Backhoe Loaders
430F2/430F2 IT Backhoe Loader
Engine
- Net Power
- 108 hp
- Net Power
- 108 HP
- Bore
- 4.13 in
- Bore
- 4.13 in
- Stroke
- 5 in
- Stroke
- 5 in
- Displacement
- 268 in3
- Displacement
- 268 in³
- Engine Model
- Cat® C4.4 ACERT™
- Gross Power
- 117 hp
- Gross Power
- 115 hp
- Rated Net Power
- 108 hp
- Rated Net Power
- 109 hp
- Rated Net Power
- 109 HP
- Net Peak Power
- 110 HP
- Net Peak Power
- 111 HP
- Net Peak Power
- 111 HP
- Net Torque Rise
- 39%
- Engine Model
- Cat® C4.4 ACERT™
- Gross Power
- 115 HP
- Gross Power
- 117 HP
- Rated Net Power
- 109 HP
- Net Power
- 108 HP
- Net Peak Torque
- 360 lbf-ft
- Note
- Engine meets Tier 4 Final emission standards.
- Rated Net Power
- 108 hp
- Rated Net Power
- 109 hp
- Net Peak Torque
- 360 ft-lb
- Note
- Engine meets Tier 4 Final emission standards.
- Rated Net Power
- 109 HP
- Rated Net Power
- 108 HP
Weights
- Operating Weight
- 24251 lb
- Operating Weight
- 24251 lb
- Cab
- 359 lb
- Ride Control
- 31 lb
- Ride Control
- 31 lb
- Air Conditioning
- 93 lb
- Air Conditioning
- 93 lb
- Counterweights
- 255 lb
- Counterweights
- 530 lb
- Counterweights
- 1015 lb
- Counterweights
- 1015 lb
- MP Bucket
- 1642 lb
- Extendible Stick
- 673 lb
- Operating Weight
- 17141 lb
- Auto
- 525 lb
- MP Bucket
- 1642 lb
- Extendible Stick
- 673 lb
- Loader
- 699 lb
- Operating Weight
- 24251 lb
- Operating Weight
- 24251 lb
Backhoe
- Dig Depth
- 15.4 ft
- Dig Depth
- 19.5 ft
- Dig Depth
- 19.5 ft
Hydraulic System
- Pump Type
- Variable Flow, Axial Piston
- Type
- Closed Center
- Pump Capacity
- 43 gal/min
- System Pressure
- 3600 psi
- System Pressure
- 3600 psi
- System Pressure
- 3600 psi
- Pump Capacity at 2
- 43 gal/min
- Type
- Closed Center
Transmission
- Power Shuttle Transmission
- 3.4 mile/h
- Power Shuttle Transmission
- 5.6 mile/h
- Power Shuttle Transmission
- 13 mile/h
- Power Shuttle Transmission
- 25 mile/h
- Power Shuttle Transmission
- 3.4 mile/h
- Power Shuttle Transmission
- 5.6 mile/h
- Power Shuttle Transmission
- 13 mile/h
- Power Shuttle Transmission
- 25 mile/h
- Auto
- 3.6 mile/h
- Auto
- 5.7 mile/h
- Auto
- 7 mile/h
- Auto
- 12 mile/h
- Auto
- 16 mile/h
- Auto
- 25 mile/h
- Auto
- 3.6 mile/h
- Auto
- 7.6 mile/h
- Auto
- 17 mile/h
- Auto
- 3.6 mile/h
- Auto
- 5.7 mile/h
- Auto
- 7 mile/h
- Auto
- 12 mile/h
- Auto
- 14 mile/h
- Auto
- 15 mile/h
- Auto
- 25 mile/h
- Auto
- 3.6 mile/h
- Auto
- 7.6 mile/h
- Auto
- 17 mile/h
- Auto
- 25 mile/h
Service Refill Capacities
- Fuel Tank
- 42 gal
- Diesel Exhaust Fluid
- 5 gal
- Engine Oil with Filter
- 2.3 gal
- Front Axle
- 0.2 gal
- Hydraulic System
- 25.1 gal
- Cooling System with Air Conditioning
- 5.9 gal (US)
- Transmission
- 4 gal (US)
- Rear Axle
- 4.4 gal (US)
- Rear Axle
- 0.4 gal (US)
- Front Axle
- 2.9 gal (US)
- Front Axle
- 0.2 gal (US)
- Diesel Exhaust Fluid
- 5 gal (US)
- Engine Oil
- 2.3 gal (US)
- Fuel Tank
- 42 gal (US)
- Hydraulic System
- 25.1 gal (US)
- Transmission
- 4.8 gal (US)
- Hydraulic Tank
- 10.6 gal
- Note
- * Must meet the requirements outlined in ISO 22241.
