Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Dozers

D11T/D11T CD Dozer

  • Engine Model
    Cat® C32 ACERT™
  • Engine Model
    Cat® C32
  • Flywheel Power
    850 HP
  • Bore
    5.7 in
Engine
Engine Model
Cat® C32 ACERT™
Engine Model
Cat® C32
Flywheel Power
850 HP
Bore
5.7 in
Bore
5.7 in
Stroke
6.4 in
Stroke
6.4 in
Displacement
1959 in3
Displacement
1959 in³
Net SAE J1349
850 hp
Engine Power
908 hp
Engine Power
913 hp
Emissions
U.S. EPA Tier 4 Final
Engine Power
850 hp
Emissions
U.S. EPA Tier 4 Final
Engine Power
913 HP
Engine Power
908 HP
Engine Power
850 HP
Net SAE J1349
850 HP
Note
* Excludes all fan losses.
Note
Engine ratings apply at 1,800 rpm.
Note
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
Note
No derating required up to 3658 m (12,000 ft) altitude. High altitude attachment available for greater than 3658 m (12,000 ft).
Note
* Excludes all fan losses.
Note
Engine ratings apply at 1,800 rpm.
Note
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
Note
No derating required up to 3658 m (12,000 ft) altitude. High altitude attachment available for greater than 3658 m (12,000 ft).
Weights
Operating Weight
229800 lb
Shipping Weight
82640 lb
Operating Weight
248500 lb
Shipping Weight
83340 lb
Note
D11T Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.
Note
D11T Shipping Weight: Base machine chassis with cab and pivot shaft. Doesn’t include ROPS, ripper, blade, track, or roller frames.
Note
D11T CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, single-shank ripper, and operator.
Note
D11T CD Shipping Weight: Base machine chassis with cab and pivot shaft. Doesn’t include ROPS, ripper, blade, track, or roller frames.
Note
D11T Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.
Note
D11T Shipping Weight: Base machine chassis with cab and pivot shaft. Doesn't include ROPS, ripper, blade, track, or roller frames.
Note
D11T CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, single-shank ripper, and operator.
Note
D11T CD Shipping Weight: Base machine chassis with cab and pivot shaft. Doesn't include ROPS, ripper, blade, track, or roller frames.
Transmission
1 Forward
2.4 mile/h
2 Forward
4.2 mile/h
3 Forward
7.3 mile/h
1 Reverse
2.9 mile/h
2 Reverse
5.1 mile/h
3 Reverse
8.7 mile/h
Type
Planetary powershift
Type
Planetary powershift
Transmission Clutch Diameter
21 in
Hydraulic Controls
D11T CD
177.0 gal/min
D11T CD
Gear-type pump
D11T CD
3500.0 psi
D11T CD
3500.0 psi
D11T CD
66.0 gal/min
D11T CD
3600.0 psi
D11T CD
3500 psi
D11T
3300 psi
D11T
164 gal/min
D11T
Gear-type pump
D11T
3300 psi
D11T
3300 psi
D11T
3525 psi
D11T
41 gal/min
D11T CD
177 gal/min
D11T CD
Gear-type pump
D11T CD
3500 psi
D11T CD
3500 psi
D11T CD
66 gal/min
D11T CD
3600 psi
Note
Pump output measured at 1,800 engine rpm and 6895 kPa (1,000 psi).
Note
Electro-hydraulic pilot valves assist operations of ripper and dozer controls.
Note
Complete system consists of pump, tank with filter, oil cooler, valves, lines, and control levers.
Note
Pump output measured at 1,800 engine rpm and 6895 kPa (1,000 psi).
Note
Electro-hydraulic pilot valves assist operations of ripper and dozer controls.
Note
Complete system consists of pump, tank with filter, oil cooler, valves, lines, and control levers.
Undercarriage
Shoe Type
Extreme Service
Width
28 in
Shoes
41
Grouser Height
4 in
Pitch
12.5 in
Track Gauge
114 in
Length of Track on Ground
175.0 in
Length
175 in
Ground Contact Area
9781 in²
Track Rollers
8
Number of Carrier Rollers
1 per side (optional)
Number of Carrier Rollers
1 per side (optional)
Ground Clearance
30.6 in
Width
36 in
Ground Contact Area
12605 in²
Ground Clearance
30.6 in
Note
* Includes grouser height for total dimensions on hard surface.
Note
Sleeve Bearing Track with Positive Pin Retention.
Note
* Includes grouser height for total dimensions on hard surface.
Note
Sleeve Bearing Track with Positive Pin Retention.
