New 854K Wheel Dozer for Sale

854K Wheel Dozer

Engine Model

Cat® C32 ACERT™
Gross Power

907.0 hp
Bore

5.7 in
Stroke

6.4 in

Engine

Engine Model: Cat® C32 ACERT™
Gross Power: 907.0 hp
Bore: 5.7 in
Stroke: 6.4 in
Displacement: 1958.0 in3
Torque Rise: 30.0 %
Emissions: 907.0 hp
Emissions: 900.0 hp
Peak Torque: 3139.0 lb ft
Rated Speed: 1750.0 RPM
Engine Model: Cat® C32 ACERT™
Gross Power: 907 HP
Emissions: 900 HP
Emissions: 814 HP
Emissions: 907 HP
Emissions: 814 HP
Rated Speed: 1750 r/min
Bore: 5.7 in
Stroke: 6.4 in
Displacement: 1958 in²
Peak Torque: 3139 lb/ft
Torque Rise: 30 %
Note: Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
Note: Net torque rise meets SAE J139.
Note: No engine derating required up to 3050 m (10,000 ft) altitude.

Weights

Operating Weight: 224254.0 lb
Operating Weight: 241230.0 lb
Operating Weight: 224254 lb

Transmission

Converter Drive: 4.4 mph
Converter Drive: 7.7 mph
Converter Drive: 13.2 mph
Converter Drive: 4.8 mph
Converter Drive: 8.4 mph
Converter Drive: 14.6 mph
Direct Drive: 8.1 mph
Direct Drive: 14.2 mph
Direct Drive: 5.0 mph
Direct Drive: 8.9 mph
Direct Drive: 15.6 mph
Direct Drive: Lock-up disabled
Transmission Type: Cat Planetary Power Shift
Transmission Type: Cat Planetary Power Shift
Converter Drive: 4.4 mile/h
Converter Drive: 7.7 mile/h
Converter Drive: 13.2 mile/h
Converter Drive: 4.8 mile/h
Converter Drive: 8.4 mile/h
Converter Drive: 14.6 mile/h
Direct Drive: Lock-up disabled
Direct Drive: 8.1 mile/h
Direct Drive: 14.2 mile/h
Direct Drive: 5 mile/h
Direct Drive: 8.9 mile/h
Direct Drive: 15.6 mile/h
Note: Travel speeds based on 45/65-45 L-5 46 ply tires.

Steering

Relief Valve Setting: 5004.0 psi
Minimum Turning Radius: 31.0 ft
Total Steering Angle: 82.0 Degrees
Minimum Turning Radius: 31 ft
Minimum Turning Radius: 31 ft
Total Steering Angle: 86 °
Hydraulic Output at 1: 124 gal/min
Relief Valve Setting: 5004 psi

Service Refill Capacities

Fuel Tank: 413.0 gal
Cooling System: 53.0 gal
Crankcase: 32.0 gal
Transmission: 45.0 gal
Differentials and Final Drives: 98.0 gal
Differentials and Final Drives: 90.0 gal
Fuel Tank: 353.0 gal
Fuel Tank: 413 gal (US)
Cooling System: 53 gal (US)
Crankcase: 32 gal (US)
Transmission: 45 gal (US)
Differential: 98 gal (US)
Differential: 90 gal (US)
Hydraulic System: 81 gal (US)
Hydraulic System: 77 gal (US)

Cab

Air Conditioning: Standard air conditioning system contains environmentally friendly R134a refrigerant
FOPS: FOPS meets SAE J231 JAN81 and ISO 3449:1992 Level II criteria.
ROPS: ROPS meets SAE J11040 APR88, ISO 3471:2008 and ISO 3471:1994 criteria.
Air Conditioning: Standard air conditioning system contains environmentally friendly R134a refrigerant
Cab: Cat cab with separate ROPS/FOPS is standard in North America, Europe and Japan.
Cab: SAE J1040 MAY94, ISO 3471:2008, ISO 3471:2005
ROPS: ROPS meets SAE J1040 MAY94, ISO 3471:2008 and ISO 3471:1994 criteria.
FOPS: FOPS meets SAE J231 JAN81 and ISO 3449:1992 Level II criteria.
Sound Performance: The dynamic operator sound pressure level is 71 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab.
Sound Performance: The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) is 87 dB(A).
Sound Performance: Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.
Sound Performance: The operator sound exposure Leq measured according to work cycle procedures specified in ANSI/SAE J1166 FEB08 is 71 dB(A).

Brakes

Brakes: Meets ISO 3540:1996
Brakes: Meets ISO 3540:2011

Axles

Front: Fixed
Rear: Oscillating at ±10 degrees
Maximum Single: 22.6 in
Front: Fixed
Rear: Oscillating at ±10 degrees
Maximum Single: 22.6 in

Hydraulic System - Lift/Tilt

Cylinder: 177 mm × 1760 mm (0.58 ft × 5.8 ft)
Output at 1: 161 gal/min
Cylinders: 177 mm × 1760 mm (0.58 ft × 5.8 ft)
Cylinder: 267 mm × 286 mm (0.88 ft × 0.94 ft)
Relief Valve Setting: 3289 psi
Relief Valve Setting: 3560 psi

Hydraulic System - Ripper (Optional)

Cylinder: 184 mm × 454 mm (0.60 ft × 1.5 ft)
Main Relief Pressure: 2800.0 psi
Output at 1: 56.0 gal/min

Dimensions (Approximate)

