Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Hydraulic Mining Shovels

6030 AC Hydraulic Mining Shovel

  • Output
    1000 kW
  • Bucket Payload
    34 ton (US)
  • Operating Weight
    324 ton (US)
  • Note
    Specifications shown above apply to Face Shovel configuration.
Electric Motor - 6030 AC/6030 AC FS
Output
1000 kW
Type
Squirrel cage induction motor
Voltage
6.6 kV ± 10% (other on request)
Rated Current IN
110 A (at 6.6 kV)
Frequency
50 Hz (60 Hz on request)
Revolutions
1,500 min-1 (1,800 min-1 at 60 Hz)
Starting current
350% of IN (197% of IN optional)
General
Bucket Payload
34 ton (US)
Operating Weight
324 ton (US)
Note
Specifications shown above apply to Face Shovel configuration.
Engine Output
1530 HP
Electrical System
System Voltage
24 V
Batteries
2 X 210 Ah 12 V each; 210 Ah 24 V in total
Operating Weights
6030
3.25 ft
6030
648810 lb
6030
31.7 psi
Note
Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, and lubricants.
6030 FS
648810 lb
6030 FS
31.7 psi
6030 FS
3.25 ft
Service Refill Capacities
Hydraulic Tank
745 gal (US)
Hydraulic System
872 gal (US)
Cooling System
25 gal (US)
Swing Drive
20 gal (US)
Grease Tank
119 gal (US)
Hydraulic System with Pump Managing System
Main Pumps
4 x variable swash plate pumps
Main Pumps
4 x 543 L/min (4 x 143 gal/min)
Maximum Pressure
4495 psi
Maximum Pressure
5220 psi
Swing Pumps
2 x reversible swash plate double pumps
Swing Pumps
2 x 426 L/min (2 x 113 gal/min)
Maximum Pressure
5075 psi
Hydraulic Tank Capacity
660 gal (US)
Swing Pumps
2 — 394 L/min (2 — 104 gal/min)
Total Volume of Hydraulic Oil
925 gal (US)
Main Pumps
4 — 552 L/min (4 — 146 gal/min)
Hydraulic Oil Cooling
Oil Flow of Cooling Pumps
2 x 459 L/min (2 x 121 gal/min)
Features
2 Fans
Diameter
48 in
Features
Fan speed is thermostatically controlled
Features
Cooling system is fully independent
Oil Flow of Cooling Pumps
2 — 467 L/min (2 — 123 gal/min)
Diameter
2 — 1220 mm (2 — 48 in)
Swing System
Swing Drive
2 compact planetary transmissions with axial piston motors
Parking Brakes
Wet multiple-disc brake, spring-loaded/hydraulically released
Maximum Swing Speed
5 r/min
Swing Ring
Triple-race roller bearing with sealed internal gearing
Features
Swing circuit is closed-loop with torque control
Maximum Swing Speed
4.6 r/min
Undercarriage
Travel Speed
2 Stages
Travel Speed
0.9 mile/h
Travel Speed
1.7 mile/h
Maximum Tractive Force
367880 lbf
Gradeability
50 %
Track Pads
44
Bottom Rollers
7
Components
Cast double-grouser track pads with bushings connected by hardened full floating pins
Support Rollers
2 plus a skid plate in between
Components
All running surfaces of sprockets, idlers, rollers and pad links, as well as teeth contact areas of sprocket and pad links, are hardened
Travel Drives
1 planetary transmission with 2 two-stage axial piston motors
Components
Fully hydraulic self-adjusting track tensioning system with membrane accumulator
Parking Brakes
Fully hydraulic self-adjusting track tensioning system with membrane accumulator
Components
1 planetary transmission with 2 two-stage axial piston motors
Components
Automatic hydraulic retarder valve to prevent over-speed on downhill travel
Operator's Cab
Operator
21.33 ft
Internal Dimensions of Cab
7.22 ft
Internal Dimensions of Cab
5.25 ft
Internal Dimensions of Cab
7.05 ft
Components
Under roof mounted heating ventilating and air conditioning system
Components
External sun shields at side and rear windows
Components
Robust instrument panel including large colored BCS screen with transflective technology
Components
Board Control System (BCS) electronic monitoring and data logging system for vital signs and service data of engines, hydraulic system and lubrication system
Components
Powered 38° access ladder
Components
Emergency egress safety harness
Components
Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
Components
Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head- and armrests
Components
Roller blinds at all windows
Components
Windshield with parallel intermittent wiper/washer
Components
All-round safety glass, armored windshield and sliding side window
Components
Operator Protective Guard (Top Guard) (ISO 10262:1998 Level II)
Components
