New Cat?� 3606 Industrial Diesel Engine for Sale

Cat^?� 3606 Industrial Diesel Engine

Minimum Power

1998.0 bhp
Maximum Power

2481 HP
Maximum Power

2481 hp
Maximum Power

2481.0 bhp

Power Rating

Minimum Power: 1998.0 bhp
Maximum Power: 2481 HP
Maximum Power: 2481 hp
Maximum Power: 2481.0 bhp
Maximum Torque: 13424 lb-ft @ 820 rpm
Rated Speed: 750-1000 rpm
Rated Speed: 750-1000 rpm
Minimum Power: 1998 HP
Minimum Power: 1998 hp
Rated Speed: 750-1000 rpm

Emission Standards

Emissions: Non-certified
Emissions: Non-Certified
Emissions: Non-Certified

General

Engine Configuration: Inline 6, 4-Stroke-Cycle Diesel
Engine Configuration: Inline 6, 4-Stroke-Cycle Diesel
Engine Configuration: Inline 6, 4-Stroke-Cycle Diesel
Bore: 280 mm (11 in)
Bore: 280 mm (11 in)
Bore: 11 in
Bore: 11 in
Stroke: 11.8 in
Stroke: 11.8 in
Stroke: 300 mm (11.8 in)
Stroke: 300 mm (11.8 in)
Displacement: 6764 in³
Displacement: 6764 in³
Displacement: 110.8 L (6764 in³)
Aspiration: Turbocharged Aftercooled
Displacement: 110.8 L (6764 in³)
Compression Ratio: 13:01
Compression Ratio: 13:01
Compression Ratio: 13:1
Aspiration: Turbocharged Aftercooled
Aspiration: Turbocharged Aftercooled
Rotation: Counterclockwise
Rotation from Flywheel End: Counterclockwise
Rotation from Flywheel End: Counterclockwise
Aftertreatment: -
Aftertreatment: -

Engine Dimensions - Approximate

Length: 157 in
Length: 157 in
Width: 69 in
Width: 69 in
Height: 103 in
Height: 103 in
Weight: 34500 lb
Weight: 34500 lb
Height: 2626 mm (103 in)
Length: 3988 mm (157 in)
Weight: 15,680 kg (34,500 lb)
Width: 1748 mm (69 in)

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Length: 3988 mm (157 in)
Width: 1748 mm (69 in)
Height: 2626 mm (103 in)
Weight: 15,680 kg (34,500 lb)

Air Inlet System
- Aftercooler core, corrosion resistant coated (air side)
- Air cleaner. Regular duty, dry, panel type with service indicators, turbocharger, jacket water aftercooled.
- Turbocharger, rear mounted
- Jacket water aftercooled
Control System
- Governor, RH, 3161 with self contained synthetic oil sump
- Air-fuel ratio control
- Mechanical speed control, without torque control
- Governor control
- Positive locking
Cooling System
- Thermostats and housing
- Jacket water pump, centrifugal
Exhaust System
- Exhaust manifold, dry
Flywheels and Flywheel Housing
- SAE No. 00 flywheel
- 183 flywheel teeth
- SAE No. 00 flywheel housing
Fuel System
- Fuel filter, with service indicators, cartridge type with RH service
- Fuel transfer pump
Instrumentation
- Instrument Panel, RH
- Engine oil pressure gauge
- Fuel pressure gauge
- Oil filter differential gauge
- Jacket water temperature gauge
- Service meter, electric
- Tachometer
Lube System
- Crankcase breather, top mounted
- Oil cooler
- Oil filler
- Oil dipstick
- Oil pump
- Oil filter, cartridge type with RH service
- Shallow oil pan
Mounting System
- Rails, mounting, engine length, 254 mm (10 in), industrial-type, C-channel.
Power Take Off
- Accessory drive, upper RH
- Front housing, single sided
Protection System
- Junction box
- Manual shutoff, RH
- Safety shutoff protection, energized to shutdown
- Low oil pressure, low idle 69 kPa (10 psi); high idle 207 kPa (30 psi)
- Water temperature
- Overspeed
- 3161 governor solenoid energized to shutdown
Starting System
- Starting switch
General
- Vibration damper
- Lifting eyes
- Paint: Caterpillar yellow, with optional colors available at request