Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Gas Compression Engines

G3516J Gas Engine

  • Emissions
    U.S. EPA Spark Ignited Stationary NSPS emissions
  • Minimum Rating
    1380 BHP
  • Maximum Rating
    1380 BHP
  • Displacement
    4211 in³
Engine Specifications
Emissions
U.S. EPA Spark Ignited Stationary NSPS emissions
Minimum Rating
1380 BHP
Maximum Rating
1380 BHP
Displacement
4211 in³
Aspiration
Turbocharged-2 Stage aftercooled
Oil Change Interval
1000 hrs
Stroke
7.5 in
Bore
6.7 in
Combustion
Lean Burn
Governor
Electronic (ADEM A3)
Lube Oil System
423 L (112 gal)
  • Air Inlet System
    • Axial flow air cleaners
    • Single element canister type with service indicator
  • Cooling System
    • Two-stage charge air cooling system
    • Engine cooling and charge air cooling thermostats
  • Exhaust System
    • Watercooled exhaust manifolds
    • Dry Turbocharger housings
    • Water-cooled exhaust elbow
  • Flywheels & Flywheel Housings
    • SAE No. 00 flywheel housing
    • SAE standard rotation
    • SAE No. 21 Flywheel
  • Fuel System
    • 7-40 psig gas supply
    • Electronic fuel metering valve
    • Gas pressure regulator
    • Gas shutoff valve
    • Fuel System
  • Instrumentation
    • Remote-mounted Advisor control panel
    • Interconnect harness
  • Lubrication System
    • Crankcase breather — top mounted
    • Oil cooler
    • Oil filter — RH
    • Oil pan — shallow
    • Oil sampling valve
    • Turbo oil accumulator
  • Mounting System
    • Rails
  • Protection System
    • Electronic shutoff system
    • Gas shutoff valve
  • General
    • Paint — Cat yellow
    • Crankshaft vibration damper and guard
  • Power Take Offs
    • Front lower LH accessory drive
    • Front housing, two sided
  • Air Inlet System
    • Remote air inlet adapters
    • Rain Shield
  • Charging System
    • CSA Alternator (24V, 65A)
  • Exhaust System
    • Flexible fittings
    • Elbows
    • Flange
    • Mufflers
  • Fuel System
    • Fuel filter
  • Lubrication System
    • Oil bypass filter
    • Deep sump oil pan
    • Air prelube pump
    • Lubricating oil
    • Oil pan drain
  • Power Take-Offs
    • Front stub shaft
  • Protection System
    • Explosion relief valves, status control box interconnect wiring harness
  • Starting System
    • 90 psi starter
    • 150 psi starter
  • EU Certification
    • EEC DOI certification
Mulchers: HM215 High Flow Mulcher
Mulchers: HM210 Mulcher
Mulchers: HM208 Mulcher
Mulchers: HM115 Standard Flow Mulcher
Material Handling: 4137 mm (163 in) Material Handling Arm, Fusion
Mulchers: HM112 Standard Flow Mulcher
Material Handling: 4585mm (180in) Mat’l handing Arm, Fusion™
Material Handling: 4121mm (162in) Mat’l Handling Arm, Fusion™
Material Handling: 3941 mm (155 in) Material Handling Arms – Loader
Material Handling: Material Handling Arm For Compact Products
Hammers: H190 S Hydraulic Hammer
Hammers: H215 S Hydraulic Hammer
Hammers: H160 S Hydraulic Hammer
Hammers: H180 S Hydraulic Hammer
Hammers: H140 S Hydraulic Hammer
Hammers: H120 S Hydraulic Hammer
Hammers: H130 S Hydraulic Hammer
Hammers: H115 S Hammer
GC Hammers: H180 GC S Hammer
GC Hammers: H130 GC S Hammer
GC Hammers: H160 GC S Hammer