Gas Compression Engines
G3516B LE Gas Engine
-
Minimum Rating1380.0 bhp
-
Maximum Rating1380 BHP
-
Maximum Rating1380.0 bhp
-
EmissionsNSPS Site Compliant Capable
Engine Specifications
- Minimum Rating
- 1380.0 bhp
- Maximum Rating
- 1380 BHP
- Maximum Rating
- 1380.0 bhp
- Emissions
- NSPS Site Compliant Capable
- Emissions
- NSPS Site Compliant Capable
- Displacement
- 4230 in³
- Displacement
- 4230.0 in3
- Minimum Rating
- 1380 BHP
- Aspiration
- Turbocharged-2 Stage Aftercooled
- Aspiration
- Turbocharged-2 Stage Aftercooled
- Flywheel and Flywheel Housing
- SAE No. 00
- Flywheel and Flywheel Housing
- SAE No. 00
- Flywheel Teeth
- 183
- Flywheel Teeth
- 183
- Weight
- 18520 lb
- Oil Change Interval
- 1000 hr
- Oil Change Interval
- 1000 hr
- Ignition
- ADEM™ A3
- Stroke
- 7.5 in
- Stroke
- 7.5 in
- Bore
- 6.7 in
- Bore
- 6.7 in
Capacity for Liquids
- Cooling System
- 58.5 gal
- Cooling System
- 58.5 gal (US)
- Lube Oil System
- 112.0 gal
- Lube Oil System
- 112 gal (US)
-
Air Inlet System
- Axial flow air cleaners
- Service indicator
- Cleanable
-
Cooling System
- Two-stage charge air cooling:
- Engine cooling and charge air cooling thermostats
-
Exhaust System
- Dry exhaust manifolds and turbocharger housings
-
Flywheels and Housings
- SAE 00 flywheel
- SAE 00 flywheel housing
- SAE standard rotation
-
Fuel System
- Electronic fuel metering valve
- Requires 7-50 psig gas supply
- Gas pressure regulator
- Gas shutoff valve
-
Instrumentation
- Remote-mounted Advisor control panel
- Interconnect harness
-
Lube System
- Top-mounted crankcase breathers
- Oil cooler
- Oil filter and oil sampling valve
- Drain valve
- Turbo oil accumulator
- API B16.3 approved gas/air-driven pre-lube system
-
Torsional Vibration Analysis
- Caterpillar provided
-
Mounting
- Rails
-
Control Panels
- 4" LCD Advisor display panel
- Shipped loose
-
Starting System
- 90 psi TDI starter
- 150 psi TDI starter
-
Power Take-Offs
- Front housing, two sided
- Front lower LH accessory drive
-
Protection System — Display/Alarm/Shutdown
- Low oil pressure
- Oil filter differential pressure
- High fuel or oil temperature
- Engine oil to engine coolant
- Differential temperature
- High coolant temperature
- Engine speed
- Engine load
- Battery voltage
- Detonation
- Manifold air temperature
- Coolant JW inlet/outlet pressure
- Left turbo inlet temperature
- Right turbo inlet temperature
- Cylinder port temperature
-
Protection System — Display Only
- Service hours
- Oxygen level
-
General
- Paint — Cat yellow
- Dual 23" vibration damper with guard
- CSA Certification, Class 1 Division 2 Groups C and D
-
Air Inlet System
- Rectangular air inlet adapter
- Circular air inlet adapter
-
Charging System
- Battery Charger 20 amp
-
Connections
- Mechanical joint assembly
- Inlet connection
-
Exhaust System
- Flexible fittings available at first production build
- Elbows and mufflers
-
Instrumentation
- Optional interconnect harness
-
Lube System
- Shipped with lube oil
-
Mounting System
- Rails
-
Power Take-Offs
- Front stub shaft
-
Literature
- Options available
Mulchers: HM112 Standard Flow Mulcher 
Material Handling: 4137 mm (163 in) Material Handling Arm, Fusion 
Material Handling: 3941 mm (155 in) Material Handling Arms – Loader 
Material Handling: Material Handling Arm For Compact Products 
Hammers: H215 S Hydraulic Hammer 
Hammers: H190 S Hydraulic Hammer 
Hammers: H160 S Hydraulic Hammer 
Hammers: H180 S Hydraulic Hammer 
Hammers: H120 S Hydraulic Hammer 
Hammers: H130 S Hydraulic Hammer 
Hammers: H140 S Hydraulic Hammer 
Hammers: H110 S Hydraulic Hammer 
Hammers: H115 S Hammer 
GC Hammers: H130 GC S Hammer 
GC Hammers: H160 GC S Hammer 
GC Hammers: H180 GC S Hammer 
GC Hammers: H115 GC S Hammer 
GC Hammers: H120 GC S Hammer 
GC Hammers: H110 GC S Hammer