Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Large Wheel Loaders

988H Wheel Loader

  • Net Power
    481 HP
  • Engine Model
    C18 ACERT
  • Gross Power
    530 HP
  • Net Power
    481 HP
Engine
Net Power
481 HP
Engine Model
C18 ACERT
Gross Power
530 HP
Net Power
481 HP
Gross Power
520 HP
Bore
5.7 in
Stroke
7.2 in
Displacement
1104.5 in³
Net Power
481 HP
Operating Specifications
Operating Weight
109249 lb
Rated Payload
12.5 Sh Ton
Rated Payload
12.5 Sh Ton
Transmission
Converter Drive
4.2 mile/h
Converter Drive
7.3 mile/h
Converter Drive
12.9 mile/h
Converter Drive
22.3 mile/h
Converter Drive
4.7 mile/h
Converter Drive
8.4 mile/h
Converter Drive
14.7 mile/h
Direct Drive
Lock-up disabled
Direct Drive
7.7 mile/h
Direct Drive
13.6 mile/h
Direct Drive
24 mile/h
Direct Drive
4.9 mile/h
Direct Drive
8.8 mile/h
Direct Drive
15.6 mile/h
Hydraulic Cycle Times
Raise
9.4 s
Dump
2.4 s
Lower Float Down
3.8 s
Total Hydraulic Cycle Time
15.6 s
Service Refill Capacities
Fuel Tank
188 gal (US)
Cooling System
27.2 gal (US)
Crankcase
15.9 gal (US)
Transmission
18.5 gal (US)
Differential
49 gal (US)
Differential
49 gal (US)
Hydraulic System Factory Fill
124.2 gal (US)
Hydraulic System
70.5 gal (US)
Dimensions*
Height
13.49 ft
Height
10.35 ft
Ground Clearance
1.8 ft
Wheel Base Length
14.93 ft
Overall Length
40.33 ft
Height
13.54 ft
Height
11.1 ft
Centerline of Rear Axle to Edge of Rear Bumper
10.28 ft
Centerline of Front Axle to Hitch
7.46 ft
Height
3.21 ft
C
3.31 ft
Rack Back Angle
47.8 °
Rack Back Angle
56.5 °
Height
17.82 ft
B
19.2 ft
Rack Back Angle
65 °
Dump Angle at Maximum Lift
45 °
Buckets
Bucket Capacities
6.3-7.0 m3
Maximum Bucket Capacity
9.2 yd³
Axles
Maximum Single
22.4 in
Front
Fixed
Rear
Oscillating ±13°
Brakes
Brakes
Meet SAE ISO 3450:1996
Cab
Cab
Meets SAE and ISO standards
Sound Performance
Meets ANSI, SAE and ISO standards
Steering
Steering
Meets SAE and ISO standards
Total Steering Angle
86 °
Loader Hydraulic System
Main Hydraulic System Output at 2010 rpm and 6900 kPa
130 gal/min
Relief Valve Setting
4500 psi
Cylinders
220 x 911 mm 8.7 x 35.9 in
Cylinders
220 x 1770 mm 8.7 x 69.7 in
Pilot System
20.1 gal/min
Relief Valve Setting
348.1 psi