Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Gas Compression Engines

G3512 Low Emissions Gas Compression Engine

  • Minimum Rating
    790.0 bhp
  • Maximum Rating
    1004 BHP
  • Maximum Rating
    1004.0 bhp
  • Emissions
    NSPS Site Compliant Capable
Engine Specifications
Minimum Rating
790.0 bhp
Maximum Rating
1004 BHP
Maximum Rating
1004.0 bhp
Emissions
NSPS Site Compliant Capable
Emissions
NSPS Site Compliant Capable
Minimum Rating
790 BHP
Ignition
ADEM™ A3
Air
ADEM™ A3
Displacement
3158 in³
  • Air Inlet System
    • Air cleaner — intermediate-duty with service indicator
  • Cooling System
    • High temperature circuit (engine jacket + oil cooler):
    • Low temperature circuit (aftercooler):
  • Exhaust System
    • Watercooled exhaust manifolds
    • Crankcase breather — top mounted
  • Flywheels & Flywheel Housings
    • SAE No. 00 flywheel
    • SAE No. 00 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Gas pressure regulator
    • Natural gas carburetor
  • Instrumentation
    • Advisor panel
  • Lubrication System
    • Oil cooler
    • Oil filter — RH
    • Oil bypass filter (TA or NA engines only)
    • Oil pan — shallow
    • Oil sampling valve
    • Turbo oil accumulator
  • Mounting System
    • Rails, engine mounting — 254 mm (10 in.)
  • Protection System
    • Electronic shutoff system
    • Gas shutoff valve
  • General
    • Paint — Cat yellow
    • Vibration damper and guard — dual 484 mm (23 in.)
  • Air Inlet System
    • Remote air inlet adapters
    • Precleaners
  • Charging System
    • Battery chargers
    • Charging alternator
  • Cooling System
    • Cleanable aftercooler core
    • Connection flanges
    • Expansion and overflow tank
    • Water level switch gauge
  • Exhaust System
    • Flexible fittings
    • Elbows
    • Connection flanges
    • Exhaust expanders
    • Rain cap (NA engine only)
    • Mufflers
  • Fuel System
    • Low pressure gas conversions
    • Propane gas valve and jet kits
    • Fuel filter
    • Air/fuel ratio control
  • Instrumentation
    • PL1000 communications modules
  • Lubrication System
    • Oil bypass filter removal
    • Oil pan accessories
    • Sump pump
    • Air prelube pump
    • Manual prelube pump
    • Lubricating oil
  • Mounting System
    • Rails
    • Vibration isolators
  • Power Take-Offs
    • Front accessory drives
    • Auxiliary drive shafts and pulleys
    • Front stub shaft
    • Pulleys
  • Protection System
    • Crankcase explosion relief valves
  • Starting System
    • Air starting motor
    • Air pressure regulator
    • Air silencer
    • Electric air start controls
    • Electric starting motors — dual 24-volt
    • Battery sets (24-volt dry), cables, and rack
  • General
    • Flywheel guard removal
    • Engine barring group
    • Premium 8:1 pistons
Mulchers: HM112 Standard Flow Mulcher
Material Handling: 4137 mm (163 in) Material Handling Arm, Fusion
Material Handling: 3941 mm (155 in) Material Handling Arms – Loader
Material Handling: 4121mm (162in) Mat’l Handling Arm, Fusion™
Material Handling: 4585mm (180in) Mat’l handing Arm, Fusion™
Material Handling: Material Handling Arm For Compact Products
Hammers: H215 S Hydraulic Hammer
Hammers: H190 S Hydraulic Hammer
Hammers: H160 S Hydraulic Hammer
Hammers: H180 S Hydraulic Hammer
Hammers: H120 S Hydraulic Hammer
Hammers: H130 S Hydraulic Hammer
Hammers: H140 S Hydraulic Hammer
Hammers: H110 S Hydraulic Hammer
Hammers: H115 S Hammer
GC Hammers: H130 GC S Hammer
GC Hammers: H160 GC S Hammer
GC Hammers: H180 GC S Hammer
GC Hammers: H115 GC S Hammer
GC Hammers: H120 GC S Hammer
GC Hammers: H110 GC S Hammer