Gas Compression Electric Motors
CN1566 Electric Motor
-
Voltage4000V ± 10%/60 Hz
-
Type of EXClass 1 Division 2 Group A,B,C,D T3 (NEC or CEC)
-
Electric Motor TypeSquirrel Cage Induction Motor
-
Number of Poles6 poles
Electric Motor Specifications
- Voltage
- 4000V ± 10%/60 Hz
- Type of EX
- Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC)
- Electric Motor Type
- Squirrel Cage Induction Motor
- Number of Poles
- 6 poles
- Full Load Speed
- 1189 r/min
- Mounting Designation
- F1 or F2
- Enclosure Type
- WP-II
- Insulation
- Class F
- Service Factor
- 1.15 SF (1.0 VFD)
- Standards
- NEMA MG1
- Maximum Ambient Temperature
- 104 °F
- Maximum Altitude
- 3000 ft
- Duty
- Continuous
- Temperature Rise
- Class B at rated load
- Connection of Stator Winding
- Star
- Full Load Current
- 202 Amps
- Locked Rotor Amps
- 500% Code E
- Locked Rotor Torque
- 60%
- No Load Current
- 67 Amps
- Rated Torque
- 6625 lb/ft
- Shaft
- 5.1 in
-
Bearings
- Bearing RTDs for temperature monitoring
- Insulated non-drive end bearings to reduce bearing currents
- Anti-friction on 1500 hp (optional)
-
Rotors
- Designed for minimal vibration
- Dynamic balancing at full operational speed
- Fabricated copper squirrel cages
- Oversized, forged, keyless shaft
- AISI 4140/DIN42CrMo4 shaft
-
Stators
- Radial air ducts ensure uniform and efficient cooling
- Vacuum pressure impregnated with specially formulated epoxy resin
- 2X RTDS per Phase
- Space heater
- Welded and machined stator core retains its rigidity throughout motor life to ensure a sealed and homogeneous insulation system that results in high dielectric strength, excellent heat transfer and the elimination of hazardous internal partial discharges
Material Handling: 4121mm (162in) Mat’l Handling Arm, Fusion™ 
Material Handling: 3941 mm (155 in) Material Handling Arms – Loader 
Hammers: H215 S Hydraulic Hammer 
Hammers: H190 S Hydraulic Hammer 
Material Handling: Material Handling Arm For Compact Products 
Hammers: H180 S Hydraulic Hammer 
Hammers: H160 S Hydraulic Hammer 
Hammers: H140 S Hydraulic Hammer 
Hammers: H120 S Hydraulic Hammer 
Hammers: H130 S Hydraulic Hammer 
GC Hammers: H180 GC S Hammer 
Hammers: H110 S Hydraulic Hammer 
Hammers: H115 S Hammer 
GC Hammers: H160 GC S Hammer 
GC Hammers: H130 GC S Hammer 
GC Hammers: H120 GC S Hammer 
Grapples: Trash Grapple, 324/328/329 Excavator 
GC Hammers: H110 GC S Hammer 
GC Hammers: H115 GC S Hammer