Underground - Hard Rock
R1700G Underground Mining Loader
-
Engine ModelCat® C11 ACERT™
-
Engine ModelCat® C11
-
Rated Power1800.0 rpm
-
Gross Power353 HP
Engine
- Engine Model
- Cat® C11 ACERT™
- Engine Model
- Cat® C11
- Rated Power
- 1800.0 rpm
- Gross Power
- 353 HP
- Engine Power
- 345 hp
- Engine Power
- 345 hp
- Bore
- 5.1 in
- Stroke
- 5.5 in
- Displacement
- 680 in³
- Bore
- 5.1 in
- Note
- Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
- Stroke
- 5.5 in
- Gross Power
- 241/263 kW (323/353 hp)
- Displacement
- 680.0 in3
- Note
- All rating conditions are based on ISO/TR 14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specification
- Note
- Engine derate will commence at an altitude of 3050 m (10,006 ft).
- Net Power
- 218/241 kW (293/323 hp)
- Note
- Optional Ventilation Reduction package available.
- Net Power
- 218/241 kW (293/323 hp)
- Note
- Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available.
- Net Power
- 218/241 kW (293/323 hp)
- Gross Power
- 353.0 hp
- Gross Power
- 353 hp
- Gross Power
- 242/263 kW (324/353 hp)
- Rated Power
- 1800 r/min
- Gross Power
- 353 HP
- Gross Power
- 242/263 kW (324/353 hp)
Operating Specifications
- Nominal Payload Capacity
- 27558.0 lb
- Nominal Payload Capacity
- 27558 lb
- Nominal Payload Capacity
- 27558 lb
- Nominal Payload Capacity
- 30865 lb
- Gross Machine Mass
- 116845 lb
- Gross Machine Mass
- 120151 lb
- Static Tipping Load
- 70065 lb
- Static Tipping Load
- 57995 lb
- Gross Machine Mass
- 115745 lb
- Breakout Force
- 46051 lb
- Gross Machine Mass
- 115745 lb
Weights
- Empty
- 84878.0 lb
- Empty
- 84878 lb
- Empty
- 37346 lb
- Empty
- 47532 lb
- Loaded
- 112436 lb
- Loaded
- 81741 lb
- Loaded
- 30695 lb
- Loaded
- 112436.0 lb
- Empty
- 37346.0 lb
- Empty
- 47532.0 lb
- Loaded
- 81741.0 lb
- Loaded
- 30695.0 lb
- Loaded
- 115743 lb
Transmission
- Forward 1
- 2.9 mph
- Forward
- 2.9 mile/h
- Forward 2
- 5.2 mph
- Forward
- 5.2 mile/h
- Forward 3
- 8.9 mph
- Forward
- 8.9 mile/h
- Forward 4
- 15.0 mph
- Forward
- 15 mile/h
- Reverse 1
- 3.3 mph
- Reverse
- 3.4 mile/h
- Reverse 2
- 5.8 mph
- Reverse
- 5.8 mile/h
- Reverse
- 10.2 mile/h
- Reverse
- 15.7 mile/h
Hydraulic Cycle Times
- Raise
- 6.8 s
- Dump
- 2.9 s
- Lower
- 2.4 s
- Total Cycle Time
- 12.1 s
Bucket Capacities
- Bucket Capacity
- 4.6-8.8 m³ (6.0-11.5 yd³)
- Dump Bucket
- 6 yd³
- Dump Bucket
- 6.5 yd³
- Dump Bucket
- 7.5 yd³
- Dump Bucket
- 8.6 yd³
- Dump Bucket
- 9.5 yd³
- Dump Bucket
- 11.5 yd³
- Ejector Bucket
- 7.5 yd³
- Dump Bucket
- 7.5 yd3
- Note
- High penetration bucket versions also available.
Turning Dimensions
- Outside Clearance Radius
- 270.8 in
- Inner Clearance Radius
- 127.1 in
- Axle Oscillation
- 8°
- Articulation Angle
- 44°
- Articulation Angle
- 44º
- Note
- **Clearance Dimensions are for reference only.
- Note
- **Clearance Dimensions are for reference only.
