Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Gas Compression Engines

CG137-12 Gas Engine

  • Minimum Rating
    600.0 bhp
  • Minimum Rating
    600 BHP
  • Maximum Rating
    600.0 bhp
  • Maximum Rating
    600 BHP
Engine Specifications
Minimum Rating
600.0 bhp
Minimum Rating
600 BHP
Maximum Rating
600.0 bhp
Maximum Rating
600 BHP
Emissions
NSPS 2010
Emissions
NSPS 2010
Displacement
1648.0 in3
Displacement
1648 in³
Compression Ratio
8.3:1
Compression Ratio
8.3:1
Aspiration
Turbocharged-Aftercooled
Aspiration
Turbocharged-Aftercooled
Rotation
Counterclockwise
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 14 or 18, Flywheel Housing SAE No. 0
Flywheel and Flywheel Housing
SAE No. 14 or 18, Flywheel Housing SAE No. 0
Flywheel Teeth
136
Flywheel Teeth
136
Weight
6250 lb
Oil Change Interval
750 hours
Oil Change Interval
750 hours
Ignition
Electronic ADEM A4
Air
Electronic ADEM A4
Stroke
6.0 in
Stroke
6 in
Bore
5.4 in
Bore
5.4 in
Capacity for Liquids
Cooling System
20.0 gal
Cooling System
20 gal (US)
Lube Oil System
45.0 gal
Lube Oil System
45 gal (US)
  • Air Inlet System
    • Air cleaner — single element with service indicator
    • Optional air inlet adapter and rain cap — recommended for weather protection
  • Control System
    • ADEM A4
    • Class 1, Division 2, Group C&D and Zone 2
  • Cooling System
    • Jacket water thermostats and housing — full open temperature 98°C (208°F)
    • Jacket water pump — gear driven, centrifugal, non-self-priming
    • Aftercooler water pump — gear driven, centrifugal, non-self-priming
    • Aftercooler core — for treated water and sea air atmosphere
  • Exhaust System
    • Exhaust manifolds — watercooled
    • Exhaust elbow — dry 203 mm (8 in)
    • Three-way catalyst — 1.0 g NOx and 0.5 g NOx NTE options
  • Flywheels & Flywheel Housings
    • Flywheel, SAE No. 14 or 18
    • Flywheel housing, SAE No. 0
    • SAE standard rotation
  • Fuel System
    • Air/fuel ratio control
    • Gas pressure regulator
    • Natural gas carburetor
  • Lube System
    • Crankcase breather — top mounted
    • Oil cooler
    • Oil filter — RH
    • Oil filler in valve cover, dipstick — RH
  • Mounting System
    • Engine mounting rails — 254 mm (10 in) industrialtype, entire length
  • Protection System
    • ADEM A4 protection
    • The following include alarm and shutdown:
    • The following is display only
  • General
    • Paint, Caterpillar yellow
    • Crankshaft vibration damper and drive pulleys
    • Lifting eyes
    • Cylinder block inspection covers
  • Charging Alternator
    • 24V, 35A CSA alternator
  • Exhaust System
    • Exhaust flex fitting
    • Exhaust elbow
    • Exhaust flange — ANSI
  • Instrumentation
    • Operator interface panel
    • Operator interface panel enclosure
    • 15', 20', 50' interconnect harness
  • Starting System
    • Air pressure regulator
    • Air start silencer
    • Vane starter
    • Electric starter
    • Turbine starter
  • Fuel System
    • Fuel filter
  • Air Inlet System
    • Precleaner
    • Rain cap