New 815 Soil Compactor for Sale

815 Soil Compactor

Engine Model

Cat® C7.1: configured for two emissions options
Net Power

249 HP
Net Power

249 HP
Emissions

Meets U.S. EPA Tier 4 Final/EU Stage V emission standards

Engine - Tier 4 Final/EU Stage V

Engine Model: Cat® C7.1: configured for two emissions options
Net Power: 249 HP
Net Power: 249 HP
Emissions: Meets U.S. EPA Tier 4 Final/EU Stage V emission standards
Rated Speed: 2200 r/min
Gross Power: 284 HP
Engine Power: 275 HP
Peak Torque: 902 lb-ft @ 1400 rpm
Torque Rise: 52%
Bore: 4.1 in
Stroke: 5.3 in
Displacement: 427.8 in³
High Idle Speed: 2270 r/min
Low Idle Speed: 800 r/min
Maximum Altitude without Derating: 9842.5 ft
Note: Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.

Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA

Engine Model: Cat® C7.1: configured for two emissions options
Net Power: 249 HP
Emissions: Brazil MAR-1 and China Nonroad Stage III, equivalent to U.S. EPA Tier 3/EU Stage IIIA
Rated Speed: 2200 r/min
Gross Power: 286 HP
Engine Power: 275 HP
Peak Torque: 749 lb-ft @ 1400 rpm
Torque Rise: 26%
Bore: 4.1 in³
Stroke: 5.3 in
Displacement: 5.3 in
High Idle Speed: 2270 r/min
Low Idle Speed: 800 r/min
Maximum Altitude without Derating: 9842.5 ft
Note: Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.

Operating Specifications - Tier 4 Final/EU Stage V

Operating Weight: 49652 lb

Transmission

Transmission Type: Cat Planetary Power Shift
Travel Speeds: 3.9 mile/h
Travel Speeds: 7.7 mile/h
Travel Speeds: 11.3 mile/h
Travel Speeds: 4.5 mile/h
Travel Speeds: 8.5 mile/h
Travel Speeds: 11.4 mile/h

Hydraulic System - Lift/Tilt

Lift: Pilot operated LS valve with EH
Lift: Variable displacement piston
Maximum Flow at 2: 23.5 gal/min
Relief Valve Setting: 3190 psi
Pilot System: Open center, fixed displacement gear
Pilot Relief Valve Setting: 3046 psi

Hydraulic System - Steering

Steering System: Pilot, Load Sensing
Steering System: Piston – Variable Displacement
Maximum Flow at 2: 38.8 gal/min
Relief Valve Setting: 4003 psi
Total Steering Angle: 84
Steering Cycle Times: 3 s
Steering Cycle Times: 8.2 s
Steering Pressure Limited: 4003 psi
Vehicle Articulation Angle: 84 degrees
Maximum System Flow: 147 L/min @ 2,111 rpm (38.8 gal/min @ 2,111 rpm)

Service Refill Capacities

Fuel Tank: 132.1 gal (US)
Diesel Exhaust Fluid Tank: 4.2 gal (US)
Cooling Systems: 21.4 gal (US)
Cooling System: 19.3 gal (US)
Engine Crankcase: 5.3 gal (US)
Transmission: 14.8 gal (US)
Differential: 17.2 gal (US)
Differential: 17.2 gal (US)
Hydraulic Tank Only: 19.8 gal (US)
Note: All non-road Tier 4 Final and Stage V diesel engines are required to use: – Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm for EPA and 10 ppm for EU (mg/kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm for E
Diesel Exhaust Fluid Tank: 4.2 gal (US)

Dimensions (Approximate)

Height: 12.9 ft
Height: 12 ft
Height: 11.1 ft
Height: 8.6 ft
Height to Top of Radiator Guard: 7.9 ft
Ground Clearance to Hitch: 1.2 ft
Ground Clearance to Transmission Guard: 1.2 ft
Ground Clearance to Bottom of Bumper: 2.2 ft
Centerline of Rear Axle to Bumper: 6.5 ft
Hitch to Centerline of Front Axle: 5.5 ft
Wheel Base: 11 ft
Width over Platform: 10.3 ft
Height to Top of GPS Antenna: 12.1 ft
Overall Machine Length with Straight Blade: 23.5 ft
Overall Machine Length with EU Suppression: 24.9 ft
Centerline of Rear Axle to Bumper: 6.53 ft
Turning Radius: 8.27 ft
Ground Clearance: 2.18 ft
Ground Clearance: 1.23 ft
Width: 10.64 ft
Length: 23.48 ft

