New Cat® C13 Diesel Engine for Sale

Cat® C13 Diesel Engine

Maximum Power

520 HP
Maximum Torque

1756 lb-ft @ 1400 rpm
Rated Speed

1800-2100 rpm
Minimum Power

385 HP

Power Rating

Maximum Power: 520 HP
Maximum Torque: 1756 lb-ft @ 1400 rpm
Rated Speed: 1800-2100 rpm
Minimum Power: 385 HP

Emission Standards

Emissions: U.S. EPA Tier 4 Final

General

Engine Configuration: In-Line 6, 4-Stroke-Cycle Diesel
Engine Configuration: In-Line 6
Bore: 5.1 in
Stroke: 6.2 in
Displacement: 762.8 in³
Compression Ratio: 17.0:1
Aspiration: Turbocharged-Aftercooled (TA)
Combustion System: Direct Injection
Rotation from Flywheel End: Counterclockwise
Aftertreatment: DOC+DPF+SCR
Cooling System Capacity: 18.7 L (19.8 qt)
Lube System: 34 L (35.9 qt)

Engine Dimensions - Approximate

Length: 50 in
Width: 39 in
Height: 45 in
Weight: 2520 lb

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Length: 1203-1272 mm (47.2-50.1 in)
Width: 933-996 mm (36.74-39.2 in)
Height: 1132-1186 mm (44.6-46.7 in)
Weight: 1143-1350 kg (2520-2976 lb)

Aftertreatment Dimensions

Length: 42 in
Width: 41 in
Height: 26 in
Weight: 571 lb

Cat Regeneration System Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

Length: 1053-1077 mm (41.5-42.4 in)
Width: 779.8-1069 mm (30.7-42.1 in)
Height: 451.3-654 mm (17.8-25.7 in)
Weight: 248-259 kg (547-571 lb)
Diameter: 330.2 mm (13 in)

Cat Regeneration System Aftertreatment Dimensions - Approximate

Width: 779.8-1069 mm (30.7-42.1 in)
Height: 451.3-654 mm (17.8-25.7 in)
Length: 1053-1077 mm (41.5-42.4 in)
Diameter: 330.2 mm (13 in)
Weight: 248-259 kg (547-571 lb)

PETU Dimensions - Tier 4 Final Only

Length: 33.6 in
Width: 11.3 in
Height: 21.7 in
Weight: 42.8 lb
Volume Capacity: 51.1 qt (US)

PETU Dimensions (Tier 4 Final, Stage IV Only)

Length: 854 mm (33.6 in)
Width: 287 mm (11.3 in)
Volume Capacity: 48.4 L (51.1 qt)
Weight: 19.42 kg (42.8 lb)
Height: 551 mm (21.7 in)

PETU Dimensions - Tier 4 Final, Stage IV Only

Width: 287 mm (11.3 in)
Weight: 19.42 kg (42.8 lb)
Length: 854 mm (33.6 in)
Volume Capacity: 48.4 L (51.1 qt)
Height: 551 mm (21.7 in)

Passive Regeneration System Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

Length: 974.8 mm (38.4 in)
Width: 958.3 mm (37.7 in)
Height: 547.2 mm (21.5 in)
Weight: 140 kg (308.6 lb)

Passive Regeneration System Aftertreatment Dimensions - Approximate

Weight: 140 kg (308.6 lb)
Length: 974.8 mm (38.4 in)
Width: 958.3 mm (37.7 in)
Height: 547.2 mm (21.5 in)

Air Inlet System
- Turbocharged
- Air-to-Air Aftercooled
- Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)
Control System
- Electronic control system
- Over-foam wiring harness
- Automatic altitude compensation
- Power compensated for fuel temperature
- Configurable software features
- Engine monitoring system SAE J1939 broadcast and control
- Integrated Electronic Control Unit (ECU)
- Remote fan control
Cooling System
- Vertical or RH thermostat outlet
- Centrifugal water pump
- Guidance on cooling system design available through your dealer to ensure equipment reliability
Flywheels and Flywheel Housing
- SAE No. 1 flywheel housing
- Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV).
Fuel System
- MEUI injection
- Primary fuel filter
- Secondary fuel filters
- Fuel transfer pump
- Electronic fuel priming
Lube System
- Open crankcase ventilation system
- Oil cooler
- Oil filler
- Lube oil filter
- Oil dipstick
- Gear driven oil pump
- Choice of front, rear or center sumps
- Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV)
Power Take Off (PTO)
- SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
General
- Paint: Caterpillar yellow, with optional colors available at request
U.S. EPA Tier 4 Interim, EU Stage IIIB Aftertreatment / Clean Emissions Control Equipment
- Cat Regeneration System
- Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
- NOx Reduction System (NRS)
- Flex pipe connection kit with 90° rotatable elbows to attach to Cat Regeneration System Inlet
- Available in 12 volt or 24 volt systems
U.S. EPA Tier 4 Final, EU Stage IV Aftertreatment
- Cat Regeneration System
- Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
- Aftertreatment Electronic Control Unit (ECU)
- NOx Reduction System (NRS)
- Pump Electronic Control Unit (PETU)
- Selective Catalytic Reduction (SCR)
- Available in 12V or 24V systems