Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Industrial

Cat?� C0.7 Diesel Engine

  • Minimum Power
    16.4 bhp
  • Maximum Power
    20.5 HP
  • Maximum Power
    20.5 hp
  • Maximum Power
    20.5 bhp
Power Rating
Minimum Power
16.4 bhp
Maximum Power
20.5 HP
Maximum Power
20.5 hp
Maximum Power
20.5 bhp
Maximum Torque
33 lb-ft @ 2200 rpm
Maximum Torque
37.1 lb-ft @ 2400 rpm
Rated Speed
2800-3600 rpm
Rated Speed
2800-3600 rpm
Minimum Power
16.4 HP
Minimum Power
16.4 hp
Rated Speed
2800-3600 rpm
Emission Standards
Emissions
U.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards.
Emissions
U.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards.
Emissions
U.S. EPA Tier 4 Interim Equivalent
General
Engine Configuration
Inline 3, 4-Stroke-Cycle Diesel
Engine Configuration
Inline 3, 4-Stroke-Cycle Diesel
Engine Configuration
Inline 3, 4-Stroke-Cycle Diesel
Bore
67 mm (2.64 in)
Bore
67 mm (2.6 in)
Bore
2.6 in
Bore
2.6 in
Stroke
2.8 in
Stroke
2.8 in
Stroke
72 mm (2.83 in)
Stroke
72 mm (2.8 in)
Displacement
46.4 in³
Displacement
46.4 in³
Displacement
.762 L (46.5 in³)
Aspiration
Naturally Aspirated (NA)
Displacement
0.762 L (46.4 in³)
Compression Ratio
23.5:1
Compression Ratio
23.5:1
Compression Ratio
23.5:1
Aspiration
Naturally Aspirated (NA)
Aspiration
Naturally Aspirated (NA)
Combustion System
Indirect Injection
Combustion System
Indirect Injection
Combustion System
Indirect Injection
Rotation
Counterclockwise
Rotation from Flywheel End
Counterclockwise
Rotation from Flywheel End
Counterclockwise
Aftertreatment
-
Aftertreatment
-
Lube System
2.35-3.05 L (2.48-3.22 qt)
Lube System
2.35-3.05 L (2.48-3.22 qt)
Engine Dimensions - Approximate
Length
18.9 in
Length
18.9 in
Width
14.6 in
Width
14.6 in
Height
20.8 in
Height
20.8 in
Weight
156.5 lb
Weight
156.5 lb
Height
528 mm (20.8 in)
Length
480 mm (18.9 in)
Weight
71 kg (156.5 lb)
Width
371 mm (14.6 in)
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
Length
480 mm (18.9 in)
Width
371 mm (14.6 in)
Height
528 mm (20.8 in)
Weight
71 kg (156.5 lb)
  • Air Inlet
    • Inlet manifold with choice of inlets.
  • Control System
    • Alternator 12 volt 14 amp
    • Starter motor 12 volt
    • Glow plug starting aid
  • Cooling System
    • Belt-driven coolant pump
    • Coolant temperature switch
    • Choice of cooling fans
  • Flywheel and Flywheel Housing
    • SAE No. 6 1/2 flywheel
    • Choice of SAE No. 5 or standard backplate flywheel housing
  • Fuel System
    • Fuel injection pump
    • Spin-on fuel filter
    • Electronic Shut-off Solenoid (ESOS)
  • Lube System
    • Closed circuit breather
    • Spin-on lube oil filter
    • Lube oil pressure switch
    • Lube oil sump
  • General
    • Cast iron, engine block
    • Cast iron exhaust manifold--side outlet
    • Cold start capability to -20° C (-4° F)
    • Gradeability 35° continuous
    • Paint: Caterpillar yellow, with optional colors available at request