Joystick controls integrated in independently adjustable seat consoles
Components
Fold-away auxiliary seat with safety belt
Attachments
All buckets
Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth
All buckets
Wing shrouds on side walls and heel shrouds at bottom edges
Shovel attachment with unique TriPower kinematics ensuring the following main features
Automatic roll-back limiter to prevent material spillage and kinematic assistance to hydraulic forces
Shovel attachment with unique TriPower kinematics ensuring the following main features
Horizontal automatic constant-angle bucket guidance €“ Vertical automatic constant-angle bucket guidance
Shovel attachment with unique TriPower kinematics ensuring the following main features
Constant boom momentum throughout the whole lift arc and crowd force assistance
Type
Catwalks with rails at booms
Type
Special wear packages for highly abrasive materials on request
Type
Pressure-free lowering of boom and stick by means of a float valve
Type
Welding procedures allow for internal counter-welding (double prep weld) wherever possible
Type
Booms and sticks are stress-relieved after welding
Type
Booms and sticks are torsion-resistant, welded box design of high-tensile steel with solid steel castings at pivot areas
Bucket
Bucket Capacity
21.6 yd³
Bucket Capacity
22.2 yd³
Digging Forces
Maximum Crowd Force
291700 lbf
Maximum Breakout Force
214390 lbf
Working Ranges
Maximum Digging Height
45.6 ft
Maximum Digging Reach
44.9 ft
Maximum Digging Depth
8.2 ft
Automatic Lubrication System
Capacity
120 gal (US)
Type
Dual-circuit system with hydraulically driven heavy-duty pump and electronic time relay control to adjust the pause/lube times
Type
Connected to the lubrication system are the swing roller bearing with internal gearing and all pivot points of attachment, bucket and cylinders
Type
Lubricated pinion for greasing of internal gearing of swing ring
Type
System failures displayed by Board Control System
Type
Grease filters (200 µm) between service station and container as well as directly behind grease pump
Retractable Service Station
Installation
Retractable, easily accessible, ground-level service station installed underneath the engine module
Electrical System - Diesel Drive
Components
14 LED service lights
System Voltage
24V
Components
2 LED high-brightness access flood lights
Batteries in Series
4 — 210 Ah €“ 12V each; 420 Ah €“ 24V in total
Components
Battery isolation relays
Components
12 LED high-brightness working flood lights €“ 8 for working area €“ 2 for rear end
Components
Emergency stop switches accessible from ground level and in engine module
Diesel Engines
Maximum Altitude
1640 ft
Bore
5.42 in
Make
2 — Cat C27 ACERT
Components
Micro processed engine management
Displacement
1648 in³
Stroke
6 in
Components
Hydraulically driven radiator fan with electronically controlled fan speed
Components
Two-stage fuel filter, including water separator
Aspiration
Turbocharged and charge air-cooled
Alternators
2 — 150A
Components
Heavy-duty air filters
Total Rated Net Power
1140 kW 1,800 min-1 (1,530 hp 1,800 min-1)
Total Rated Gross Power
1140 kW 1,800 min-1 (1,530 hp 1,800 min-1)
Total Rated Net Power
1140 kW 1,800 min-1 (1,530 hp 1,800 min-1)
Components
Additional high-capacity water separator
Number of Cylinders
12
Fuel Tank Capacity
1339 gal (US)
Emissions
Meets U.S. EPA Tier 2 equivalent emission standards
Engine
Engine Model
2 — Cat® C27 ACERT„¢
Note
Electric drive option available (1000 kW) on 6030 AC/6030 AC FS
Net Power
1530 HP
Gross Power
1530 HP
Operating Specifications
Operating Weight
326 t
Bucket Payload
34 t
Operating Weight
324 t
  • GENERAL
    • Export crating
    • Custom paint
  • SUPERSTRUCTURE
    • Oil change interval extension for engine oil up to 1,000 hours
    • Hydraulic service crane on superstructure with auxiliary engine
    • Round container for a standard 200 L (53 gal) grease barrel (instead of 450 L (119 gal) grease container)
    • Cold-weather package
  • CAB
    • Cab heating
    • Dual (redundancy) HVAC system
    • Camera monitoring system
    • Windshield guard (FOGS)
  • UNDERCARRIAGE
    • Track pad width 800 mm (2 ft 7 in) or 1200 mm (3 ft 11 in)
    • Cover plate under carbody (belly plate)