New 992 Wheel Loader for Sale

992 Wheel Loader

Net Power

814 HP
Engine Model

Cat® C32B
Emissions

U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent
Rated Speed

1750 rpm

Engine

Net Power: 814 HP
Engine Model: Cat® C32B
Emissions: U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent
Rated Speed: 1750 rpm
Gross Power: 900 HP
Gross Power: 937 HP
Gross Power: 907 HP
Gross Power: 944 HP
Gross Power: 884 HP
Gross Power: 921 HP
Gross Power: 893 HP
Gross Power: 931 HP
Net Power: 814 HP
Net Power: 814 HP
Net Power: 823 HP
Net Power: 823 HP
Bore: 5.7 in
Stroke: 6.4 in
Displacement: 1963.5 in³
Peak Torque: 3514 ft·lbf
Peak Torque: 3555 ft·lbf
Peak Torque: 3537 ft·lbf
Peak Torque: 3570 ft·lbf

Operating Specifications

Operating Weight: 233430 lb
Rated Payload: 25.5 ton (US)
Rated Payload: 30 ton (US)
Rated Payload: 22.5 ton (US)
Rated Payload: 27 ton (US)
Bucket Capacity Range: 11.5-24.5 m³ (15-32 yd³)
Cat Truck Match: 775/777
Cat Truck Match: 785

Buckets

Bucket Capacities: 11.5-24.5 m³ (15-32 yd³)

Transmission

Transmission Type: Cat Planetary Powershift
Forward: 4.3 mile/h
Forward: 7.4 mile/h
Forward: 12.7 mile/h
Direct Drive: Disabled
Direct Drive: 8 mile/h
Direct Drive: 14 mile/h
Reverse: 4.7 mile/h
Reverse: 8.1 mile/h
Reverse: 13.9 mile/h
Direct Drive: 5 mile/h
Direct Drive: 8.8 mile/h
Direct Drive: 15.3 mile/h

Hydraulic System - Lift/Tilt

Lift: Positive Flow Control
Lift: Variable Displacement Piston
Maximum Flow at 2: 250 gal/min
Relief Valve Setting: 5000 psi
Lift Cylinder: 9.3 in
Lift Cylinder: 63.5 in
Tilt Cylinder: 11.5 in
Tilt Cylinder: 41.5 in

Hydraulic Cycle Times

Rack Back: 2.3 s
Rack Back: 2.3 s
Raise: 9 s
Raise: 9 s
Dump: 2.6 s
Dump: 2.6 s
Float Down: 3.2 s
Float Down: 3.2 s
Total Hydraulic Cycle Time: 17.1 s

Service Refill Capacities

Fuel Tank: 385.7 gal (US)
Cooling Systems: 59.4 gal (US)
Crankcase: 31.7 gal (US)
Transmission: 51.5 gal (US)
Differential: 96.4 gal (US)
Differential: 96.4 gal (US)
Hydraulic System Factory Fill: 104.1 gal (US)
Hydraulic Tank: 60.2 gal (US)
Hydraulic Factory Fill: 32.5 gal (US)
Hydraulic Tank: 26.3 gal (US)

Axles

Front: Fixed
Rear: Trunnion
Oscillation Angle: ±9°

Brakes

Brakes: ISO 3450:2011

Hydraulic System - Steering

Steering System: Pilot, Load Sensing
Steering System: Piston, Variable Displacement
Maximum Flow at 1: 70 gal/min
Steering Cut Off Pressure: 4500 psi
Total Steering Angle: 80°
Steering Cycle Times: 4.9 s
Steering Cycle Times: 3.1 s

Cooling System

Ambient Capability Hydraulically Driven Demand Fan: 109.4 °F
Ambient Capability: 131 °F

Sound Performance - Standard

Note: Machine Sound Level (ISO 6396:2008) - 116 dB(A)

Sound Performance - Suppression

Note: Machine Sound Level (ISO 6396:2008) - 113 dB(A)

Dimensions - Standard Lift - Approximate

Ground to Top of Exhaust Stacks: 17 ft
Ground to Top of ROPS: 18.3 ft
Ground to Top of Hood: 13.1 ft
Ground to Center of Front Axle: 4.3 ft
Ground to Bumper Clearance: 3.8 ft
Ground to Lower Hitch Clearance: 2.2 ft
Reach: 8.2 ft
Clearance at Maximum Lift: 15.2 ft
B: 22.8 ft
Maximum Overall Height: 30.8 ft
Rear Axle: 13.5 ft
Wheel Base: 19.3 ft
Tread Width: 10.83 ft
Rack Back Angle: 56.9 degrees
Dump Angle at Maximum Lift: -49.5 degrees
Rack Back Angle: 40.2 degrees
Width: 14.74 ft
Rack Back Angle: 48.9 degrees
Maximum Overall Length: 50.8 ft
Front Axle Centerline to Bucket Tip: 18 ft

