Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Gas Compression Engines

G3508B Low Emissions Gas Compression Engine

  • Minimum Rating
    690.0 bhp
  • Maximum Rating
    690 BHP
  • Maximum Rating
    690.0 bhp
  • Emissions
    NSPS Site Compliant Capable
Engine Specifications
Minimum Rating
690.0 bhp
Maximum Rating
690 BHP
Maximum Rating
690.0 bhp
Emissions
NSPS Site Compliant Capable
Emissions
NSPS Site Compliant Capable
Minimum Rating
690 BHP
Ignition
ADEM™ A3
Displacement
2115 in³
  • Air Inlet System
    • Axial Flow Air cleaner
    • Cleanable
    • Single element canister type with service indicator
  • Control System
    • ADEM A3 with integrated electronic throttle control
    • CSA certified
  • Cooling System
    • Two-stage charge air cooling
    • Thermostats and housing
    • Gear-driven jacket and aftercooler water pump
    • Stainless steel aftercooler cores
  • Exhaust System
    • Dry exhaust manifolds
    • Exhaust outlet: 200 mm I.D.
  • Flywheels and Flywheel Housings
    • SAE No. 00 flywheel
    • SAE No. 00 flywheel housing
    • SAE standard rotation
  • Fuel System
    • 7-50 psi gas supply
    • Electronic fuel metering valve
    • Gas pressure regulator, pivot valve operated
  • Ignition System
    • ADEM A3
    • Outdoor CSA certified
  • Lubrication System
    • Crankcase breather — top mounted
    • Oil cooler
    • Oil filter — RH
    • Oil pan
    • Oil sampling valve
    • Turbo oil accumulator
  • Power Take-Offs
    • Front housing — two-sided
    • Front lower — LH accessory drive
  • Torsional Vibration Analysis
    • Provided through Caterpillar, required through Q1 2010
  • General
    • Paint — Cat yellow
    • Crankshaft vibration damper and guard
  • Air Inlet System
    • Round air inlet adaptors
  • Charging System
    • Battery chargers
    • CSA certified version available with
  • Cooling System
    • Mechanical joint assembly connections
  • Exhaust System
    • Flexible fittings
    • Elbows
    • Flanges
  • Fuel System
    • Gas filter
  • Instrumentation
    • Advisor display panel
    • Communications module
  • Lubrication System
    • Lubricating oil
    • Oil bypass filter
    • Air prelube pump
  • Power Take-Offs
    • Front stub shaft
    • Pulleys
  • General
    • Special paint
  • EU Certification
    • EEC DOI certification
  • Support
    • Factory commissioning
Material Handling: 4121mm (162in) Mat’l Handling Arm, Fusion™
Material Handling: 3941 mm (155 in) Material Handling Arms – Loader
Material Handling: 4585mm (180in) Mat’l handing Arm, Fusion™
Hammers: H215 S Hydraulic Hammer
Hammers: H190 S Hydraulic Hammer
Material Handling: Material Handling Arm For Compact Products
Hammers: H180 S Hydraulic Hammer
Hammers: H160 S Hydraulic Hammer
Hammers: H140 S Hydraulic Hammer
Hammers: H120 S Hydraulic Hammer
Hammers: H130 S Hydraulic Hammer
GC Hammers: H180 GC S Hammer
Hammers: H110 S Hydraulic Hammer
Hammers: H115 S Hammer
GC Hammers: H160 GC S Hammer
GC Hammers: H130 GC S Hammer
GC Hammers: H120 GC S Hammer
Grapples: Trash Grapple, 324/328/329 Excavator
GC Hammers: H110 GC S Hammer
GC Hammers: H115 GC S Hammer
Grapples: Trash Grapple, 315/316/318 Excavators