
Diesel Generator Sets
C18 Generator Set
-
Maximum Rating600 ekW
-
Minimum Rating500 ekW
-
EmissionsLow Fuel Consumption
-
Voltage220 to 380 Volts
Generator Set Specifications
- Maximum Rating
- 600 ekW
- Minimum Rating
- 500 ekW
- Emissions
- Low Fuel Consumption
- Voltage
- 220 to 380 Volts
- Frequency
- 60 Hz
- Speed
- 1800 rpm
- Duty Cycle
- Standby, Prime
Engine Specifications
- Engine Model
- C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
- Bore
- 5.71 in
- Stroke
- 7.2 in
- Displacement
- 1106.4 in³
- Compression Ratio
- 14.5:1
- Aspiration
- Air to Air Aftercooled
- Fuel System
- Electronic unit injection
- Governor Type
- Ademâ„¢A4
- Bore
- 145 mm (5.71 in)
- Displacement
- 18.13 L (1106.36 in3)
- Stroke
- 183 mm (7.2 in)
Generator Set Dimensions
- Length
- 218.5 in
- Width
- 80.9 in
- Height
- 107.8 in
-
Air Inlet
- Air Cleaner
-
Cooling
- Package mounted radiator
-
Exhaust
- Exhaust flange outlet
-
Fuel
- Fuel priming pump
- Secondary fuel filter
- Primary fuel filter with integral water separator
-
Generator
- IP23 Protection
- Matched to the performance and output characteristics of Cat engines
- Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
-
Power Termination
- Bus Bar
-
Control Panel
- EMCP 4.2
-
Mounting
- Rubber vibration isolators
-
Starting/Charging
- 24 volt starting motor
- Batteries
-
General
- Paint - Caterpillar Yellow except rails and radiators gloss black
-
Exhaust
- Industrial, Residential, Critical Mufflers
-
Generator
- Anti-condensation heater
- Oversize and premium generators
- Excitation: [ ] Permanent Magnet Excited (PM) [ ] Internally Excited (IE)
-
Power Termination
- Circuit breakers, UL listed
- Circuit breakers, IEC compliant
-
Control Panels
- Remote monitoring software
- Local & remote annunciator modules
- Digital I/O module
- EMCP 4.4
- Load share module
-
Starting/Charging
- Oversize batteries
- Battery chargers
- Heavy-duty starting system
- Jacket water heater
- Charging alternator
-
General
- Narrow, Wide or Skid Base
- CSA Certification
- UL 2200 package
- EU Certificate of Conformance (CE)
- Enclosures: sound attenuated, weather protective
- Single or dual wall integral fuel tanks
- Integral & sub-base UL listed dual wall fuel tanks
- Automatic transfer switches (ATS)
- Sound attenuated, weather protective or high ambient weather protective enclosure
- The following options are based on regional and product configuration:
- Single or dual wall sub-base fuel tanks
- EEC Declaration of Conformity
- Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007