Dimensions - High Lift - Approximate

Tread Width: 10.83 ft
Rack Back Angle: 42.5 degrees
Dump Angle at Maximum Lift: -48.1 degrees
Rack Back Angle: 56.2 degrees
Width: 14.75 ft
Rack Back Angle: 51.6 degrees
Ground to Top of Exhaust Stacks: 17 ft
Ground to Top of ROPS: 18.3 ft
Ground to Top of Hood: 13.1 ft
Ground to Center of Front Axle: 4.3 ft
Ground to Bumper Clearance: 3.8 ft
Ground to Lower Hitch Clearance: 2.2 ft
Reach: 7.6 ft
Clearance at Maximum Lift: 17.2 ft
B: 24.5 ft
Maximum Overall Height: 32 ft
Rear Axle: 13.5 ft
Wheel Base: 19.3 ft
Maximum Overall Length: 51.6 ft
Front Axle Centerline to Bucket Tip: 18.8 ft

POWER TRAIN
- Engine, C32B
- Fuel priming pump (electric)
- Ground-level engine shutdown
- Engine air intake (above hood) precleaner
- Aluminum Modular Radiator (AMR)
- Automatic, ether starting aid
- Electronic throttle lock
- Impeller Clutch Torque Converter (ICTC) with lock-up clutch
- Rimpull control system
- Planetary powershift, 3F/3R electronic control transmission
- Delayed engine shutdown
- Oil-cooled, multi-disc, service brakes
- Electro-hydraulic parking brake
- Auto retarding controls
- Brake temp estimator
- Autoshift
LINKAGE
- Standard lift (23 tonnes/25.5 tons face, 27.2 tonnes/30 tons loose)
EFFICIENCY
- Variable displacement implement pumps
- Variable displacement load-sensing steering
- Variable displacement cooling fan pump
- Torque converter lock-up clutch
- Bucket float
- Automatic bucket controls:
  – Lift kickout
  – Return-to-dig kickout
- Default on-demand throttle (economy mode) with HP+ mode button
- Engine idle shutdown
ELECTRICAL AND LIGHTING
- 150-amp alternator
- Four 1400 CCA batteries
- 10/15 amp, 24V to 12V converter
- Battery – single pole (master disconnect) isolator
- Emergency jump-start receptacle
- Starter and transmission lockout in bumper
- 24V starting and charging system
- Electric starters
- Live line indicators in service center
- LED warning lights (pattern selectable)
- LED lighting system:
  – Two front- and rear-mounted LED turn signals
  – Four forward-facing running lights
  – Three forward-facing flood lights
  – Four platform-mounted flood lights
  – Two forward-facing high beams
  – Four rear-facing floods
  – Four stairway lights
  – Two engine bay service lights
OPERATOR ENVIRONMENT
- Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment and two-way thigh support adjustment
- Bonded glass, tinted
- Trainer seat
- Dual-lever lift and tilt function controls
- Implement kickouts
- Air conditioner
- Cab pressure indicator
- Graphical touchscreen information display conveys real-time operating information and payload measurement
- Heater, defroster, auto temperature controls
- Gauge instrumentation with configurable widgets:
  – Status indicators
  – Wheel rev counter
  – Simplified payload
  – TPMS (optional)
  – Bucket angle
  – Coolant temperature
  – Hydraulic oil temperature
  – Fuel level
  – Power train oil temperature
  – Engine speed (tachometer)
  – Transmission gear
  – Ground speed
  – Engine hour meter
- Powered cab precleaner
- Operator presence status
- Starting/charging system malfunction
- Electronic OMM
- Operator controls help
- Two USB charging ports
- CB mounting, 12V/24V power and antenna
- 14-pin service port
- 12V power
- Selectable application profiles
- Entertainment radio mute
- Push-To-Start (PTS)
- Warning/indicator instrumentation
- Keypad control with indicator lights
- Dome light in cab
- Lunchbox and beverage holders
- Electro-hydraulic force feedback steering
- Vital Information Management System (VIMS^™) with information display: external data port, cycle timer
- Coat hook
SAFETY
- Ground-access ladders
- Rear-vision camera
- Front walkway around cab
- Tie-offs on ROPS
- Steering frame lock
- Stairways on both sides of the machine
- Platform toe kicks
- Retractable seatbelt, operator and trainer seat
- Back-up alarm
- Electric disc horns
- Implement lock switch
- Seatbelt warning
- Entertainment radio mute
MACHINE CONTROL AND GUIDANCE
- MineStar Health ready
  MineStar GUIDE ready
  MineStar Edge ready
COOLING
- Standard ambient package (recommended for site conditions that do not exceed 43° C [110° F])
SERVICE
- Ground-level service center including:
  – Implement and cooling fan oil level indicator
  – Steering and brake oil level indicator
  – Window washer fluid level indicator
  – Transmission oil level indicator
  – Fuel level indicator
  – Engine oil level indicator
  – Engine coolant level indicator
  – Automatic lubrication system grease tank level indicator
  – Starter lockout and LED
  – Heavy-duty battery disconnect switch
  – Stairway light switch
  – Service lighting switch (if equipped)
  – Fuel shutoff engine shutdown switch
  – Engine oil fast-fill port
  – Transmission oil fast-fill port
  – Steering and brake hydraulic oil fast-fill port
  – Steering and brake hydraulic oil drain port
  – Engine coolant fast-fill port
  – Implement and cooling fan hydraulic oil fast-fill port
  – Implement and cooling fan hydraulic oil drain port
  – Automatic lubrication system grease tank fill port
  – 24V jump-start receptacle
  – 12V power port
  – 120V jacket water plug (if equipped)
  – 240V jacket water plug (if equipped)
  – VIMS key switch
  – 14-pin service port
  – Transmission lockout and LED
- In-tank mounted cartridge-type case drain filters with in-line magnetic plugs on implement, cooling fan, brake and steering pumps
- High-pressure screens on the output side of implement, cooling fan, brake and steering pumps
- Implement pump efficiency monitoring
- Rock guards on linkage grease lines
- Cat O-ring face seal couplings
- Lockable service access doors
- Ecology drains for engine, radiator, hydraulic tank, steering and brake tank, brake cooling tank and axles
- Electronic pressure control of the automatic lubrication system eliminates pressure adjustment and monitors grease thickness for temperature compatibility
- Ground-level fast-fill fuel system
- Drawbar hitch with pin
- Cat XT^™ hoses
- Left-side service center
- Oil sampling valves
- Premixed 50% concentration of extended-life coolant with freeze protection to –34° C (–29° F)
- Rear access to cab and service platform
- Load-sensing steering
- Vandalism protection caplocks
- Cooling cleanout service access
- Telematics and Cat Electronic Technician service port in bumper
- Automatic Autolube filling shutoff valve

