New D1 Dozer for Sale

D1 Dozer

Engine Model

Cat C3.6
Power

80 HP
Displacement

220 in³
Net Power

80 HP

Engine

Engine Model: Cat C3.6
Power: 80 HP
Displacement: 220 in³
Net Power: 80 HP
Net Power: 80 HP
Note: Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the ﬂywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Note: All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.

Engine

Power Train: Hydrostatic

Weights

Operating Weight: 17855 lb

Weights

Operating Weight: 18839 lb
Note: Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Operating Weight: 19295 lb
Note: For machine with ripper, add 554 kg (1,222 lb).

Cab

FOPS: ISO 3449:2005 Level II
ROPS: ISO 3471:2008

Transmission

Drive Pumps: 1
Maximum Travel Speed: 6.2 mile/h
Relief Valve Settings: 7033 psi
Maximum Travel Speed: 5.6 mile/h
Track Motors: 2

Undercarriage

Length: 89 in
Length: 89 in
Track Gauge: 68 in
Shoe Width: 30 in
Track Gauge: 73 in
Shoe Width: 25 in
Track Gauge: 59 in
Shoe Width: 16 in
Ground Pressure: 4.3 psi
Ground Pressure: 3.7 psi
Number of Shoes: 43
Number of Rollers: 6

Undercarriage

Length of Track on Ground: 89 in
Number of Shoes: 38
Ground Pressure: 6.45 psi

Service Refill Capacities

Final Drive: 2.6 gal (US)
Cooling System: 4.2 gal (US)
Diesel Exhaust Fluid: 4.9 gal (US)
Transmission: 23.8 gal (US)
Crankcase: 2.8 gal (US)
Fuel Tank: 51.5 gal (US)

Service Refill Capacities

Final Drives: 2.6 gal (US)

Hydraulic Controls

Pump Output: 17.2 gal/min
Relief Valve Settings: 2988 psi

Ripper

Type: Parallelogram
Number of Shanks: 3
Height: 6.5 in
Weight: 1222 lb
Maximum Ground Clearance Under Tip: 17.6 in
Maximum Digging Depth: 13.3 in
Overall Width: 67.3 in
Maximum Reach: 30.2 in

Winch

Weight: 1345 lb
Winch Drive: Hydrostatic
Control: Hydraulic
Speed: Variable
Drum Capacity: 256 ft
Maximum Line Speed: 207 ft/min
Rope Diameter: 0.75 in
Maximum Line Pull: 25000 lb
Maximum Line Speed: 131 ft/min
Rope Diameter: 0.63 in
Drum Width: 10.8 in
Drum Capacity: 371 ft
Maximum Line Pull: 40000 lb
Drum Diameter: 10 in
Winch Length: 27.76 in
Throat Clearance: 6.75 in
Overall Width: 29.2 in

Air Conditioning System

Air Conditioning: The air conditioning system on this machine contains the ﬂuorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

Dimensions

BLADE: 22.5 in
Width: 94.9 in
BLADE: 2.17 yd³
BLADE: 28.7 in
Length: 129.6 in
BLADE: 17.2 in
BLADE: 124 in
Ground Clearance: 13 in
BLADE: 113.1 in
BLADE: 23 in
BLADE: 29.3 in
Track Gauge: 67.9 in
Ground Clearance: 13 in
Width: 92.9 in
BLADE: 33.8 in
Overall Length: 167.8 in
Track Gauge: 73 in
BLADE: 33.9 in
BLADE: 52° to 58°
Tractor Height: 108.9 in
BLADE: 25°
BLADE: 1.96 yd³
Length: 129.6 in
BLADE: 52° to 58°
BLADE: 105.1 in
BLADE: 17.7 in
BLADE: 115 in
BLADE: 25°
Tractor Height: 108.9 in
Overall Length: 167.8 in
Note: *Abrasion Undercarriage
Length of Basic Dozer: 129.6 in
Width of Dozer: 74.8 in
Length of Basic Dozer: 129.6 in
Length of Basic Dozer: 129.6 in
Width of Dozer: 94.9 in
Dozer Height: 108.9 in
Width of Dozer: 92.9 in
Dozer Height: 108.9 in
Dozer Height: 108.9 in

Dimensions

BLADE: 95.2 in
BLADE: 23.2 in
BLADE: 104.2 in
BLADE: 28.7 in
Ground Clearance: 13 in
BLADE: 52° to 58°
Tractor Height: 108.9 in
Length: 129.6 in
BLADE: 25°
BLADE: 14.5 in
BLADE: 1.99 yd³
Track Gauge: 58.9 in
BLADE: 35.8 in
Width: 74.8 in
Overall Length: 168 in
Note: With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)

