New 6050/6050 FS Hydraulic Shovel for Sale

6050/6050 FS Hydraulic Shovel

Engine Output

1880 kW (2,520 hp)
Engine Output

2520 HP
Standard Bucket Capacity

Face Shovel: 18.0 - 28.0 m3 (23.5 - 36.6 yd3); Backhoe: 28.0 m3 (36.6 yd3)
Bucket Payload

55.6 ton (US)

General

Engine Output: 1880 kW (2,520 hp)
Engine Output: 2520 HP
Standard Bucket Capacity: Face Shovel: 18.0 - 28.0 m3 (23.5 - 36.6 yd3); Backhoe: 28.0 m3 (36.6 yd3)
Bucket Payload: 55.6 ton (US)
Operating Weight: Face Shovel: 528 tonnes (582 tons); Backhoe: 537 tonnes (592 tons)
Operating Weight: 591.9 ton (US)
Note: Specifications above apply to Backhoe configuration. Face Shovel and Frontless configurations are also available.

Hydraulic System with Pump Managing System

Hydraulic Tank Capacity: 1320 gal (US)
Hydraulic Tank Capacity: 1450 gal (US)
Main Pumps: 4 × variable flow axial piston pumps
Main Pumps: 4 × 933 L/min (4 × 246 gal/min)
Main Pumps: 4 × 912 L/min (4 × 241 gal/min)
Maximum Pressure: 4350 psi
Maximum Pressure: 5080 psi
Maximum Pressure: 4930 psi
Swing Pumps: 3 × reversible swash plate pumps
Swing Pumps: 4 × reversible swash plate pumps
Swing Pumps: 3 × 491 L/min (3 × 131 gal/min)
Swing Pumps: 4 × 351 L/min (4 × 93 gal/min)
Total Volume of Hydraulic Oil: 1930 gal (US)
Total Volume of Hydraulic Oil: 2060 gal (US)

Hydraulic Oil Cooling

Features: Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running
Components: Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers
Diameter: 4 × 1170 mm (4 × 46 in)
Features: Extremely high cooling efficiency to ensure optimum oil temperature
Features: Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running
Oil Flow of Cooling Pumps: 4 × 491 L/min (4 × 130 gal/min)
Oil Flow of Cooling Pumps: 4 × 488 L/min (4 × 129 gal/min)
Features: Fan speed and flow of oil to the coolers are thermostatically controlled

Operator's Cab

Board Control System: Electronic monitoring & data logging system for vital signs & service data of engines, hydraulic systems & lubrication systems
Components: Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head and armrests
Components: Robust instrument panel including large colored BCS screen with transflective technology
Components: Windshield with parallel intermittent wiper/washer
Components: All-round safety glass, armored windshield and sliding side window
Components: FOPS (rock guard; approved according to DIN ISO 3449) integrated into cab structure
Components: Fold-away auxiliary seat with safety belt
Components: Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
Components: External sun shields at side and rear windows
Components: Joystick controls integrated in independently adjustable seat consoles
Components: Under roof mounted heating ventilating and air conditioning system
Internal Dimensions: 7.05 ft
Internal Dimensions: 7.22 ft
Internal Dimensions: 5.25 ft
Operator: 24.93 ft
Components: Emergency rescue seat
Components: Emergency ladder mounted to the A-frame
Components: Machine access via retractable boarding ladder, hydraulically operated
Components: Roller blinds at all windows

Operator’s Cab

Components: External sun shields at side and rear windows
Components: Robust instrument panel including large colored BCS screen with transflective technology
Components: Emergency rescue seat
Components: Emergency ladder mounted to the A-frame

Swing System

Features: Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody
Features: Hydraulic braking of the swing motion by counteracting control
Features: Closed-loop swing circuit with torque control
Features: Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody
Maximum Swing Speed: 4 r/min
Maximum Swing Speed: 3.8 r/min
Parking Brakes: Wet multiple disc brake, spring-loaded/hydraulically released
Swing Drive: 4 compact planetary transmissions with axial piston motors
Swing Ring: Triple-race roller bearing with sealed internal gearing
Features: All raceways and the internal gearing of swing ring supplied by automatic central lubrication system

