New 7295 Electric Rope Shovel for Sale

7295 Electric Rope Shovel

Dimensions

Weights

Working Weight: 1748837 lb
General purpose dipper: 110000.0 lb
Note: These weights will vary slightly depending upon dipper and optional equipment selection.
Note: All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.
Ballast: 352000 lb
Note: These weights will vary slightly depending upon dipper and optional equipment selection.
Note: All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.

Main Structures

Crawler Mounting: 20.81 m2 (224 ft2); 371.6 kPa (53.9 psi)
Crawler Mounting: 27.2 m2 (293 ft2); 284.1 kPa (41.2 psi)
Hoist: Hoist machinery consists of a motor coupled to two gear reductions, which drive the 137 cm (54 in) hoist drum.
Planetary Propel: Dual-motor independent drive.
Revolving Frame: 22.7 ft
Revolving Frame: 10.5 ft
Swing: Two parallel shaft units mounted to either side of the revolving frame. Each unit is driven by a vertically mounted motor.
Turntable: 14.34 ft
Turntable: 54
Turntable: 7.38 in
Turntable: 12.86 ft
Turntable: 8.0 in
Upper Works Overall Width: 41.33 in
Crawler Dimensions: 28.22 in
Ground Bearing Pressure: 315.6 ft²
Ground Bearing Pressure: 39 in
Ground Bearing Pressure: Ground bearing pressure is dependent upon many factors.
Planetary Propel: Dual-motor independent drive.
Swing: Parallel shaft gear cases, driven by a vertically mounted motor, are located on either side of the revolving frame.
Hoist: A motor coupled to two gear reductions drives a 137 cm (54 in) hoist drum.

Optimal Working Ranges

Optimal Working Ranges*

Dumping Height: 27.56 ft
Cutting Height: 45 ft
Cutting Radius: 67.59 ft
Radius of Level Floor: 48.88 ft
Revolving Frame Tail Swing Radius: 25.59 in
Note: Optimal working ranges based on loading a Cat® 785D truck.
Note: *All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.

Lube System

Type: Automatic, single-line system for open gear lubricant and grease.
Components: 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
Components: External fast fill from lower level.

Electrical

Power Requirements: 538-753 kW
Power Requirements: 2152 kW
Power Requirements: 3 phase, 50/60 Hz, 7,200V (Other voltages available to suit customer requirements.)
Drive: IGBT Acutrol drive system.
Power Requirements: 3 phase, 50/60 Hz, 7,200V
Power Requirements: 6,000V, 6,600V, 7,200V
Power Requirements: 4,160V, 7,200V
Power Requirements: 538-753 kW (721-1,010 hp)
Power Requirements: 2886 hp
Note: Other voltages available to suit customer requirements.

Front End

Rope Data: 7 x 25
Rope Data: 0.63 in
Rope Data: 1
Rope Data: single
Rope Data: 6 x 41
Rope Data: 2.25 in
Rope Data: 2
Rope Data: twin dual
Rope Data: 8 x 37
Rope Data: 2.38 in
Rope Data: 1
Rope Data: single dual
Components: One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
Standard Rope Data: 2
Standard Rope Data: 2.375 in
Standard Rope Data: 1
Standard Rope Data: 2.25 in
Standard Rope Data: 1
Standard Rope Data: 2.25 in
Standard Rope Data: 4
Standard Rope Data: 2.75 in
Standard Rope Data: 1
Standard Rope Data: 0.625 in
Crowd: Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Note: High impact ropes available as an option

Lights

Types: Incandescent lights on ground lights, walkways and operator’s cab.
Types: HPS lights on boom feet, top of A-frame, machinery house, lube room, control room, utility room and flood lights.

Crowd

Components: Rope Crowd with crowd machinery located at front center of the revolving frame; consisting of a motor, brake, drum and gearing.
Components: Plastic-coated crowd and retract ropes are used to move the dipper handle fore and aft.