New 993K Wheel Loader for Sale

993K Wheel Loader

Net Power

973.0 hp
Net Power

973 HP
Operating Weight

294687.0 lb
Operating Weight

294687 lb

Engine

Net Power: 973.0 hp
Net Power: 973 HP

Operating Specifications

Operating Weight: 294687.0 lb
Operating Weight: 294687 lb
Rated Payload: 27.5 tons
Cat Truck Match: 777, 785
Bucket Range: 12.2-23.7 m3 (16.0-31.0 yd3)
Cat Truck Match: 777
Operating Weight: 294687 lb
Operating Weight: 294687 lb
Operating Weight: 294687 lb
Rated Payload: 30 t
Rated Payload: 27.5 t
Articulation Angle: 43.0 Degrees
Articulation Angle: 43 °
Note: * High lift, 60/65-51 BFOR (311-1938), standard cooling, 13.8 m3 (18.0 yd3) bucket (496-9912).

Transmission

Transmission Type: Cat Planetary Power Shift
Transmission Type: Cat Planetary Power Shift
Forward 1: 4.2 mph
Forward: 4.2 mile/h
Forward 2: 7.4 mph
Forward: 7.4 mile/h
Forward 3: 12.7 mph
Forward: 12.7 mile/h
Reverse 1: 4.7 mph
Reverse: 4.7 mile/h
Reverse 2: 8.1 mph
Reverse: 8.1 mile/h
Reverse 3: 13.9 mph
Reverse: 13.9 mile/h
Direct Drive: 8.0 mph
Direct Drive: 4.9 mph
Direct Drive: 8.8 mph
Direct Drive: Lock-up disabled
Direct Drive: 14.1 mile/h
Direct Drive: 15.6 mile/h
Direct Drive: 8 mile/h
Direct Drive: 4.9 mile/h
Direct Drive: 8.8 mile/h
Note: 50/65-51 BFOR (311-1938), calculated speeds.

Hydraulic System - Lift/Tilt

Lift: Positive Flow Control
Lift: Variable Piston
Relief Valve Setting: 4200.0 psi
Lift Cylinder: 10.5 in
Lift Cylinder: 66.2 in
Tilt Cylinder: 9.3 in
Tilt Cylinder: 40.9 in
Maximum Flow at 1: 311 gal/min
Cylinders: Double-acting
Lift Cylinder: 10.5 in
Lift Cylinder: 66.2 in
Lift: Positive Flow Control
Lift: Variable Piston
Relief Valve Setting: 4200 psi
Tilt Cylinder: 9.3 in
Tilt Cylinder: 40.9 in
Note: High Lift configuration.

Hydraulic Cycle Time

Rackback: 2.4 Seconds
Raise: 9.2 Seconds
Dump: 1.8 Seconds
Total Hydraulic Cycle Time: 17.2 Seconds
Lower Float Down: 3.1 Seconds

Hydraulic Cycle Times

Lower: 3.8 s
Dump: 1.8 s
Lower Float Down: 3.1 s
Rack Back: 2.4 s
Raise: 9.2 s
Total Hydraulic Cycle Time: 17.2 s
Note: High Lift configuration, calculated speeds.

Service Refill Capacities

Fuel Tank: 573.3 gal
Fuel Tank: 573.3 gal (US)
Cooling System: 80.2 gal
Cooling System: 80.2 gal (US)
Crankcase: 31.7 gal
Crankcase: 31.7 gal (US)
Transmission: 52.0 gal
Transmission: 52 gal (US)
Differentials and Final Drives: 127.3 gal
Differentials and Final Drives: 127.3 gal
Hydraulic System: 146.0 gal
Hydraulic System: 146 gal (US)
Hydraulic System Factory Fill: 230 gal (US)
Differential: 127.3 gal (US)
Differential: 127.3 gal (US)
Note: High Lift configuration.

Buckets

Bucket Capacities: 12.2-23.7 m3 (16.0-31.0 yd3)
Bucket Capacities: 12.2-23.7 m3 (16.0-31.0 yd3)

Axles

Front: Fixed
Front: Fixed
Rear: Trunnion
Rear: Trunnion
Oscillation Angle: 10 degrees
Oscillation Angle: 10 degrees

Hydraulic System - Steering

Steering System: Closed
Steering System: Piston, variable displacement
Total Steering Angle: 86.0 Degrees
Relief Valve Setting: 5000 psi
Maximum Flow at 1: 133 gal/min
Steering System: Closed
Steering System: Piston, variable displacement
Total Steering Angle: 86 °

Engine - Tier 4 Final

Bore: 5.7 in
Displacement: 1959 in³
Emissions: U.S. EPA Tier 4 Final
Engine Model: Cat® C32 with ACERT™ Technology
Gross Power: 1039 HP
Net Power: 973 HP
Net Power: 1024 HP
Net Power: 973 HP
Net Power: 964 HP
Peak Torque: 4034 lb/ft
Rated Speed: 1800 r/min
Stroke: 6.4 in
Torque Rise: 33%
Note: Standard ambient cooling.