Undercarriage

Bottom Rollers: 6
Components: All running surfaces of sprockets, idlers, rollers and pad links, as well as teeth contact areas of sprocket and pad links, are hardened
Components: Fully hydraulic, self-adjusting track tensioning system with membrane accumulator
Components: Automatic hydraulic retarder valve to prevent over-speed on downhill travel
Components: Acoustic travel alarm
Components: Cast double-grouser combined pad links with bushings connected by hardened full floating pins
Components: Bottom rollers are connected to the automatic lubrication system
Gradeability: 50 %
Maximum Tractive Force: 578900 lb
Parking Brakes: Wet multiple disc brake, spring-applied/hydraulically released
Support Rollers: 2 plus a skid plate in between
Track Pads: 39
Travel Drives: 1 planetary transmission with 2 two-stage axial piston motors
Travel Speed: 0.99 mile/h
Travel Speed: 1.44 mile/h

Automatic Lubrication System

Capacity: 264 gal (US)
Type: System failures displayed by Board Control System
Type: Connected to the lube system are: - raceways of the swing roller bearing - two greasing pinions for the internal gearing of the swing ring
Type: Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times
Type: Grease filters (200 μm) between service station and container, as well as directly behind grease pump
Type: Grease filters (200 μm) between service station and container, as well as directly behind grease pump
Type: Connected to the lube system are: - pivot points of attachment, bucket and cylinders - bottom rollers of undercarriage

Operating Weights

6050 FS: 25.9 N/cm2 (37.5 psi)
6050 FS: Other track pads available on request
6050 FS: 1163150 lb
6050 FS: 4.59 ft
6050: 26.3 N/cm2 (38.1 psi)
6050: Other track pads available on request
6050: 1183870 lb
6050: 4.59 ft

Electrical System (diesel drive)

Components: Thirteen (13) LED service lights

Electrical System - Diesel Drive

Alternators: 2 × 175A each
Batteries in Series: 6 × 210 Ah - 12V each; 630 Ah - 24V in total
Components: Thirteen (13) LED service lights
Components: Battery isolation relays
Components: Emergency stop switches accessible from ground level, in engine module and in operator's cab
Components: Ten (10) LED high-brightness working flood lights - Eight (8) for working area - Two (2) for rear end
Components: Two (2) LED high-brightness access flood lights
System Voltage: 24V

Retractable Service Station

Installation: Retractable service station installed underneath the engine module and easily accessible from ground.

Attachments

All buckets: - Wing shrouds on side walls - Heel shrouds at bottom edges
Type: Special wear packages for highly abrasive materials on request
All buckets: - Special liner material covering main wear areas inside and outside of bucket - Lip shrouds between teeth
Shovel attachment with unique TriPower kinematics ensuring the following main features: - Automatic roll-back limiter to prevent material spillage - Kinematic assistance to hydraulic forces
Shovel attachment with unique TriPower kinematics ensuring the following main features: - Horizontal automatic constant-angle bucket guidance - Vertical automatic constant-angle bucket guidance
Shovel attachment with unique TriPower kinematics ensuring the following main features: - Constant boom momentum throughout the entire lift arc - Crowd force assistance
Type: Inspection hole in booms
Type: Catwalks with rails at booms
Type: Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
Type: Guards for shovel cylinders (FS)
Type: Welding procedures allow for internal counter-welding (double prep weld) wherever possible
Type: Booms and sticks are stress-relieved after welding
Type: Booms and sticks are torsion-resistant, welded box design of high tensile steel with massive steel castings at pivot areas