Center Line of Front Axle to Hitch: 9.66 ft
Center Line of Rear Axle to Edge of Bumper: 13.76 ft
Center Line of Rear Axle to Edge of Ripper Mount: 13.8 ft
Departure Angle: 14.0 Degrees
Ground Clearance: 27.0 in
Height to Top of Exhaust Pipe: 17.17 ft
Height to Top of Hood: 13.0 ft
Height to Top of ROPS: 18.34 ft
Length with Blade and Ripper on Ground: 51.2 ft
Length with Blade on Ground: 44.0 ft
Maximum Ripper Depth: 2.2 ft
Maximum Ripper Raise: 3.9 ft
Wheelbase: 19.3 ft
Width Between Outside Tines: 10.2 ft
Width Between Tines: 5.1 ft
Height: 18.25 ft
Height: 17.17 ft
Height: 13 ft
Ground Clearance: 27 in
Centerline of Front Axle to Hitch: 9.67 ft
Centerline of Rear Axle to Edge of Bumper: 13.75 ft
Wheel Base: 19.25 ft
Length: 44 ft

Blades

Blade Capacities: 25 to 45 m³ (33 to 58 yd³)

Model 854K (Tier 4)

Serial Number Prefix: KK6

Model 854K (Tier 2)

Serial Number Prefix: RM6

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
ELECTRICAL
- Alarm, back-up
- Alternator (150-amp)
- Batteries, low maintenance
- Deutsch & Amp Seal terminal connectors
- ECM diagnostic connector
- Ground level electrical disconnect
- Ground level starting receptacle for emergency start
- Lighting system, halogen (front and rear)
- Lighting, access stairway
- Starter, electric (heavy duty)
- Starting and charging system (24-volt)
OPERATOR ENVIRONMENT
- Advisor display
- Air conditioner and heater with automatic temperature control
- Cab, sound suppressed, pressurized, rollover protective structure (ROPS/FOPS) Radio ready for (entertainment) includes antenna, speakers, and 1 × 12V converters (24-volt, 10 amp) for use with laptop/cell phone
- Cigar lighter and ashtray
- Coat hook
- Electro-hydraulic tilt and lift control system locks
- Heater and defroster
- Horn, electric
- Implement and steering lockouts
- VIMS 3G monitoring system:
  – Action alert system, three category
  – Instrumentation, gauges:
     · Engine Coolant Temperature
     · Fuel Level
     · Hydraulic Oil Temperature
     · Tachometer
     · Transmission Gear Indicator
     · Transmission Oil Temperature
- Light, dome (cab)
- Lunchbox and beverage holders
- Mirrors, rearview (externally mounted)
- Seat belt, retractable, 76 mm (3 in) wide operator and trainer seats
- Seat, Cat Comfort (cloth) air suspension
- STIC control system
- Tinted glass
- Wet-arm wipers/washer (front, rear, and corners), intermittent front wipers
POWER TRAIN
- Air-to-Air After cooler (ATAAC)
- Auto Idle Kickdown
- Axle oil coolers (front and rear)
- Brakes, fully hydraulic, enclosed, wet multiple disc service brakes and dry parking/secondary brake
- Case drain filters
- Delayed Engine Shutdown
- Demand fan
- Electric fuel priming pump
- Engine, Cat C32 ACERT
- Ground level engine shutdown
- Ground level fast fill fuel
- Ground level transmission lockout
- Ground level starter lockout
- Idle Engine Shutdown
- Precleaner, engine air intake
- Next Generation Modular Radiator (NGMR)
- Starting aid (ether), automatic
- Throttle lock
- Transmission, 533 mm (21 in) planetary, powershift with 3F/3R, electronic control
- Venturi Exhaust Stacks
OTHER STANDARD EQUIPMENT
- Autolube
- Automatic bucket lift/tilt kickouts, electronically adjustable from cab
- Bumper service center
- Couplings, Cat O-ring face seals
- Doors, service access (locking)
- Emergency platform egress
- Fenders, steel (front and rear)
- Grouped hydraulic pressure ports
- Guards, power train and crankcase
- Hitch, drawbar with pin
- Hoses, Cat XT^™ and XT-ES
- Hydraulic oil cooler
- Impeller clutch
- Implement and steering ecology drains
- Mufflers, under hood
- Oil sampling valves
- Piston pump case drain filters
- Electro-hydraulic blade controls
- Product Link^™
- Service center with ground level electrical and fluids service center
- Sight gauges:
  – Coolant level
  – Implement oil level
  – Steering oil level
  – Transmission oil level
- Starter lockout, bumper
- Stairway, left and right rear access
- Steering, load sensing
- Toe kicks
- Transmission lockout, bumper
- Vandalism protection caplocks
- Windshield cleaning platforms
- Venturi Stack
TIRES, RIMS, AND WHEELS
- A tire must be selected from the mandatory attachments section. Base machine price includes a tire allowance.
ANTIFREEZE
- Premixed 50 percent concentration of extended life coolant with freeze protection to –34° C (–29° F)

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
BLADES
- Semi-U – 25.4 m³ (33.1 yd³)
- HD Semi-U – 25.4 m³ (33.1 yd³)
- Coal – 44.7 m³ (58.2 yd³)
ELECTRICAL
- 10A converter
- HID lights
- Object Detection
- Rear vision camera
- LED strobe warning beacons
OPERATOR ENVIRONMENT
- AM/FM/CD/MP3 radio
- Cab precleaner
- Sirius/USB/Bluetooth Radio
- Sun Screen
STARTING AIDS
- Engine coolant 120V heater
- Engine coolant 240V heater
MACHINE CONTROL AND GUIDANCE
- CAES attachment ready option
MISCELLANEOUS ATTACHMENTS
- Arctic Antifreeze for protection to –50° C (–58° F)
- Diagnostic lines
- Roading fenders