Service Refill Capacities
Fuel Tank
425 gal
Fuel Tank
425 gal (US)
Cooling System
71.1 gal
Cooling System
71.1 gal (US)
Engine Crankcase
27.2 gal (US)
Power Train
90.9 gal
Power Train
90.9 gal (US)
Final Drive
12.4 gal (US)
Roller Frames
24.8 gal (US)
Pivot Shaft Compartment
18.8 gal (US)
Implement Hydraulic System
58.9 gal (US)
Fuel Tank
505 gal (US)
Fuel Tank
470 gal (US)
Note
* With oil filters.
Note
* With oil filters.
Track Roller Frame
Oscillation
13.8 in
Steering and Brakes
Hydraulically Applied Multiple
17.3 in
Spring Applied Multiple
24.1 in
Standards
ROPS
Rollover Protective Structure (ROPS) meets the following criteria: SAE J1040 MAY94, ISO 3471:1994.
FOPS
Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
FOPS
Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
ROPS
Rollover Protective Structure (ROPS) meets the following criteria: SAE J1040 MAY94, ISO 3471:1994.
Sound
The operator Equivalent Sound Pressure Level (Leq) is 79 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. This is a dynamic cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with th
Sound
The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) according to the test procedures specified in SAE J88 APR95, mid-gear-moving operation, is 87 dB(A).
Sound
The operator Equivalent Sound Pressure Level (Leq) is 79 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. This is a dynamic cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with th
Sound
The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) according to the test procedures specified in SAE J88 APR95, mid-gear-moving operation, is 87 dB(A).
Dimensions (Approximate) - D11T
Ground Clearance
31.4 in
Track Gauge
114 in
Width
148.9 in
Width
172.4 in
Height
173.4 in
Height
179.1 in
Height
185.9 in
Drawbar Height
37.1 in
Length
175 in
Overall Length
242.5 in
Length
242.5 in
Length
337.8 in
Length
340.2 in
Length
319.2 in
Length
331.8 in
Overall Length
414.4 in
Note
*Includes grouser height for total dimensions on hard surfaces.
Note
D11T shown equipped with 710 mm (28 in) shoes.
Dimensions (Approximate) - D11T CD
Ground Clearance
31.4 in
Track Gauge
114 in
Width
149.8 in
Width
172.4 in
Height
173.4 in
Height
179.1 in
Height
185.9 in
Drawbar Height
37.1 in
Length
175 in
Overall Length
242.5 in
Length
242.5 in
Length
345.1 in
Length
319.2 in
Length
331.8 in
Overall Length
421.7 in
Note
*Includes grouser height for total dimensions on hard surfaces.
Note
**CD Blade on D11T CD.
Note
D11T shown equipped with 710 mm (28 in) shoes.
  • ELECTRICAL
    • Alternator, 150 amp
    • Back up alarm
    • Batteries, 12-volt (4), 200 amp-hour
    • Converters, 12-volt, 10 amp and 20 amp
    • Diagnostic connector
    • Horn, forward warning
    • Lights, engine compartment
    • Lighting system, five (5) HID/seven (7) Halogen
    • Starting receptacle
  • OPERATOR ENVIRONMENT
    • Advisor-electronic monitoring system
    • Air conditioner and heater
    • Armrest, adjustable
    • Cab, FOPS
    • Deactivation switch, hydraulic controls
    • Decelerator, pedal
    • Finger Tip Control (FTC) steering
    • Governor switch, electronic
    • Hydraulic system: – Electronically controlled for bulldozer and ripper control
    • Mirror, rearview
    • Radio ready, entertainment
    • ROPS rollbar
    • Seat belt, retractable 76 mm (3 in)
    • Seat, cloth, air suspension
    • Wipers, intermittent, low and high speeds
  • POWER TRAIN
    • Cat C32
    • Aftercoolers, air-to-air
    • Air filters, dual with precleaner
    • Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG
    • Controlled throttle shifting
    • Coolant, extended life
    • Shift management
    • Engine Idle Shutdown Timer
    • Engine precleaner
    • Ether starting aid, automatic
    • Four planet, double-reduction planetary final drives
    • Fuel priming pump, electric
    • High speed oil changing system
    • Hydraulic demand fan
    • Copper Grommetted Tube Radiator - Serial number prefix JEL and JNS
    • Mufflers, dual
    • Parking brake, electronic
    • Prescreener
    • Separator, water/fuel
    • Thermal shields
    • Torque divider
    • Transmission, powershift: – (3F/3R speeds)
  • TECHNOLOGY
    • Auto blade assist
    • Enhanced auto shift
    • Product Link (satellite)
    • VIMS 3G
  • UNDERCARRIAGE
    • Equalizer bar end pin grease fittings, remote
    • Rollers and idlers, lifetime lubricated
    • Sprocket rim segments, replaceable
