Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Industrial

Cat?� C18 Industrial Diesel Engine

  • Minimum Power
    575.0 bhp
  • Maximum Power
    800 HP
  • Maximum Power
    800 hp
  • Maximum Power
    800.0 bhp
Power Rating
Minimum Power
575.0 bhp
Maximum Power
800 HP
Maximum Power
800 hp
Maximum Power
800.0 bhp
Maximum Torque
2696 lb-ft @ 1400 rpm
Maximum Torque
2696 lb-ft @ 1400 rpm
Rated Speed
1800-2100 rpm
Rated Speed
1800-2100 rpm
Minimum Power
575 HP
Minimum Power
575 hp
Rated Speed
1800-2100 rpm
Emission Standards
Emissions
China Nonroad III, U.S. EPA Tier 3 equivalent or U.S. EPA Tier 2 equivalent, EU Stage IIIA equivalent, or Non-certified
Emissions
China Nonroad III, U.S. EPA Tier 3 equivalent or U.S. EPA Tier 2 equivalent, EU Stage IIIA equivalent, or Non-certified
Emissions
China Nonroad III, U.S. EPA Tier 3 equivalent or U.S. EPA Tier 2 equivalent, EU Stage IIIA equivalent, or Non-certified
General
Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Bore
145 mm (5.71 in)
Bore
145 mm (5.71 in)
Bore
5.7 in
Bore
5.7 in
Stroke
7.2 in
Stroke
7.2 in
Stroke
183 mm (7.2 in)
Stroke
183 mm (7.2 in)
Displacement
1104.5 in³
Displacement
1104.5 in³
Displacement
18.1 L (1104.5 in³)
Aspiration
Turbocharged Aftercooled (TA)
Displacement
18.1 L (1104.5 in³)
Compression Ratio
16.3:1
Compression Ratio
16.3:1
Compression Ratio
16.3:1
Aspiration
Turbocharged Aftercooled (TA)
Aspiration
Turbocharged Aftercooled (TA)
Combustion System
Direct Injection
Combustion System
Direct Injection
Combustion System
Direct Injection
Rotation
Counterclockwise
Rotation from Flywheel End
Counterclockwise
Rotation from Flywheel End
Counterclockwise
Aftertreatment
-
Aftertreatment
-
Engine Dimensions - Approximate
Length
55.7 in
Length
55.7 in
Width
38.3 in
Width
38.3 in
Height
49.5 in
Height
49.5 in
Weight
3688 lb
Weight
3688 lb
Height
1243-1257 mm (48.9-49.5 in)
Length
1388.2-1414 mm (54.6-55.7 in)
Weight
1673 kg (3688 lb)
Width
921-974 mm (36.3-38.3 in)
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
Length
1388.2-1414 mm (54.6-55.7 in)
Width
921-974 mm (36.3-38.3 in)
Height
1243-1257 mm (48.9-49.5 in)
Weight
1673 kg (3688 lb)
  • Air Inlet System
    • Turbocharged Aftercooled (429-470 bkW, 575-630 bhp)
    • Twin Turbocharged Aftercooled (522-597 bkW, 700-800 bhp)
    • Air-to-Air Aftercooled
  • Charging System
    • Charging alternator 24 volt, 50 amp
  • Control System
    • Electronic governing, PTO speed control
    • Programmable ratings
    • Automatic altitude compensation
    • Power compensation for fuel temperature
    • Programmable low and high idle and total engine limit
    • Electronic diagnostics and fault logging
    • Engine monitoring system SAE J1939 broadcast and control
    • ADEM A4 Electronic Control Unit (ECU)
  • Cooling System
    • Thermostats and housing, vertical outlet
    • Jacket water pump, centrifugal
    • Water pump, inlet
  • Exhaust System
    • Exhaust manifold, dry
    • Optional exhaust outlet
  • Flywheels and Flywheel Housing
    • SAE No. 1 or SAE No. 0 flywheel housing
  • Fuel System
    • MEUI injection
    • Fuel filter, secondary (2 micron)
    • Fuel filter, tertiary (2 micron)
    • ACERT Technology
    • Fuel transfer pump
    • Fuel priming pump
  • Lube System
    • Crankcase breather
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Front sump oil pan
    • Oil dipstick
    • Gear driven oil pump
  • General
    • Vibration damper
    • Lifting eyes
    • Cold start capability to -20° C (-4° F)
    • Paint: Caterpillar yellow, with optional colors available at request