan, suction and guard
Fast reversing shuttle, all gears
Fenders, rear
Filters, spin-on: fuel, engine oil, transmission oil, water separator
Filters, bowl and cartridge: hydraulic fluid
Flashing hazards/signal lights
Floor mat
Fuel tank, fully enclosed
Fully hinged front grill for cooling package cleaning access
Gauge cluster: coolant temperature, fuel level, torque converter temperature, battery voltage
Ground level fuel fill
High ambient cooling package
Hood lock, inside cab
Hydraulic hose, XT^™
Hydraulic oil cooler
Hydraulic oil level sight gauge
Hydraulic valve, hydrostatic steering
Hydraulic valves, loader 2 function
Hydraulic valves, backhoe 4 function
Hydraulics, load sensing with variable displacement piston pump
Indicator lights: wait to start, water in fuel, engine warning, warning lamp, object handling stability warning, manual regeneration required, low engine oil pressure; LCD warnings: machine locked (if equipped), service due, air filter blocked, auto idle shutdown, high coolant temperature, high torque converter temperature, high exhaust temperature, engine oil life indicator
Instrument panel lights
Key start/stop system
LCD screen: engine speed, hour meter, gear/direction, battery voltage, hydraulic oil temperature, torque converter temperature, coolant temperature, trip totals (fuel and hours), lifetime totals (fuel and hours), operator settings (units, brightness, programmable hoe auxiliary flow), service mode diagnostics, oil life reset, DPF force regeneration, maintenance intervals, ECM/system info
Lights, working (2 front, 2 rear)
Loader, self-leveling, return-to-dig and transmission disconnect switch
Loader, single tilt
Mirror, rearview
Open circuit breather
Power receptacle, 12 volt, 2 internal, 1 external
Power steering, hydrostatic
Seat belt, retractable, 51 mm (2 in)
Stabilizer shoes, street
Steering knob
Seat, air suspension, fabric or vinyl cover, with armrest
Socket, two roof
Starting system, glow plugs
Steering, hydrostatic
Storage compartment, lockable
Storage tray
Stop and tail lights
Swing transport lock
Tires
Toolbox, external, lockable
Torque converter
Throttle, hand and foot, electronic
Transmission, four speed, syncromesh
Transmission neutralizer switch
Transport tie-downs
Two Wheel Drive
Vandalism locks, three
Warning horn, electric

Backhoe controls, pilot joysticks
Battery, additional, 880 CCA
Cab, standard
Cold weather fuel (–30° C/–22° F)
Cold weather package, including additional battery, engine block heater, radiator antifreeze (–50° C/–58° F), cold weather fuel (–30° C/–22° F) and mounting for an ether bottle
Counterweights, 115 kg (255 lb), 240 kg (530 lb) or 460 kg (1,015 lb)
Fenders, front with integral steps
Four Wheel Drive/Brake Mode Selector
Guard, boom protection plate
Guard, stabilizer, rock
Hydraulic valves, loader (3rd valve for GP, MP or Quick Coupler)
Hydraulic valves, backhoe (5th and 6th function)
Hydraulic lines, combined function auxiliary
Product Link, satellite, PL631E
Product Link, cellular, PL641I
Quick Coupler, hydraulic, dual lock
Quick Coupler, manual, dual lock
Quick Coupler, pin lock
Radio and CD player
Radio and CD player, Bluetooth
Ride Control
Rotating beacon, magnetic mount
Seat belt, 75 mm (3 in)
Security system keypad
Stabilizer pads, grouser type
Stabilizer pads, reversible
Stick, extendible
Storage box
Vandalism protection, gauge cover
Work Tool Attachments such as buckets, forks, material handling arms, augers, hammers, brooms, cold planers and vibratory plate compactors. See your Cat dealer for more information.