New D8T Dozer for Sale

D8T Dozer

Engine Model

Cat C15
Power

354 HP
Net Power

354 HP
Net Power

359 mhp

Engine

Engine Model: Cat C15
Power: 354 HP
Net Power: 354 HP
Net Power: 359 mhp
Emissions: U.S. EPA Tier 4 Final/EU Stage V/Korea Tier 4 Final
Build Number: 21A
Note: Net power at 1,900 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at the t
Note: All non-road Tier 4 Interim and Final, Stage IIIB, IV and V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel bl
Note: Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.

Weights

Operating Weight: 87600 lb

Transmission

Power Train: Fully Automatic 4-Speed Powershift

Service Refill Capacities

Fuel Tank: 165 gal (US)
DEF Tank: 6 gal (US)

Dimensions - LGP

Ground Pressure: 7.7 psi

Standard SU

Operating Weight: 88698 lb
Ground Pressure: 13 psi
Width of Standard Shoe: 24 in
Blade: Semi-Universal (SU)
Blade Capacity: 13 yd³

LGP

Operating Weight: 84906 lb
Ground Pressure: 8 psi
Width of Standard Shoe: 38 in
Blade: Semi-Universal (SU)
Blade Capacity: 12.9 yd³

Waste Handler

Operating Weight: 88206 lb
Ground Pressure: 13 psi
Width of Standard Shoe: 24 in
Blade: Semi-Universal (SU) Landfill
Blade Capacity: 21 yd³

LGP Waste Handler

Operating Weight: 93672 lb
Ground Pressure: 8.8 psi
Width of Standard Shoe: 38 in
Blade: Semi-Universal (SU) Landfill
Blade Capacity: 27.9 yd³

Air Conditioning System

Air Conditioning: The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.5 kg of refrigerant which has a CO2 equivalent of 3.575 metric tonnes.

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
Power Train
- C15 Diesel Engine, Electronic Unit Injection (EUI), Aftertreatment to meet U.S. EPA Tier 4 Final/Korea Tier 4 emission standards
- 24V electric start
- Air-to-air aftercooler (ATAAC)
- Air filter with electronic service indicator
- Extended life coolant
- Auto reversing suction fan
- Four planet, double-reduction planetary final drives
- Electric fuel priming pump
- High performance single plane cooling system
- Electronic parking brake
- Precleaner, strata-tube dust ejector
- Prescreener
- Shift management: Full Auto Shift
- Sound attenuated exhaust system
- Automatic ether starting aid
- Torque divider with lock-up clutch
- Transmission control module, electronic
- Transmission, electronically-controlled powershift
- Turbocharger
- Water separator
Operator Environment
- Access/egress lighting with shutdown timer
- Adjustable armrests
- Air suspension seat
- Cab, ROPS/FOPS, sound suppressed
- Decelerator pedal
- Heater and ventilation
- Interior LED courtesy lights
- Rearview mirror
- Provision for wire passage in/out of cab
- Radio, AM/FM, Bluetooth
- ROPS mounted air conditioner
- Seat belt, retractable
- Steering control, direction and speed control thumb switches with recall button
- Touch screen operator interface: Electronic monitoring system, Diagnostic service information, Operator preferences
- Wipers, intermittent
Cat Technology
- Grade control ready
- Compatibility with radios and base stations from Trimble, Topcon, and Leica
- Capability to install 3D grade systems from Trimble, Topcon, and Leica
Power Train, Engine, Brakes
- Brakes, Basic or Extreme Service
- Engine precleaner, basic or with screen
Bottom Guards
- Standard
Electrical
- Back-up alarm
- Converter, 24V to 12V
- Diagnostic connector
- Ground level service center with hour meter
- Horn, forward warning
Final Drives
- Final drives: LGP or Guarded
- Final drives: Standard, Guarded or Arctic
Hydraulics
- Dozer tilt and fan hydraulics: Single Tilt or Dual Tilt
- Electronically enabled quick drop valve
- Hydraulics, electronically controlled, load-sensing dozer lift and tilt
- Hydraulics, electronically controlled, load-sensing rear hydraulics, ripper or winch ready
- Hydraulics, independent steering and work tool pumps
Other Standard Equipment
- Engine compartment service light
- Equalizer bar, pinned
- Front pull device
- Hinged bottom guards
- HVAC box, corrosive resistant
- Product Link
- S-O-S sampling ports
- 6-light package
- Electronically controlled power differential steering
- Vandalism protection for fluid compartments
Starters, Batteries, And Alternators
- Alternators: 150 Amp, Basic or Ducted
- Batteries: Heavy duty or Arctic
- Engine coolant heater (120V)
- Starting receptacle, auxiliary
Undercarriage
- Positive Pin Retention Track (44 Section, sealed and lubricated, single grouser shoes)
- 610 mm (24 in) Moderate Service track
- 8-roller tubular track roller frame (Carrier roller ready)
- Gauge arrangements: Standard or LGP
- Rollers and idlers, lifetime lubricated
- Sprocket rim segments, replaceable
- Suspension-type undercarriage
- Track adjusters, hydraulic
- Track guide
- Two-piece master links