- Note
- Requires ultra-low sulfur fuel less than or equal to 15 ppm fuel sulfur.
- Hydraulic Tank
- 10.6 gal (US)
- Note
- * Must meet the requirements outlined in ISO 22241.
- Note
- Requires ultra-low sulfur fuel less than or equal to 15 ppm fuel sulfur.
Axle Ratings
- Front Axle
- 50582 lb
- Rear Axle
- 50582 lb
- Front Axle
- 50582 lb
- Front Axle
- 20233 lb
- Front Axle
- 20233 lb
- Rear Axle
- 20233 lb
- Front Axle
- 50582 lb
- Rear Axle
- 50582 lb
- Axle Oscillation
- 10 Degrees
Steering
- Type
- Front Wheel
- Power Steering
- Hydrostatic
- Bore
- 2.6 in
- Stroke
- 4.7 in
- Rod Diameter
- 1.4 in
- Axle Oscillation
- 11°
- Turning Circle
- 26.8 ft
- Turning Circle
- 36 ft
- Axle Oscillation
- 11°
- Bore
- 2.6 in
- Power Steering
- Hydrostatic
- Rod Diameter
- 1.4 in
- Stroke
- 4.7 in
- Type
- Front Wheel
Tires
- Choice 1
- Front: 12.5/80-18 (12 ply) 1-3; Rear: 19.5L-24 (12 ply) ATU
- Choice 2
- Front: 12.5/80-18 NHS (12 ply) 1-3; Rear: 21L-24 (16 ply) R4 ATU
- Choice 3
- Front: 340/80R18; Rear: 19.5L-24 (12 ply) R4 ATU
- Choice 4
- Front: 340/80R18; Rear: 500/70R24 RT
- Choice 1
- Front: 12.5/80-18 (12 ply) 1-3; Rear: 19.5L-24 (12 ply) ATU
- Choice 2
- Front: 12.5/80-18 NHS (12 ply) 1-3; Rear: 21L-24 (16 ply) R4 ATU
- Choice 3
- Front: 340/80R18; Rear: 19.5L-24 (12 ply) R4 ATU
- Choice 4
- Front: 340/80R18; Rear: 500/70R24 RT
Standards
- Cab
- SAE J1040 MAY94; ISO 3741 1994
- Cab
- SAE J/ISO 3449 APR98 LEVEL II and ISO 3449: 1992 LEVEL II
- Cab
- ANSI/SAE J1166 OCT98 is 79 dB(A)
- Cab
- SAE J/ISO 3449 APR98 LEVEL II and ISO 3449: 1992 LEVEL II
- Cab
- SAE J1040 MAY94; ISO 3741 1994
- Cab
- ANSI/SAE J1166 OCT98 is 79 dB(A)
- Brakes
- SAE J/ISO 3450; ISO 3450 1996
- Brakes
- SAE J/ISO 3450; ISO 3450 1996
- Exterior Sound
- SAE J188 JUN86 is 76 dB(A)
- Exterior Sound
- SAE J188 JUN86 is 76 dB(A)
Engine Features
- Feature
- Regeneration is passive and does not require any input from the operator or disrupt work.
- Feature
- Three-ring pistons made of lightweight, silicon/aluminum alloy for strength and maximum thermal conductivity.
- Feature
- Forged chrome/molybdenum-steel crankshaft with crankshaft with either induction hardened or nitrocarburized journals.
- Feature
- Front and rear crankshaft oil seals are “lip” type Viton and PTFE designs featuring an integral dust lip.
- Feature
- Heat resistant, silicone-chrome steel intake and STELLITE-faced exhaust valves provide long life.
- Feature
- Cylinder block is high strength, cast iron alloy of deep skirt, monobloc design for increased strength and long life.
- Feature
- Cylinder head is high strength, cast iron alloy construction with extra duty wall and deck thickness.
