Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Compact Wheel Loaders

914M Compact Wheel Loader

  • Net Power
    97 HP
  • Engine Model
    Cat C4.4 ACERT�
  • Maximum Gross Power
    100 HP
  • Maximum Gross Power
    101 HP
Engine
Net Power
97 HP
Engine Model
Cat C4.4 ACERT�
Maximum Gross Power
100 HP
Maximum Gross Power
101 HP
Maximum Gross Power
2350 r/min
Maximum Gross Power
102 HP
Rated Net Power
2200 r/min
Rated Net Power
96 HP
Maximum Gross Power
100 HP
Bore
4.13 in
Displacement
268 in³
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Maximum Gross Torque
332 ft·lbf
Maximum Gross Torque
336 ft·lbf
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Rated Net Power
97 HP
Rated Net Power
98 HP
Stroke
5 in
Weights
Operating Weight
19315 lb
Service Refill Capacities
Cooling System
5.7 gal (US)
Fuel Tank
40.7 gal (US)
Engine Crankcase
2.3 gal (US)
Hydraulic System
25.9 gal (US)
Axles
2 gal (US)
Axles
2 gal (US)
Diesel Exhaust Fluid
5 gal (US)
Hydraulic Tank
14.5 gal (US)
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Transmission
0.9 gal (US)
Operating Specifications
Rated Bucket Capacity
2.5 yd³
Buckets
Bucket Capacities
1.3-1.9 m3 (1.7-2.5 yd3)
Cab
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Note
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
Note
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
Note
*The measurements were conducted with the cab doors and windows closed.
Axles
Front
Fixed; Locking differential (standard)
Rear
Oscillating �11 degrees; Locking differential (Standard)
Engine - Tier 4 Final/Stage IV
Maximum Net Torque
329 ft·lbf
Maximum Net Torque
325 ft·lbf
Loader Hydraulic System
Hydraulic Cycle Time
1.4 s
Hydraulic Cycle Time
3.7 s
Hydraulic Cycle Time
2.2 s
Hydraulic Cycle Time
5.2 s
Hydraulic Cycle Time
12.5 s
Maximum Flow
39 gal/min
Maximum Flow
32 gal/min
Maximum Flow
24 gal/min
Maximum Flow
24 gal/min
Maximum Working Pressure
4061 psi
Relief Pressure
4931 psi
Relief Pressure
3046 psi
Relief Pressure
3046 psi
Steering
Maximum Flow
22 gal/min
Maximum Working Pressure
3263 psi
Number of Steering Wheel Turns
3.75 turns
Steering Articulation Angle
40 °
Steering Cycle Times
2.8 s
Tires
Note
Other tire choices are available. Contact your Cat dealer for details.
Note
In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Note
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Other Choices Include
17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport�
Standard Size
17.5-25 12PR
Transmission
Forward and Reverse
25 mile/h
Forward and Reverse
6.3 mile/h
Forward and Reverse
12.5 mile/h
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.