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
Power Train, Engine, Brakes
- C15 Diesel Engine, Electronic Unit Injection (EUI), Aftertreatment to meet EU Stage V emission standards
- Engine, thermal shield
- Oil change system, high speed
- Radiator, 6.35 fins per inch, debris
Operator Environment
- Cab glass: Single pane, Enhanced Dual Pane or 40 psi
- Cab platform: Standard, Quick Opening or 5th Percentile
- Cab seat: Cloth, heated
- Cab seat: Heated and ventilated
- Visibility arrangements: Basic or Single camera
Cat Technology
- Attachment Ready Option (ARO), single tilt or dual tilt
- AutoCarry/AutoRip, single tilt or dual tilt
- Cat Grade with 3D
- Command for Dozing Ready
- Machine control, basic, single tilt or dual tilt
- Product Link: Cellular or Dual mode
Bulldozers
- 8A
- 8SU LGP
- 8SU/U: basic, guarded or dual tilt guarded
- 8U LGP: single tilt guarded or dual tilt guarded
Blades
- Angle Blade
- LGP Angle
- LGP SU
- LGP SU Landfill
- Semi-Universal (SU)
- SU Landfill with Wear Plate
- SU with Performance Cutting Edges
- SU with Push Plate
- SU with Rock Guard, Performance Cutting Edges
- SU with Rock Guard, Wear Plate
- Universal
- Universal Landfill
- Universal with Rock Guard, Wear Plate
Undercarriage
- Positive Pin Retention (PPR) Undercarriage: Suspended, Guarded or Arctic
- 610 mm (24 in) Moderate Service PPR Track
- 610 mm (24 in) Extreme Service PPR Track
- 610 mm (24 in) Extreme Service PPR Track, trapezoidal
- 610 mm (24 in) Extreme Service PPR Track, trapezoidal
- 660 mm (26 in) Extreme Service PPR Track
- 710 mm (28 in) Extreme Service PPR Track
- 710 mm (28 in) Moderate Service PPR Track
- 965 mm (38 in) Moderate Service PPR Track
- 710 mm (28 in) Moderate Service PPR Track, trapezoidal
- Heavy duty, extended life undercarriage track (44 Section, sealed and lubricated, single grouser shoes)
- Heavy duty, extended life undercarriage: Suspended, Guarded or Arctic
- 610 mm (24 in) Extreme Service HDXL Track
- 660 mm (26 in) Extreme Service HDXL Track
- 700 mm (27.5 in) Extreme Service HDXL Track
- Carrier rollers: Suspended, Suspended Arctic or No carrier rollers
Bottom Guards
- Bottom guards with front counterweight
- Heavy duty, sealed
- Powered
- Wood chip
Electrical
- Light, warning strobe
- Lighting groups: Basic, Premium or Sweeps
- Mount, light, warning strobe
Guards
- Fan debris guard
- Fast fuel guard
- Fuel tank guard
- Grill debris guard
- Rear screen
- Front striker bars
- Sweeps group
Hydraulics
- Rear attachment hydraulics: Ripper, Winch or None
Other Attachments
- Black paint, blade
- Additional counterweight
- Ecology drains
- Grab handles, push arm
- PA140VS winch
- W12 E PTO winch
- Window shades
Rear Attachments
- Rear counterweight
- Rigid drawbar
- Multi-shank ripper
- Multi-shank ripper with striker bar
- No rear attachment
- PA140VS winch, variable speed
- Rear striker bar
- Single shank ripper with pin puller
- Single shank ripper with puller and striker bar
- Single shank ripper with striker bar
Ripper Shank Teeth
- Multi-shank
- Single shank
- Single shank, deep ripping