Engine - Tier 2 Equivalent

Bore: 5.7 in
Displacement: 1959 in³
Emissions: U.S. EPA Tier 2 Equivalent
Engine Model: Cat C32 with ACERT Technology
Gross Power: 1041 HP
Net Power: 973 HP
Net Power: 1024 HP
Net Power: 973 HP
Net Power: 964 HP
Peak Torque: 4034 ft-lb
Rated Speed: 1800 r/min
Stroke: 6.4 in
Torque Rise: 33%
Note: Standard ambient cooling.

Sound

Dynamic Operator Sound Pressure Level: 70 dB(A)
Operator Sound Pressure: 72 dB(A)
Note: Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated wi
Note: The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note: The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan s

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
POWER TRAIN
- Brakes, oil-cooled, multi-disc, service/secondary
- Case drain filters
- Demand fan
- Driveline parking brake
- Engine, Cat C32 ACERT
- Fuel priming pump (electric)
- Ground level engine shutoff
- Precleaner, engine air intake (above hood)
- Radiator
- Starting aid, ether, automatic
- Throttle lock, electronic
- Torque converter, Impeller Clutch (ICTC) with Rimpull Control System
- Transmission, planetary powershift, 3F/3R electronic control
ELECTRICAL
- Alarm, back-up
- Alternator, 150-amp
- Batteries, maintenance free, 4 – 1,400 CCA
- Deutsch terminal connectors
- Diagnostic connector starting and charging system
- Electrical system, 24 volt
- Electronic Service Center
- Electronic transmission control
- Lighting system, halogen (front and rear) lighting, access stairway
- Starter and charging system, 24V
- Starter receptacle for emergency start
- Starter and transmission lockouts (bumper)
OPERATOR ENVIRONMENT
- Advisor Display, displays real time operating information, performs calibrations and customizes operator settings
- Air conditioner
- Air precleaner
- Cab, sound suppressed and pressurized, separate external rollover protective structure (ROPS/FOPS) radio ready for entertainment, includes antenna, speakers and converter (12-volt 10-amp) and power port
- Cigar lighter, ashtray
- Coat hook
- Controls, lift and tilt function
- Digital display on center console: – Gear – Ground speed – Machine hours
- Heater, defroster
- Horn, electric
- Instrumentation, gauges: – Coolant temperature – Fuel level – Hydraulic oil temperature – Power train oil temperature – Tachometer
- Light, cab, dome
- Lunchbox, beverage and manual holders
- Mirrors, rearview (externally mounted)
- Rimpull Control System
- Seat, Cat Comfort (cloth), air suspension, six-way adjustable
- Seat, trainer with lap belt, 76 mm (3 in) wide
- Seat belt, retractable, 76 mm (3 in) wide
- STIC Control System
- Transmission gear indicator
- Vital Information Management System (VIMS) with Advisor Display: External Data Port, Customizable Operator Profiles, Cycle Timer, Integrated Payload Control System
- Wet-Arm wipers/washers (front and rear): – Intermittent front and rear wipers
OTHER
- Automatic bucket leveler
- Automatic lift and lower bucket kickout
- Axle ecology drain
- Bumper service center
- Deluxe filtration
- Emergency platform egress
- Front walkway
- Fuel, fast fill system
- Grouped hydraulic pressure ports
- Guards, crankcase and power train
- Hitch, drawbar with pin
- Implement and steering ecology drains
- Implement lock lever, cab
- Linkage pins, maintenance free
- Oil sampling valves
- Positive Flow Control implement system
- Product Link^™
- Rims
- Service center with ground level electrical and fluid connections
- Sight gauges for steering, implement and transmission oil
- Stairway, left and right rear access
- Starter lockout, bumper
- Steering and transmission lock lever, cab
- Steering, load sensing
- Toe kicks
- Transmission lockout, bumper

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
POWER TRAIN
- –50° C (–58° F) antifreeze
- Engine coolant heater (120V)
- Engine coolant heater (240V)
ELECTRICAL
- LED warning strobe
- Object detection (radar)
- Power converter
- Rear vision camera
OPERATOR ENVIRONMENT
- AM/FM/CD/MP3 radio
- Cab precleaner
- Satellite Sirius radio with bluetooth
- Sun screen
MACHINE CONTROL AND GUIDANCE
- Cat Terrain ready
SPARE RIMS
- 40.00×51 spare rim
MISCELLANEOUS ATTACHMENTS
- Axle oscillation limit stop
- Egress, powered rear access
- Rear roading fenders