Tires
- Tire Size
- 26.5 × 25 36 PLY VSMS
- Tire Size
- 26.5 × 25
Service Refill Capacities
- Engine Crankcase
- 8.98 gal (US)
- Hydraulic Tank
- 33 gal (US)
- Cooling System
- 16.6 gal (US)
- Front Differential and Final Drives
- 23.8 gal (US)
- Rear Differential and Final Drives
- 23.8 gal (US)
- Fuel Tank
- 150.3 gal (US)
- Secondary Fuel Tank
- 117.8 gal (US)
- Cooling System
- 16.6 gal
- Engine Crankcase with Filter
- 8.98 gal
- Front Differential and Final Drives
- 16.1 gal
- Fuel Tank
- 150.3 gal
- Hydraulic Tank
- 33.0 gal
- Rear Differential and Final Drives
- 16.1 gal
- Transmission
- 12.4 gal
- Front Differential and Final Drives
- 23.8 gal (US)
- Rear Differential and Final Drives
- 23.8 gal (US)
- Transmission
- 12.4 gal (US)
Standards
- Brakes
- ISO 3450, AS2958.1, CAN-CSA424.30-M90
- Standards
- ROPS/FOPS Certified Cab
- Cab
- BS EN ISO 3449, SAE J231, AS2294.3
- Cab
- ISO 3471, SAE J1040, AS2294.2, EN13510
-
ELECTRICAL
- 12V Power Supply in Cab
- Alternator, 95-amp
- Auxiliary Start Receptacle
- Battery Disconnect Switch, Ground Level
- Circuit Breaker, 80-amp
- Corrosive Protection Spray
- Diagnostic Connector
- Electric Starting, 24-volt
- Engine Shutdown Switches
– Rear Right Hand Side - External Lighting System, Front, Rear, Halogen Work Lights
- Low Maintenance Batteries
- Reversing Alarm
- Starting and Charging System
-
OPERATOR ENVIRONMENT
- Cat Electronic Monitoring System (Cat EMS)
- Electric Horns
- Gauges
– Engine Coolant Temperature
– Transmission Coolant Temperature
– Hydraulic Oil Temperature
– Fuel Level
– Speedometer
– Tachometer - Indicator Lights
– Alert Warning Light
– Residual Brake Pressure - Low Hydraulic Level Warning
- Open Operator Station ROPS/FOPS Structure
- Operator Presence System (Auto Park Brake)
- Pilot Hydraulic Implement Controls, Single Joystick
- Push Button Panel for Lights
- Suspension Seat with Retractable Seat Belt
- STIC Steering
-
POWER TRAIN
- Cat C11 Diesel Engine, ATAAC, 6 Cylinder
- Brake Axle Cooling
- Electric Fuel Priming Pump
- Engine Air Intake Precleaner
- Engine Oil Filter, Remote Mounted
- Fuel System Manual Shut Off Tap
- Heat Shields
- Long Life Coolant
- Planetary Powershift Transmission with Automatic Shift Control, 4 Speed Forward/4 Speed Reverse
- Radiator, Cross Flow
- Radiator Cap Manual Release
- Rims, 5-Piece, Tubeless
- SAFR™ Full Hydraulic Enclosed Wet Multiple-Disc Brakes
- Torque Converter
- Transmission Neutralizer
- Transmission Filter Drain Tap
-
OTHER STANDARD EQUIPMENT
- Brake Light
- Bucket Control Group, Standard
- Bucket, Dump
- Bucket Lip
- Bucket Positioner, Return To Dig
- Catalytic Exhaust Purifier/Muffler Group
- Decals, International Picto Graphics
- Engine and Transmission Belly Guards
- Fenders, Front, Rear
- Firewall
- Fuel Lines Double Braided (Stainless Sleeving)
- Hand Hold (Access On/Off Top Deck)
- Hydraulic Oil Cooler – Swing Out Rear Frame
- Operation and Maintenance Manual – English and other applicable local languages to select
- Protection Wear Bars 100 × 50 mm (4 × 2 in)
- Rims, 5-Piece, Tubeless
- Semi Centralized Lubrication Points
- S·O·S Port
– Coolant
– Engine Oil
– Hydraulic Oil
– Transmission Oil - Swing Out Radiator Grill
- Tires and Rims: A tire must be selected from the mandatory attachments section of the machine price list. Base machine price includes a standard tubeless rim allowance only.