Diesel Engines - Version 1 - Cummins® K1500E Tier 1

Aspiration: Turbocharged and aftercooled
Bore: 6.25 in
Components: Hydraulically driven radiator fan with electronically controlled fan speed
Components: Two-stage fuel filter including water separator
Components: Pre-lube starting system
Components: Eliminator with centrifuge for engine oil filtration
Components: Microprocessed engine control
Components: Heavy-duty air filters with automatic dust evacuation
Components: Additional high-capacity water separator
Displacement: 2300 in³
Emissions: U.S. EPA Flex
Fuel Tank Capacity: 2820 gal (US)
Make: 2 × Cummins K1500E
Maximum Altitude: 8000 ft
Number of Cylinders: 12
Stroke: 6.25 in
Total Rated Gross Power: 1880 kW 1,800 min-1 (2,520 hp 1,800 min-1)
Total Rated Net Power: 1880 kW 1,800 min-1 (2,520 hp 1,800 min-1)
Total Rated Net Power: 1880 kW 1,800 min-1 (2,520 hp 1,800 min-1)

Diesel Engines - Version 2 - Cummins® QSK38 Tier 2

Aspiration: Turbocharged and aftercooled
Bore: 6.25 in
Components: Additional high-capacity water separator
Components: Hydraulically driven radiator fan with electronically controlled fan speed
Components: Eliminator with centrifuge for engine oil filtration
Components: Pre-lube starting system
Components: Microprocessed engine control
Components: Heavy-duty air filters with automatic dust evacuation
Components: Two-stage fuel filter including water separator
Displacement: 2300 in³
Emissions: U.S. EPA Flex
Fuel Tank Capacity: 2820 gal (US)
Make: 2 × Cummins QSK38
Maximum Altitude: 10500 ft
Number of Cylinders: 12
Stroke: 6.25 in
Total Rated Gross Power: 1880 kW 1,800 min-1 (2,520 hp 1,800 min-1)
Total Rated Net Power: 1880 kW 1,800 min-1 (2,520 hp 1,800 min-1)
Total Rated Net Power: 1880 kW 1,800 min-1 (2,520 hp 1,800 min-1)

Engine

Engine Model: 2 × Cummins K1500E or 2 × Cummins QSK 38
Gross Power: 2520.0 hp
Net Power: 2520.0 hp
Note: Electric drive option available (1600 kW) on 6050 AC/6050 AC FS
Engine Model: 2 × Cummins K1500E or 2 × Cummins QSK 38
Gross Power: 2520 HP
Net Power: 2520 HP

Bucket

Bucket Capacity: 36.6 yd³
Bucket Capacity: 34 yd³

Operating Specifications

Bucket Payload: 55 t
Bucket Payload: 52 t
Operating Weight: 592 t
Operating Weight: 582 t

Electric Motor - 6050 AC/6050 AC FS

Frequency: 50 Hz (60 Hz on request)
Output: 2146 HP
Rated Current IN: 174 A (at 6.6 kV)
Revolutions: 1,500 min-1 (1,800 min-1 at 60 Hz)
Starting current: 350% of IN (197% of IN optional)
Type: Power limit control by Pump Management System
Type: Squirrel cage induction motor
Type: Custom-made electric motor with increased gap between rotor and stator to withstand severe mining conditions
Voltage: 6.6 kV ± 10% (other on request)

GENERAL
- Custom paint
SUPERSTRUCTURE
- Hydraulic service crane on superstructure with auxiliary engine
- Mesabi radiators instead of standard radiators
- Oil change interval extension for engine oil up to 1,000 hours
- Oil change interval extension for engine oil with oil burn system
- Folding access stairway, stairway angle approximately 45°
- Two round containers for two standard 200 L (53 gal) barrels (instead of 1000 L (264 gal) grease container)
- Filling of round containers via service station
- Various cold-weather options
CAB
- Dual (redundancy) heating ventilating and air conditioning system
- Cab heating
- Additional instrumentation
- Camera monitoring system
UNDERCARRIAGE
- Track pad width 1600 mm (5 ft 3 in) or 1800 mm (5 ft 11 in)
- Cover plate under carbody (belly plate)
- Additional optional equipment available on request.