New 730 Articulated Truck for Sale

730 Articulated Truck

Engine Model

Cat® C13
Bore

5.1 in
Stroke

6.2 in
Displacement

762.8 in³

Engine

Engine Model: Cat® C13
Bore: 5.1 in
Stroke: 6.2 in
Displacement: 762.8 in³
Net Power: 370 HP
Gross Power: 375 HP
No Engine De: 12500 ft
Peak Engine Torque Speed: 1200 r/min
Peak Engine Torque Net: 1564 ft·lbf
Net Power: 367 HP
Engine Model: Cat C13
Peak Engine Torque Gross: 1579 ft·lbf
Note: The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Emissions: The 730 meets Tier 4 Final and Stage V emission standards.
Note: The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
Note: The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.
Note: Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
Note: DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio

Weights

Rated Payload: 31 ton (US)

Body Capacities

Heaped: 23 yd³
Struck: 17.4 yd³
Tailgate Heaped SAE 2: 24.6 yd³
Tailgate Struck: 18.2 yd³

Transmission

Forward: 5 mile/h
Forward: 9 mile/h
Forward: 14 mile/h
Forward: 21 mile/h
Forward: 29 mile/h
Forward: 34 mile/h
Reverse: 6 mile/h

Sound Levels

Interior Cab: 72 dB(A)
Note: The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the
Note: Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Operating Weights

Front Axle: 33069 lb
Front Axle: 40300 lb
Center Axle: 27249 lb
Rear Axle: 36817 lb
Center Axle: 37302 lb
Total: 61729 lb
Front Axle: 7231 lb
Total: 114420 lb
Center Axle: 10053 lb
Rear Axle: 9568 lb
Total: 52690 lb
Rear Axle: 27249 lb

Service Refill Capacities

Fuel Tank: 108.8 gal (US)
Cooling System: 21.9 gal (US)
Hydraulic System: 29.1 gal (US)
Engine Crankcase: 10 gal (US)
Transmission: 12.4 gal (US)
Final Drives: 33 gal (US)
Output Transfer Gear Box: 6.3 gal (US)
DEF Tank: 5.3 gal (US)

Body Hoist

Raise Time: 12 s
Lower Time: 8 s

Steering

Lock to Lock: 4.75 seconds @ 60 rpm

Standards

Brakes: ISO 3450 – 2011
Cab: ISO 3449 Level II – 2005
Cab: ISO 3471 – 2008
Steering: ISO 5010 – 2007

Body Plate

Type: High strength Brinell HB450 wear resistant steel

Turning Circle

Turning Dimensions: 210 in
Turning Dimensions: 45°
Turning Dimensions: 153 in
Turning Dimensions: 294 in
Note: Dimensions are for machines equipped with 23.5R25 tires.
Turning Dimensions: 318 in

Body Plate Thickness

Base Plate: 0.51 in
Side Plates: 0.43 in
Front Plate: 0.28 in

Optimal Loader/Truck Pass Matching

Wheel Loaders: 4
Wheel Loader: 4–5
Wheel Loader: 5
Hydraulic Excavators: 5–6
Hydraulic Excavators: 4–5
Note: An optimum system match gives you a major productivity advantage. The 730 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased
Wheel Loaders: 3–4

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
- Tilt and telescopic steering wheel
- Machine operation monitoring system includes:
  – Action lamp
  – Engine oil pressure
  – Primary steering system
  – Left and right turn signal
  – High beam
  – Coolant temperature
  – Tachometer
  – Parking brake
  – Fuel level
  – Transmission oil temperature
  – Brake system
  – Transmission hold
  – Hoist control
  – Hydraulic system
  – Charging system
  – Retarder
  – Transmission fault
  – Traction control system
  – Check engine lamp
- Combined gear selection and hoist control lever
- Glass windows:
  – Front, laminated and tinted
  – Sides and rear, toughened and tinted
- Secondary steering – electro hydraulic
- Heater and defroster with four-speed fan
- Retractable belt: Operator seat and second seat
- Windshield wiper and washer, two speed, intermittent (front)
- Mirrors: extensive arrangement for improved visibility
- Windshield wiper and washer, two speed (rear)
- Seats:
  – Operator: fully adjustable, air suspension
  – Trainer: padded with lap belt
- Adjustable air vents
- Windows opening both sides, tinted
- Liquid Crystal Display (LCD):
  – Alert indicator
  – Selected gear and direction
  – Speed or auto shift
  – Review Operation and Maintenance Manual (OMM)
  – Primary steering failure warning
  – Seat belt warning
  – Secondary steering failure warning
  – Diesel Particulate Filter (DPF) regeneration filter
  – Machine Security System (MSS) ready
  – Secondary steering energy source engaged
  – Hour meter
  – Retarder active
- Sun visor
- Touchscreen display incorporating the rearview camera video feed
- Storage:
  – Cup holder
  – Flask receptacle
  – Under seat storage
  – Door pocket
  – Behind operator seat storage
  – Coat hook
- Air conditioning with R134A refrigerant
CAT TECHNOLOGIES
- Cat Detect with Stability Assist
- Product Link
ELECTRICAL AND LIGHTING
- Electrical system: 24-volt, 10A 24- to 12-volt converter
- Main disconnect switch
- Batteries (two) maintenance free
- Remote starting receptacle (cables not included)
- Horn
- Lighting systems:
  – Cab interior
  – Two head lamps
  – Two width marker
  – Two reversing
  – Work light/cab access light
  – Two stop/tail lights
  – Front and rear direction indicators
POWER TRAIN
- Differentials: standard with automatic clutched inter- and cross-axle differential locks
- Auto shift six-speed forward and one reverse transmission
- Dual circuit oil immersed, enclosed brakes – all wheels
- Retarder: engine compression brake
- Cat C13 engine
- Three axle, six-wheel drive
- Cat Clean Emission Module (CEM) and exhaust aftertreatment package
SAFETY
- Rearview camera
- ROPS/FOPS cab
- Reverse alarm
GUARDS
- Radiator
- Rear window
- Axle
- Front dump body spill guard, integral part of fabricated body
- Crankcase
OTHER STANDARD EQUIPMENT
- Sound suppression (only standard in Europe)
- Tires, six 23.5R25, radial
- Vandalism protection: lockable caps
- Mud flaps: wheel arch and body mounted with transportation tiebacks
- S·O·S sampling valves

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
OPTIONAL EQUIPMENT
- Window blinds
- Auto lube installation for automatic greasing of bearings
- Ether start
- Cold weather start attachment
- Four-point seat belt
- Machine Security System (MSS)
- Bare chassis (no body) standard wheel base
- Fuel additive – anti-waxing
- Sound suppression (only standard in Europe)
- Cold weather coolant –51° C (–60° F)
- Wheel chocks
- Flashing LED beacon
- Engine block heater
- Bluetooth radio stereo system
- Exhaust heated body
- Product Link Elite: PLE631 (satellite), PLE641 (cellular). Product Link is optional.
- Heated rearview motorized mirrors
- Body liners
- Bare chassis (no body) long wheel base
- Infrared glass – high ambient cab
- Heated/cooled seat
- Roof mounted High Intensity Discharge (HID) work lights
- Cat Production Measurement payload monitoring system
- Fast fuel fill
- Tires, six 750/65R25, radial
- Scissor tailgate