Axles

Front: Planetary – Fixed
Rear: Planetary – Oscillating
Oscillation Angle: ±10

Braking System

Service Brakes: Single Disc Wet (Enclosed) 2 WHL
Parking Brake: Drum and Shoe, Spring Applied, Hydraulic Released

Sound Performance - Tier 4 Final/EU Stage V - Standard

Operator Sound Level: 70 dB(A)
Machine Sound Level: 111 dB(A)
Note: The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
Note: The operator sound pressure level uncertainty is ± 2 dB(A)
Note: Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note: The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.

Sound Performance - Tier 4 Final/EU Stage V - Suppression

Machine Sound Level: 70 dB(A)
Operator Sound Level: 70 dB(A)
Machine Sound Level: 109 dB(A)
Note: The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
Note: The operator sound pressure level uncertainty is ± 2 dB(A)
Note: Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note: The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.

Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard

Operator Sound Level: 70 dB(A)
Machine Sound Level: 112 dB(A)
Note: The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
Note: The operator sound pressure level uncertainty is ± 2 dB(A)
Note: Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note: The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.

Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression

Operator Sound Level: 70 dB(A)
Machine Sound Level: 110 dB(A)
Note: The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
Note: The operator sound pressure level uncertainty is ± 2 dB(A)
Note: Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note: The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.

Sound Performance - Tier 4 Final/EU Stage V - Suppression EU

Machine Sound Level: 107 dB(A)
Note: The machine sound power level was measured according to the test procedures and conditions specified in ISO 6393:2008. The measurement was conducted at the rated engine cooling fan speed.

Wheels

Weight: 9720 lb
Outside Diameter: 55.6 in
Drum Diameter: 40.5 in
Drum Width: 39 in
Tips per Row: 12
Tips per Wheel: 60
Replaceable: Weld On
Width: 127.7 in
Width Between Drums: 49.6 in
Tip Height: 7.5 in

Blades

Capacity: 2.69 yd³
Overall Width: 12.3 ft
Height: 2.8 ft
Digging Depth: 0.7 ft
Ground Clearance: 2.6 ft
Maximum Tilt: 1.1 ft
Turning Radius: 21.1 ft
Turning Radius: 8.3 ft
Weight: 1764 lb
Total Operating Weight: 49652 lb
Maximum Depth of Cut: 0.73 ft
Maximum Lift Above Ground: 2.63 ft
Total Tilt Adjustment: 2.14 ft
Width: 12.34 ft
Blade Tilt Angle: 5,5°
Height: 2.82 ft
Width: 11.98 ft
Blade Tilt Adjustment: 1 ft
Blade Tilt Adjustment: 1.14 ft
Blade Tilt Angle: 4,8°

Engine

Low Idle Speed: 800 r/min
Maximum Altitude: 9842.5 ft
High Idle Speed: 2270 r/min

Hydraulic System

Tilt Cylinder: 101.6 mm × 167 mm (4 in × 6.6 in)
Lift Cylinder: 101.6 mm × 627 mm (4 in × 24.7 in)
Pump Flow at 2: 23.5 gal/min
Maximum Supply Pressure: 2930 psi
Main Relief Pressure: 3190 psi