    • Suspension-type undercarriage, eight-roller tubular track roller frame
    • Three bolt idler and roller caps
    • Track adjusters, hydraulic
    • Track guides
    • Two-piece master links
  • SAFETY AND SECURITY
    • Anchorage points
    • Fender guard rails
    • Heavy duty steps and handles
    • Operator not present monitoring system
    • Slope and side-slope monitor
  • OTHER STANDARD EQUIPMENT
    • Bottom guards
    • CD ROM parts book
    • Dual-tilt blade control
    • Ecology drains
    • Engine enclosure
    • Fluid sampling ports
    • Grade control ready
    • Ground level service center
    • Ripper Hydraulics
    • Vandalism, protection (8 caplocks)
  • GUARDS
    • Bottom guards, sealed
    • Bottom guards, partial
    • Guard, undercarriage idlers
    • Screens, grill door
  • OPERATOR STATION
    • Air conditioner: – Fender – ROPS
    • Cab glass: – 276 kPa (40 psi) – Dual pane impact resistant
    • Heated and ventilated seat
    • Operator arrangement: – 5th percentile arrangement – Quick opening
    • Powered precleaner
    • Visibility arrangements (camera and mirrors): – Single camera – Dual camera – Mirrors
    • Window shades
  • POWER TRAIN
    • Engine coolant, arctic
    • Engine precleaner, turbine
    • Engine prelube
    • Fan arrangements: – Hydraulic screens – Reversing (Not available on D11T Carrydozer.) – Reversing with screens (Not available on D11T Carrydozer.)
    • Final drives: – Clamshell guard
    • High altitude arrangement (Not available on D11T Carrydozer.)
    • Copper Grommetted Tube Radiator - Serial number prefix AMA and MDG
    • Remote power train and engine high speed oil change system located at the ground level service center
  • UNDERCARRIAGE
    • Carrier rollers
    • Carrier rollers – cold weather
    • Tracks, PPR, sealed and lubricated: – 710 mm (28 in) Extreme Service (Not available on D11T Carrydozer.) – 710 mm (28 in) Extreme Service abrasion resistant material (Not available on D11T Carrydozer.) – 710 mm (28 in) Extreme Service trapezoidal hole (Not available on D11T Carrydozer.) – 810 mm (32 in) Extreme Service – 810 mm (32 in) Extreme Service abrasion resistant material – 810 mm (32 in) Extreme Service trapezoidal hole – 810 mm (32 in) Extreme Service tall links – 810 mm (32 in) Extreme Service tall links abrasion resistant material – 810 mm (32 in) Extreme Service trapezoidal hole tall links – 915 mm (36 in) Extreme Service clipped – 915 mm (36 in) Extreme Service clipped abrasion resistant material – 915 mm (36 in) Extreme Service clipped trapezoidal hole – 915 mm (36 in) Extreme Service clipped tall links
    • Undercarriage arrangements: – Abrasion – Cold abrasion – Cold weather – Sound
  • BULLDOZER ATTACHMENTS
    • 11CD Abrasion resistant blade
    • 11CD No wear plate
    • 11SU Abrasion resistant blade (Not available on D11T Carrydozer.)
    • 11SU Abrasion resistant blade, black (Not available on D11T Carrydozer.)
    • 11SU No wear plate (Not available on D11T Carrydozer.)
    • 11U Abrasion resistant blade (Not available on D11T Carrydozer.)
    • 11U Abrasion resistant blade, black (Not available on D11T Carrydozer.)
    • 11U No wear plate (Not available on D11T Carrydozer.)
  • REAR ATTACHMENTS
    • Counterweight, rear
    • CapSure hammerless installation and positive retention system: – Single shank – Multi shank – Single shank deep
    • Drawbar, rear (Not available on D11T Carrydozer.)
    • Multi shank ripper: – Carrydozer – Leach Pad (Not available on D11T Carrydozer.) – Standard (Not available on D11T Carrydozer.)
    • Ripper lube
    • Single shank ripper: – Carrydozer/heavy – Push block (Not available on D11T Carrydozer.) – Standard (Not available on D11T Carrydozer.)
  • TECHNOLOGY
    • Command for Dozing (Installed by dealer.)
    • Machine control, performance: – AutoCarry – Automatic ripper control
    • Terrain for Grading: – With blade control
  • SAFETY AND SECURITY
    • Access arrangement (ladder and platform)
    • Fuel tank: – Platform ready – Extra capacity
    • Lights: – LED – LED, high intensity – Warning, strobe
    • Powered access ladder
    • Rear access platform
  • OTHER ATTACHMENTS
    • Automatic lubrication system
    • Grease points, grouped
    • Heater, engine coolant
    • Heater, fuel
    • Hydraulic lines, AutoCarry
    • Hydraulic lines, screens
    • Hydraulic lines, screens and AutoCarry