Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Industrial

Cat® C32

  • Minimum Power
    950.0 bhp
  • Maximum Power
    1350 HP
  • Maximum Power
    1350.0 bhp
  • Maximum Torque
    4548 lb-ft @ 1400 rpm
Power Rating
Minimum Power
950.0 bhp
Maximum Power
1350 HP
Maximum Power
1350.0 bhp
Maximum Torque
4548 lb-ft @ 1400 rpm
Rated Speed
1800-2100 rpm
Minimum Power
950 HP
Rated Speed
1800-2100 rpm
Emission Standards
Emissions
U.S. EPA Tier 2 Equivalent
Emissions
U.S. EPA Tier 2 Equivalent
General
Engine Configuration
V-12, 4-Stroke-Cycle Diesel
Engine Configuration
V-12, 4-Stroke-Cycle Diesel
Bore
145 mm (5.71 in)
Bore
145 mm (5.71 in)
Bore
5.7 in
Stroke
6.4 in
Stroke
162 mm (6.38 in)
Stroke
162 mm (6.38 in)
Displacement
1958.9 in³
Displacement
32.1 L (1958.9 in³)
Aspiration
Turbocharged Aftercooled (TA)
Displacement
32.1 L (1958.9 in³)
Compression Ratio
16.5:1
Compression Ratio
16.5:1
Aspiration
Turbocharged Aftercooled (TA)
Combustion System
Direct Injection
Combustion System
Direct Injection
Rotation
Counterclockwise
Rotation from Flywheel End
Counterclockwise
Aftertreatment
-
Engine Dimensions - Approximate
Length
75.5 in
Width
58.2 in
Height
51.9 in
Weight
6495 lb
Height
1319 mm (51.9 in)
Length
1917 mm (75.5 in)
Weight
2946 kg (6495 lb)
Width
1479 mm (58.2 in)
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
Length
1917 mm (75.5 in)
Width
1479 mm (58.2 in)
Height
1319 mm (51.9 in)
Weight
2946 kg (6495 lb)
  • Air Inlet System
    • Twin Turbocharged Aftercooled
    • Air-to-Air Aftercooled
  • Control System
    • Electronic governing, PTO speed control
    • Programmable ratings
    • Automatic altitude compensation
    • Power compensation for fuel temperature
    • Programmable low and high idle and total engine limit
    • Electronic diagnostics and fault logging
    • Engine monitoring system SAE J1939 broadcast and control
    • ADEM A4 Electronic Control Unit (ECU)
  • Cooling System
    • Thermostats and housing, vertical outlet
    • Jacket water pump, centrifugal
    • Water pump, inlet
  • Exhaust System
    • Exhaust manifold, dry
    • Optional exhaust outlet
  • Flywheels and Flywheel Housing
    • SAE No. 1 flywheel housing
  • Fuel System
    • MEUI injection
    • Fuel filter, secondary (2 micron)
    • ACERT Technology
    • Fuel transfer pump
    • Fuel priming pump
  • Lube System
    • Crankcase breather
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Front sump oil pan
    • Oil dipstick
    • Gear driven oil pump
  • General
    • Vibration damper
    • Lifting eyes
    • Cold start capability to -20° C (-4° F)
    • Paint: Caterpillar yellow, with optional colors available at request