Electric Power
G3520 2500kW Gas Generator Set
-
Gas Standby Rating2500 ekW @ 0.8pf
-
Fuel TypeNatural Gas, Hydrogen Blend (up to 5%)
-
EmissionsU.S. EPA Stationary Non-Emergency Certified
-
RPM1800 rpm
Generator Set Specifications
- Gas Standby Rating
- 2500 ekW @ 0.8pf
- Fuel Type
- Natural Gas, Hydrogen Blend (up to 5%)
- Emissions
- U.S. EPA Stationary Non-Emergency Certified
- RPM
- 1800 rpm
- Frequency
- 60 Hz
- Compression Ratio
- 11.5
Engine Specifications
- Engine Model
- G3520
- Displacement
- 5956 in³
- Aspiration
- TA
- Bore
- 6.7 in
- Stroke
- 8.5 in
Generator Set Dimensions
- Length
- 336 in
- Width
- 94 in
- Height
- 128 in
- Weight
- 48500 lb
-
Air Inlet
- Two-element single-stage air cleaner with enclosure and service indicator
-
Control Panel
- Cat ECS 100
-
Cooling
- Jacket water and SCAC engine-driven pumps
- Jacket water and SCAC thermostats
-
Exhaust
- Cat-flanged face outlet on turbocharger
- Individual exhaust port and turbocharger outlet wired to integrated temperature sensing module (ITSM) with GCEM providing alarms and shutdowns
- Dry exhaust manifolds, insulated and shielded
-
Fuel System
- Gas pressure regulator
- Engine-installed electronic control valve
- Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve
- 24V DC energized-to-run (ETR) gas shutoff valve
- Throttle plate, 24V DC actuator, controlled by GECM
-
General
- Crankshaft vibration damper and guard
- Operation and maintenance manuals
- RH Service
- Paint- Caterpillar Yellow with high gloss black rails and radiator
- Parts book
-
Generator
- SR5
- Permanent Magnet Excitiation
- NEMA Class H insulation
- Winding temperature detectors
- Integrated voltage regulator (IVR)
- Anti-condensation space heater
-
Starting/Charging
- Battery with cables and rack (shipped loose)
- 24V starting motors
- Electric Starter
- Jacket water heater
-
Governing System
- ADEM A4
-
Ignition System
- Electronic Ignition System (controlled by ADEM A4)
- Individual Cylinder Detonation Sensitive Timing (DST)
-
Air Inlet
- Air cleaner with precleaner
-
Control Panel
- Local alarm module
- EMCP 4.4
- Remote annunciator
- Remote PC monitoring
- Engine failure relay
- Local PC monitoring
-
Circuit Breakers
- 2000A, 2500A, 3000A 3 Pole, UL-100% Rated Masterpact Circuit Breakers
- 100% rated, 3-pole (UL/CSA/IEC) 5th Digit Rating
- 3-pole (IEC 947-2 rated)
- Frame mounting
- 1600A, 2000A 3 Pole, UL-100% Rated R-Frame Circuit Breakers
- S LSI, G LSIG, P LSIG-P, 4th Digit Type
-
Cooling
- Coolant level drain line with valves, fan with guard
- Package mounted radiator
-
Exhaust
- 305 mm (12 in.) muffler
- 305 mm (12in.) elbow
- 18, 25 dBA Attenuation
- 305 mm (12 in.) flange
- 305mm (12 in) spark arresting muffler
-
Fuel System
- 3, 0-100 kPag, 4-20mA gas train pressure sensors
-
General
- Digital diagnostic tool
-
Generator
- Low voltage extension box
- Bearing temperature detectors
- European bus bars
- Cable access box
- Generator air filter
-
Starting/Charging
- 45A, 24V charging alternator (requires engine driven pumps)
- 20A, 24VDC battery charger
-
Grid Code Compliance
- 60 Hz: USA
Mulchers: HM418 High Flow XHP Hydraulics Mulcher 
Multi-Processor with Concrete Cutter Jaws: MP324 Concrete Cutter Jaw 
Mulchers: HM215 High Flow Mulcher 
Mulchers: HM316 High Flow XPS Hydraulics Mulcher 
Mulchers: HM416 High Flow XHP Hydraulics Mulcher 
Mulchers: HM208 Mulcher 
Mulchers: HM210 Mulcher 
Mulchers: HM112 Standard Flow Mulcher 
Mulchers: HM115 Standard Flow Mulcher 
Material Handling: 4585mm (180in) Mat’l handing Arm, Fusion™ 
Hammers: H215 S Hydraulic Hammer 
Material Handling: Material Handling Arm For Compact Products 
Material Handling: 3941 mm (155 in) Material Handling Arms – Loader 
Hammers: H180 S Hydraulic Hammer 
Hammers: H140 S Hydraulic Hammer 
Hammers: H160 S Hydraulic Hammer 
Hammers: H190 S Hydraulic Hammer 
Hammers: H130 S Hydraulic Hammer 
Hammers: H120 S Hydraulic Hammer