Industrial
Cat® C32 Industrial Power Unit
-
Maximum Power1000 HP
-
Maximum Torque3825 lb-ft @ 1200 rpm
-
Rated Speed1800 rpm
-
Minimum Power1000 HP
Power Rating
- Maximum Power
- 1000 HP
- Maximum Torque
- 3825 lb-ft @ 1200 rpm
- Rated Speed
- 1800 rpm
- Minimum Power
- 1000 HP
Emission Standards
- Emissions
- U.S. EPA Tier 4 Final and EU Stage V
General
- Engine Configuration
- V-12
- Cycle
- 4
- Bore
- 5.7 in
- Stroke
- 6.4 in
- Displacement
- 1958.9 in³
- Compression Ratio
- 16.0:1
- Aspiration
- Twin Turbocharged Aftercooled (TTA)
- Combustion System
- Direct Injection
- Cooling System
- liquid
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- DOC
Power Unit Dimensions
- Height
- 77.6 in
- Length
- 100.7 in
- Width
- 64.4 in
-
Air Inlet System
- Turbocharged
- Air-to-Air Aftercooled
-
Control System
- Electronic control system
- Over-foam wiring harness
- Automatic altitude compensation
- Power compensated for fuel temperature
- Configurable software features
- Engine monitoring system SAE J1939 broadcast and control
-
Cooling System
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
-
Exhaust System
- Exhaust manifold, dry
- Optional exhaust outlet
-
Flywheels and Flywheel Housing
- Choice of SAE No. 0 or SAE No. 1 flywheel housing
-
Fuel System
- MEUI injection
- Fuel filter, secondary (2 micron)
- Electronic fuel priming
-
Lube System
- Open crankcase ventilation system
- Oil cooler
- Oil filler
- Lube oil filter
- Rear sump oil pan
- Oil dipstick
- Gear driven oil pump