- Feature
- Cylinder head's intake and exhaust ports are precision cast to promote optimum gas flow.
- Feature
- Direct injection fuel system provides accurate fuel delivery; remote mounted electric lift pump improves serviceability.
- Feature
- Dry-type axial seal air cleaner with integral precleaner, automatic dust ejection system, and filter condition indicator.
- Feature
- Direct electric, 12-volt starting and charging system with 880 CCA Group 31 maintenance free battery.
- Feature
- Standard glow plug starting aid system for efficient cold weather starting.
- Feature
- High contact ratio/gear train, peripheral fixed isolation top cover and open deck block design reduce bare engine noise.
- Feature
- Higher low end torque for better engine/machine performance.
- Feature
- Engine is equipped with electric fuel priming pump.
- Feature
- Regeneration is passive and does not require any input from the operator or disrupt work.
- Feature
- Dry-type axial seal air cleaner with integral precleaner, automatic dust ejection system, and filter condition indicator.
- Feature
- Direct electric, 12-volt starting and charging system with 880 CCA Group 31 maintenance free battery.
- Feature
- Standard glow plug starting aid system for efficient cold weather starting.
- Feature
- High contact ratio/gear train, peripheral fixed isolation top cover and open deck block design reduce bare engine noise.
- Feature
- Higher low end torque for better engine/machine performance.
- Feature
- Engine is equipped with electric fuel priming pump.
- Feature
- Three-ring pistons made of lightweight, silicon/aluminum alloy for strength and maximum thermal conductivity.
- Feature
- Forged chrome/molybdenum-steel crankshaft with crankshaft with either induction hardened or nitrocarburized journals.
- Feature
- Front and rear crankshaft oil seals are “lip” type Viton and PTFE designs featuring an integral dust lip.
- Feature
- Heat resistant, silicone-chrome steel intake and STELLITE-faced exhaust valves provide long life.
- Feature
- Cylinder block is high strength, cast iron alloy of deep skirt, monobloc design for increased strength and long life.
- Feature
- Cylinder head is high strength, cast iron alloy construction with extra duty wall and deck thickness.
- Feature
- Cylinder head's intake and exhaust ports are precision cast to promote optimum gas flow.
- Feature
- Direct injection fuel system provides accurate fuel delivery; remote mounted electric lift pump improves serviceability.
Brakes
- Feature
- Brakes meet the following standards: SAE J1473 and ISO 3450 requirements.
- Feature
- Self-adjusting, completely enclosed and sealed.
- Feature
- Foot operated brake pedals can be interlocked for roading.
- Feature
- Parking/secondary brakes are independent of the service brake system.
- Feature
- Parking brake is mechanically applied through an adjustable hand lever located on the right console.
- Feature
- Brakes meet the following standards: SAE J1473 and ISO 3450 requirements.
- Feature
- Self-adjusting, completely enclosed and sealed.
- Feature
- Foot operated brake pedals can be interlocked for roading.
- Feature
- Parking/secondary brakes are independent of the service brake system.
- Feature
- Parking brake is mechanically applied through an adjustable hand lever located on the right console.