-
OPTIONAL EQUIPMENT
- Battery and Engine Shutdown Switch
– Ground Level Isolation, In Cab Isolation Switch - Brake Pressure Gauges
- Brake Release Arrangements, (Requires Lines Steering Release)
– Recovery Hook
– Recovery Bar - Buckets
– Bucket, Light Weight Material (8.8 m³/11.5 yd³) (Requires Control Group, Heavy Duty)
– Ejector Bucket Installed
– Various Sizes, Dump (4.2 m³/5.5 yd³ to 7.3 m³/9.5 yd³), Ejector (5.7 m³/7.5 yd³) - Bucket, Control Group, Heavy Duty (Required for Light Weight Buckets)
- Bucket Hardware
– Cutting Edge, Bolt-On Half-Arrow (BOHA)
– Cutting Edge, Cat Weld-on
– Cutting Edge, Half Arrow, Flat
– Heel Shrouds, Ejector and Dump Buckets
– Mechanically Attached Shrouds (MAS)
– Mechanically Attached Wear Plate System, Cutting Edge Protection (MAWPS)
– Mechanically Attached Wear Plate System, Bottom Protection (MAWPS)
– Protector Pads (Bottom of Bucket)
– Wear Bars, Ejector and Dump Buckets
– Wear Liner (5.7 m³/7.5 yd³ Dump Bucket) - Bucket Lip
– Lip Fully Welded or Tack Welded
– Lip Bare (No Hardware)
– Bolt-On Ready
– MAS Ready (Mechanically Attached Shrouds) - Camera, Color Rear Facing
- Cover, Anti Vandalism for Shipping
- Draw Bar Attachment, Bolt-on
- Engine Options
– Engine, Ventilation Reduction (VR)
– Equivalent to Tier 3
– After-treatment options (for use with VR Engine only)- DPF (Flow Through) Filter
- Fast Fill System
– Coolant
– Engine Oil
– Fuel (Single or Dual Tanks)
– Hydraulic Oil
– Transmission Oil - Fire Suppression System
– Ansul, Dry Powder
– Foam, Water Based - Front Light Protectors
- Fuel System
– Dual Fuel Tanks - Guards
– Guard, Rear Side Quarter Window
– Guard Duo Cone Seal - Handrails
– Fold Down - Hydraulic System
– Ejector Bucket Ready
– Alternate Implement/Pilot Control Configuration - Lubrication System
– Automatic
– Centralized - Lighting
– External Lighting System, Front, Rear, LED Work Lights - Mine Transfer
– Mine Transfer Ready Rear Frame (Tack Welded)
– Lifting Group, Mine Transfer - Operators Station ROPS/FOPS Enclosed
– Air Conditioning
– Cab Pressurizer and Filter
– Duct, Window Demister
– Dome Light
– Heater
– Radio Ready Compartment for Radio and Speakers
– Strut, Cab Door - Operators Station FOPS Open
– Removable Canopy - Park Brake Switch Engagement
– Push to Apply
– Pull to Apply - Payload Control System
– Loadrite L2180 - Remote Control Interface (excludes Transmitter and Receiver)
– Cattron
– RCT - Reversible Steering
- Reflective Tape
- Ride Control System
- Rim
– Rim Identification Numbering
– Spare (Tube or Tubeless)
– Tube Type - Seats
– Seat Covers, Tee, Air and Standard
– Suspension Seat Tee, Vinyl
– Suspension Seat Tee, Air
– Suspension Seat Air Vinyl - Secondary Steering System
- Service Tools
– Recovery Bar (for use with Brake Release, Recovery Bar System)
– Reference Parts Manual for Additional Tooling Available - Switches
– Additional Engine Shutdown, Mounted LHS
– Engine Shutdown, Fire Suppression Activation
– Idle Timer
– Engine Shutdown/Idle Timer
– Transmission Neutralizer Override Switch - Technology
– Command for Underground
– Vital Information Management System (VIMS) Gen 3 - Tire Arrangements
– Tire, 26.5 × R25, VSMS2 L5 Bridgestone
– Tire, 26.5 × 25, VSDL, Bridgestone
– Tire, 26.5 × 25, 32 Ply, Goodyear - Wear Protection Bars
– Cab/ROPS
– Hydraulic Tank
– Radiator
– Wear Plate, Rear Underneath - NOTE: Not all features are available in all regions. See your Cat dealer for more information.
- Battery and Engine Shutdown Switch