POWER TRAIN
- Advanced auto retarding controls with engine brake
LINKAGE
- High lift (20.5 tonnes/22.5 tons face, 24.5 tonnes/27 tons loose)
ELECTRICAL AND LIGHTING
- Dual pole battery isolator
- Six service lights
- Two hitch-mounted lights
OPERATOR ENVIRONMENT
- Rubber-mounted, high-impact resistant solar control glass
- Trainer seat with suspension
- Joystick lift and tilt function controls
- Bluetooth^®-enabled machine security
- Sun screen, pull down (front and rear)
- AM/FM/AUX radio
- AM/FM/AUX/USB/BT/CD/SAT radio
SAFETY
- Powered ground-access stairs
- Side-vision cameras (270 degree)
- Cat Detect (rear object detection)
- Wheel chocks
- Secondary steering
- Electric trumpet field horn plus electric shop horn
- Fire suppression ready (tank mounting provision and provision for integration with machine electronics for monitoring faults or activation)
- Emergency stop system
COLD WEATHER
- Cold-weather cooling fan bypass (recommended for temperatures below –29° C [–20° F])
- 120V or 240V coolant heating elements (recommended in conditions from –18° C to –30° C [0° F to –22° F])
- Fuel heater (heated by recirculation using engine heat and a heat exchanger) (recommended in conditions from –18° C to –30° C [0° F to –22° F])
- Heated mirrors
MACHINE CONTROL AND GUIDANCE
- Cat Payload with Overload Prevention
- New Autodig Components:
  – Tire slip prevention
  – Lift stall prevention
  – Tire set
- Operator coaching
COOLING
- High ambient package (recommended for site conditions that do not exceed 55° C [131° F])
RIMS AND TIRES
- Rims – 914.4 mm (36") (36 × 45)
  113.3 mm (4.5") flange
  For use with 45/65R45 and 45/65-45 tires
  Tires – 45/65R45
  Tires – 45/65-45
SPARE RIMS
- 914.4 mm (36") (36 × 45) (4.5") flange
SERVICE
- Transmission and engine guards
- Diagnostic lines for easy troubleshooting access
- Product Link^™ cellular
- Product Link (dual mode – satellite/cellular)
SOUND
- Sound-suppression package
LOAD AND CARRY OR EXTENSIVE TRAMMING
- Ride control