Retrieval Winch

Weight: 1747 lb
Maximum Line Pull: 79 ft/min
Drum Capacity: 277 ft
Maximum Line Pull: 50 ft/min
Drum Capacity: 195 ft
Maximum Line Speed: 20350 lb
Control: Hydraulic
Maximum Line Speed: 32150 lb
Rope Diameter: 0.75 in
Winch Drive: Hydraulic
Rope Diameter: 0.63 in
Speed: Variable
Drum Diameter: 8 in
Drum Width: 9.65 in
Throat Clearance: 5.6 in
Winch Length: 35.63 in
Overall width: 27.91 in

High Performance Winch

Weight: 1345 lb
Drum diameter: 10 in
Winch drive: Hydrostatic
Winch length: 27.76 in
Maximum line pull: 40000 lb
Maximum line speed: 207 ft/min
Drum width: 10.8 in
Drum capacity: 256 ft
Rope diameter: 0.63 in
Maximum line pull: 25000 lb
Rope diameter: 0.75 in
Speed: Variable
Maximum line speed: 131 ft/min
Throat clearance: 6.75 in
Drum capacity: 371 ft
Overall width: 29.2 in
Control: Hydraulic

POWER TRAIN
- Air cleaner with precleaner, automatic dust ejection and underhood intake
- Aluminum bar plate cooling system (radiator, power train)
- Automatic traction control
- Cat^® C3.6 diesel engine
- Drive, auxiliary
- Dual path, closed loop, hydrostatic transmission
- Electric fuel pump
- Fuel/water separator
- Turbocharged aftercooled
ELECTRICAL
- Alarm, backup
- Alternator, 150 amp, heavy duty
- Batteries, heavy duty, maintenance free, 1,000 CCA
- Diagnostic connector
- Four integrated front halogen lights, two rear halogen
- Horn, electric
- Starter, electric, 12 V, heavy duty
UNDERCARRIAGE
- SALT undercarriage (43 section)
- Carrier rollers
- Guards, front/rear guiding
- Six roller track frame
- Track adjusters, hydraulic
- Track rollers, lifetime lubricated
HYDRAULIC
- Hydraulic pump and oil
- Single lever, three function control
- Three valve hydraulics
CAT TECHNOLOGY
- Low Slip Traction Control (included with ARO and Cat Grade 3D)
- Slope Indicate
- Stable Blade Lift and Tilt (included with ARO and Cat Grade 3D)
- Compatibility with radios and base stations from Trimble, Topcon, and Leica
- Capability to install 3D grade systems from Trimble, Topcon, and Leica
ATTACHMENTS
- Rigid drawbar
- Front pull device
OPERATOR ENVIRONMENT
- Armrests, adjustable
- Coat hook
- Controls, seat mounted, fore/aft adjustment
- Cup holders
- Eco Mode
- Electronic Monitoring system with gauge:
  – Chassis slope indication
  – Diesel exhaust fluid (DEF)
  – Engine coolant temperature
  – Fuel level
  – Hydraulic oil temperature
- Electronic security system
- Engine air cleaner service indicator
- Engine RPM and gear display
- Floor mat, rubber, heavy duty
- Foot pads, dash
- Hour meter, electronic
- Independent forward/reverse speed settings
- Mirror, rearview, inside
- Power port, 12 volt
- ROPS/FOPS canopy
- Seat, air suspended, cloth or vinyl
- Seatbelt, hi-vis retractable 76 mm (3")
- Seatbelt buckling indicator/reminder
- Single pedal combining decel and brake functions
- Speed recall
- Storage compartment
- Throttle switch, rotary
- Travel speed limiter, electronic

POWER TRAIN
- Air cleaner with external precleaner
- Installation, winch
ELECTRICAL
- Four integrated front LED lights, two rear LED
UNDERCARRIAGE
- Abrasion undercarriage (38 section)
- Track Pairs:
  – Track, 406 mm (16 in)
  – Track, 635 mm (25 in)
  – Track, 762 mm (30 in)
HYDRAULIC
- Four valve for use with ripper
- Four valve for use with winch
CAT TECHNOLOGY
- Cat Grade with Slope Assist
- Cat Grade with 3D
- Blade Load Monitor (included with Cat Grade 3D)
- AutoCarry (included with Cat Grade 3D)
- Cat Product Link^™ PLE643/PLE743 Cellular
- Cat Product Link PLE683/PLE783 Cellular/Satellite
- Full-color 10 in (254 mm) touchscreen grade display
- Cat Command Console
- Cat Command Station
ATTACHMENTS
- Drawbar, towing
- Machine security system
- Mounting, winch
- Ripper, parallelogram, includes three
- shanks and teeth
- Winch, hydraulic, high performance
- Winch, hydraulic, retrieval
OPERATOR ENVIRONMENT
- Power Pitch
- Cab, with air conditioning
- Cab, polycarbonate windows and air conditioning
- Radio, AM/FM Bluetooth^®
- Seat, air suspension, choice of:
  – Vinyl, heated seat with heated controls
  – Cloth, heated seat with heated controls
  – Cloth, heated and ventilated seat with heated controls
- Sound suppression
OTHER
- Heater, engine, coolant 120 V/240 V
- Starting aid, ether