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
POWER TRAIN
- Advanced Productivity Electronic Control System (APECS)
- Air to air aftercooler
- Brakes, full hydraulic, enclosed, wet multiple disc service brakes
- Cat clean emission module (Tier 4 Final/Stage IV only)
- Electro-hydraulic parking brake
- Electronic Clutch Pressure Control (ECPC)
- Engine, Cat C7.1 (configured for two emissions options): – Tier 4 Final/Stage V – Tier 3/Stage IIIA equivalent
- Engine driven cooling fan – suction
- Fuel priming pump (electric)
- Fuel to air cooler
- Ground level engine shutoff
- Muffler (under hood) (Tier 3/Stage IIIA equivalent only)
- Radiator, unit core
- Starting aid (ether)
- Throttle lock
- Torque converter
- Transmission, planetary, with 3F/3R speed range control
ELECTRICAL
- Alarm, back-up
- Alternator, 150 amp
- Batteries, maintenance-free
- Electrical system, 24V
- Ground level lockable master disconnect switch
- Lights, directional (rear)
- Light, warning switched (LED strobe)
- Lighting system, (front and rear)
- Starter, electric
- Starting receptacle for emergency start
OPERATOR ENVIRONMENT
- 12V power port for mobile phone or laptop connection
- AccuGrade^™ mapping (ready)
- Air conditioner
- Cab, sound-suppressed pressurized
- Cab door, sliding window (LH)
- Cat Compaction Control (ready)
- Cat Detect: Object Detection (ready)
- Coat and hard hat hooks
- Finger tip shifting controls
- Flip-up armrest
- Heater and defroster
- Horn, electric
- Hydraulic controls – seat mounted
- Implement hydraulic lockout
- Instrumentation, gauges: – DEF fluid level (Tier 4 Final/Stage V only) – Engine coolant temperature – Fuel level – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature
- Instrumentation, warning indicators: – Action alert system, three categories – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp – Parking brake status
- Light, (dome) cab
- Lunch box and beverage holders
- Mirror, internal (panoramic)
- Mirrors, rearview (externally mounted)
- Radio ready for entertainment: – Antenna – Speakers – Converter (12V, 10-15 amp)
- Seat, Cat Premium Plus (leather)
- Seat belt with minder, retractable, 76 mm (3 in) wide
- STIC control system with lockout
- Sun visor, front
- Tinted glass
- Transmission gear (indicator)
- Vital Information Management System (VIMS): – Graphical information display – External data port – Customizable operator profiles – Event indicator light on rear grill
- Wet-arm wipers/washers (front and rear): – Intermittent wipers (front and rear)
TIRES, RIMS AND WHEELS
- Wheels, tamping foot
GUARDS
- Cleaner bars with teeth
- Guards, crankcase and power train
- Guard, driveshaft
FLUIDS
- Antifreeze, premixed 50% concentration extended life (–34° C/–29° F)
OTHER STANDARD EQUIPMENT
- DEF tank fill gauge
- Doors, service access (locking)
- Ecology drains for engine, radiator, transmission, hydraulic tank
- Engine, crankcase, 500 hour interval with CJ-4 oil
- Emergency platform egress
- Fire suppression ready
- Fuel tank, 500 L (132.1 gal)
- Hitch, drawbar with pin
- Hoses, Cat XT^™
- Hydraulic, engine, and transmission oil coolers
- Oil change system, high speed
- Oil sampling valves
- Steering, load sensing
- Total hydraulic filtration system
- Vandalism protection caplocks
- Venturi stack
STANDARD ATTACHMENTS – HYDRAULICS
- Hydraulics: – Standard or EU and Canada
STANDARD ATTACHMENTS – OPERATOR ENVIRONMENT
- Glass (window): – rubber-mounted glass
- Precleaner (cab): – powered
- Seat (cab): – heated and ventilated
- Mirrors – cab: – Standard or heated
STANDARD ATTACHMENTS – POWER TRAIN
- Axles: – Standard or non-spin rear
STANDARD ATTACHMENTS – SPECIAL ARRANGEMENTS
- Engine Precleaners: – Turbine or dual stage
STANDARD ATTACHMENTS – ELECTRICAL
- Lights: – Standard or LED
STANDARD ATTACHMENTS – FUEL SYSTEMS
- Fuel tank: – Non-fast or fast fill
STANDARD ATTACHMENTS – TECHNOLOGY PRODUCTS
- Product Link: – GSM, satellite
STANDARD ATTACHMENTS – CLEANER BARS
- Cleaner bars: – Standard or abrasive
STANDARD ATTACHMENTS – BLADES
- Blades: – Straight or tilt-straight

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
- Camera, rear vision
- Radio, AM/FM/AUX/USB/BLUETOOTH
- Radio, CB (ready)
TECHNOLOGY PRODUCTS
- Compaction control, basic
OTHER ATTACHMENTS
- Sound suppression (required for Brazil)
FLUIDS
- Antifreeze, –50° C (–58° F)
STARTING AIDS
- Heater, engine coolant, 120V
- Heater, engine coolant, 240V
MISCELLANEOUS
- Film (ANSI) (Tier 4 Final/Stage V only)
- EU certification (Tier 4 Final/Stage V only)
- Plate – year of manufacture (Tier 3/Stage IIIA equivalent only)