- Adjustable auxiliary controls, backhoe loader
- Air cleaner
- Alarm, back-up
- Alternator, 150 amp
- Audible system fault alarm
- Automatic Engine Speed Control (AESC)
- Battery, maintenance-free, 880 CCA
- Battery disconnect switch
- Battery remote jumpstart
- Boom transport lock
- Brace, lift cylinder
- Brake, secondary parking
- Brakes, hydraulically boosted, oil disc, dual pedals, interlocking
- Bucket level indicator
- Canopy, ROPS/FOPS
- Cat cushion swing system
- Coat restraint
- Coolant/antifreeze, extended life
- Counterweight, bumper
- Dome light (cab only)
- Diagnostic port for engine, machine and gauge cluster Electronic Control Modules
- Differential lock, loader joystick
- Engine, Cat C4.4 ACERT (Direct Injection Turbocharged), meets Tier 4 Final emission standards, selective catalyst reduction, diesel oxidation catalyst (DOC)
- Engine enclosure, sound suppression removal panels
- Face seals, O-ring
- Fan, suction and guard
- Fast reversing shuttle, all gears
- Fenders, rear
- Filters, spin-on: fuel, engine oil, transmission oil, water separator
- Filters, bowl and cartridge: hydraulic fluid
- Flashing hazards/signal lights
- Floor mat
- Four Wheel Drive
- Fuel tank, fully enclosed
- Fully hinged front grill for cooling package cleaning access
- Gauge cluster: coolant temperature, fuel level, torque converter temperature, DEF level
- Ground level fuel fill and DEF fill
- High ambient cooling package
- Hood lock, inside cab
- Hydraulic hose, XT™
- Hydraulic oil cooler
- Hydraulic oil level sight gauge
- Hydraulic valve, hydrostatic steering
- Hydraulic valves, loader 2 function
- Hydraulic valves, backhoe 5 function
- Hydraulics, load sensing with variable displacement piston pump
- Indicator lights: Eco mode active, water in fuel, remote dial throttle active, engine warning, warning lamp, emissions module malfunction, AESC active, low battery/charging system warning, high hydraulic oil temperature; LCD warnings: engine oil pressure, machine locked (if equipped), service due, air filter blocked, high coolant temperature, auto idle shutdown, high torque converter temperature, hydraulic filter bypass
- Instrument panel lights
- Joystick controls: pilot operated, excavator-style with pattern changer
- Key start/stop system
- LCD screen: engine speed, hour meter, gear/direction, battery voltage, hydraulic oil temperature, torque converter temperature, coolant temperature, trip totals (fuel and hours), lifetime totals (fuel and hours), operator settings (units, brightness, programmable hoe auxiliary flow), service mode diagnostics, oil life reset, DPF force regeneration, maintenance intervals, ECM/system info
- Lights, working (4 front, 4 rear)
- Loader, self-leveling, return-to-dig and transmission disconnect switch
- Loader, single tilt
- Mirror, rearview
- One-touch low idle
- Open circuit breather
- Pattern changer, in cab
- Power receptacle, 12 volt, 2 internal, 1 external
- Power steering, hydrostatic
- Radio ready cab
- Seat belt, retractable, 51 mm (2 in)
- Socket, two roof
- Stabilizer shoes, street
- Steering knob
- Seat, air suspension, fabric or vinyl cover, with armrest
- Starting system, glow plugs
- Steering, hydrostatic
- Storage compartment, lockable
- Storage tray
- Stop and tail lights
- Swing transport lock
- Tilt steering wheel
- Tires
- Toolbox, external, lockable
- Torque converter
- Throttle, hand and foot, electronic
- Transmission, four speed, syncromesh
- Transmission neutralizer switch
- Transport tie-downs
- Vandalism locks, four
- Warning horn, electric
- Battery, additional, 880 CCA
- Cab, deluxe
- Cold weather fuel (–30° C/–22° F)
- Cold weather package, including additional battery, engine block heater, radiator antifreeze, cold weather fuel (–30° C/–22° F) and mounting for an ether bottle
- Counterweights, 115 kg (255 lb), 240 kg (530 lb) or 460 kg (1,015 lb)
- Fenders, front with integral steps
- Guard, boom protection plate
- Guard, stabilizer, rock
- Hydraulic valves, loader (3rd valve for GP, MP or Quick Coupler)
- Hydraulic valves, backhoe 6 function
- Hydraulic lines, combined function auxiliary
- Loader, IT with Quick Coupler and pilot loader control
- Product Link, satellite, PL631E
- Product Link, cellular, PL641I
- Quick Coupler, hydraulic, dual lock
- Quick Coupler, manual, dual lock
- Quick Coupler, pin lock
- Radio and CD player
- Radio and CD player, Bluetooth
- Ride Control
- Rotating beacon, magnetic mount
- Seat belt, 75 mm (3 in)
- Seat, heated
- Security system keypad
- Stabilizer pads, reversible
- Stick, extendible
- Storage box
- Transmission, AutoShift
- Transmission, AutoShift with lock-up torque converter
- Vandalism protection, gauge cover
- Work Tool Attachments such as buckets, forks, material handling arms, augers, hammers, brooms, cold planers and vibratory plate compactors. See your Cat dealer for more information.
-
$32,000 2005 Cat 908
-
$51,000 2019 Cat 279D
-
$46,500 2017 Cat 299D2
-
$40,000 2016 Cat 299D2
-
$200,000 2015 Cat 336FL
-
Browse All Used Equipment Inventory
View More