Gas Compression Engines
G3406 Gas Compression Engine
-
Minimum Rating215.0 bhp
-
Maximum Rating325 BHP
-
Maximum Rating325.0 bhp
-
EmissionsNSPS Site Compliant Capable
Engine Specifications
- Minimum Rating
- 215.0 bhp
- Maximum Rating
- 325 BHP
- Maximum Rating
- 325.0 bhp
- Emissions
- NSPS Site Compliant Capable
- Emissions
- NSPS Site Compliant Capable
- Displacement
- 891 in³
- Displacement
- 891.0 in3
- Minimum Rating
- 215 BHP
- Compression Ratio
- 9.4:1
- Compression Ratio
- 9.4:1
- Aspiration
- Naturally Aspirated or Turbocharged-Aftercooled
- Aspiration
- Naturally Aspirated or Turbocharged-Aftercooled
- Rotation
- Counterclockwise
- Rotation from Flywheel End
- Counterclockwise
- Flywheel and Flywheel Housing
- SAE No. 1
- Flywheel and Flywheel Housing
- SAE No. 1
- Flywheel Teeth
- 113
- Flywheel Teeth
- 113
- Weight
- 3000 lb
- Oil Change Interval
- 750 hours
- Oil Change Interval
- 750 hours
- Ignition
- Altronic III
- Stroke
- 6.5 in
- Stroke
- 6.5 in
- Bore
- 5.4 in
- Bore
- 5.4 in
Capacity for Liquids
- Cooling System
- 10.0 gal
- Cooling System
- 10 gal (US)
- Lube Oil System
- 20.0 gal
- Lube Oil System
- 20 gal (US)
-
Air Inlet System
- Air cleaner — heavy-duty
- Air cleaner rain cap
- Service indicator
-
Control System
- Governor — Woodward PSG mechanical
- Governor locking — positive control
-
Cooling System
- Thermostats and housing
- Jacket water pump
- Aftercooler water pump
- Aftercooler core
-
Exhaust System
- Watercooled exhaust manifolds
- Dry exhaust elbow
-
Flywheel & Flywheel Housing
- SAE No. 1 flywheel
- SAE No. 1 flywheel housing
- SAE standard rotation
-
Fuel System
- Gas pressure regulator
- Natural gas carburetor
-
Ignition System
- Altronic III ignition system
-
Instrumentation
- Service meter
-
Lube System
- Crankcase breather — top mounted
- Oil cooler
- Oil filter — RH
- Auxiliary oil reservoir
- Oil pan — full sump
- Oil filler in valve cover, dipstick — RH
-
Mounting System
- Engine supports
-
Protection System
- Shutoffs
-
General
- Paint — Cat yellow
- Crankshaft vibration damper and drive pulleys
- Lifting eyes
-
Air Inlet System
- Precleaner
-
Charging System
- Battery chargers
- Charging alternators
- Charging alternators f/u/w c customer supplied shutoffs
- Ammeter gauge
- Ammeter gauge and wiring
- Control mounting
-
Control System
- PSG Woodward governor
-
Cooling System
- Radiators
- Non-sparking blower fan
- Blower fans for customer supplied radiators
- Fan drives for customer supplied radiators
- ATAAC conversion
- Aftercooler
- Expansion tank
- Heat exchangers
-
Exhaust System
- Flexible fittings
- Elbow
- Flange
- Pipe
- Rain cap
- Muffler
-
Fuel System
- Fuel filter
- Natural gas valve and jet kits
-
Ignition System
- CSA shielded ignition
- Wiring harness
-
Instrumentation
- Gauges and instrument panels
-
Lube System
- Auxiliary oil reservoir removal
- Lubricating oil
-
Mounting System
- Vibration isolators
-
Power Take-Offs
- Auxiliary drive pulleys
- Enclosed clutch and clutch support
- Front stub shaft and flywheel stub shaft
-
Protection System
- Gas valves
-
Starting System
- Air starting motor
- Electric air start control
- Air pressure regulator
- Air silencer
- Electric starting motor— single 12- and 24-volt
- Starting aids
- Battery sets, cables, and rack
-
General
- Damper guard
Mulchers: HM112 Standard Flow Mulcher 
Mulchers: HM115 Standard Flow Mulcher 
Material Handling: 4585mm (180in) Mat’l handing Arm, Fusion™ 
Material Handling: 3941 mm (155 in) Material Handling Arms – Loader 
Material Handling: Material Handling Arm For Compact Products 
Hammers: H215 S Hydraulic Hammer 
Hammers: H190 S Hydraulic Hammer 
Hammers: H180 S Hydraulic Hammer 
Hammers: H160 S Hydraulic Hammer 
Hammers: H120 S Hydraulic Hammer 
Hammers: H130 S Hydraulic Hammer 
Hammers: H140 S Hydraulic Hammer 
GC Hammers: H160 GC S Hammer 
Hammers: H110 S Hydraulic Hammer 
Hammers: H115 S Hammer 
GC Hammers: H180 GC S Hammer 
GC Hammers: H130 GC S Hammer 
GC Hammers: H115 GC S Hammer 
GC Hammers: H120 GC S Hammer