Industrial
Cat® C32
-
Minimum Power950.0 bhp
-
Maximum Power1350 HP
-
Maximum Power1350 HP
-
Maximum Power1350.0 bhp
Power Rating
- Minimum Power
- 950.0 bhp
- Maximum Power
- 1350 HP
- Maximum Power
- 1350 HP
- Maximum Power
- 1350.0 bhp
- Maximum Torque
- 4548 lb-ft @ 1400 rpm
- Maximum Torque
- 4548 lb-ft @ 1400 rpm
- Rated Speed
- 1800-2100 rpm
- Rated Speed
- 1800-2100 rpm
- Minimum Power
- 950 HP
- Minimum Power
- 950 HP
- Rated Speed
- 1800-2100 rpm
Emission Standards
- Emissions
- U.S. EPA Tier 2 Equivalent
- Emissions
- U.S. EPA Tier 2 Equivalent
- Emissions
- U.S. EPA Tier 2 Equivalent
General
- Engine Configuration
- V-12, 4-Stroke-Cycle Diesel
- Engine Configuration
- V-12, 4-Stroke-Cycle Diesel
- Engine Configuration
- V-12, 4-Stroke-Cycle Diesel
- Bore
- 145 mm (5.71 in)
- Bore
- 145 mm (5.71 in)
- Bore
- 5.7 in
- Bore
- 5.7 in
- Stroke
- 6.4 in
- Stroke
- 6.4 in
- Stroke
- 162 mm (6.38 in)
- Stroke
- 162 mm (6.38 in)
- Displacement
- 1958.9 in³
- Displacement
- 1958.9 in³
- Displacement
- 32.1 L (1958.9 in³)
- Aspiration
- Turbocharged Aftercooled (TA)
- Displacement
- 32.1 L (1958.9 in³)
- Compression Ratio
- 16.5:1
- Compression Ratio
- 16.5:1
- Compression Ratio
- 16.5:1
- Aspiration
- Turbocharged Aftercooled (TA)
- Aspiration
- Turbocharged Aftercooled (TA)
- Combustion System
- Direct Injection
- Combustion System
- Direct Injection
- Combustion System
- Direct Injection
- Rotation
- Counterclockwise
- Rotation from Flywheel End
- Counterclockwise
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- -
- Aftertreatment
- -
Engine Dimensions - Approximate
- Length
- 75.5 in
- Length
- 75.5 in
- Width
- 58.2 in
- Width
- 58.2 in
- Height
- 51.9 in
- Height
- 51.9 in
- Weight
- 6495 lb
- Weight
- 6495 lb
- Height
- 1319 mm (51.9 in)
- Length
- 1917 mm (75.5 in)
- Weight
- 2946 kg (6495 lb)
- Width
- 1479 mm (58.2 in)
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
- Length
- 1917 mm (75.5 in)
- Width
- 1479 mm (58.2 in)
- Height
- 1319 mm (51.9 in)
- Weight
- 2946 kg (6495 lb)
-
Air Inlet System
- Twin Turbocharged Aftercooled
- Air-to-Air Aftercooled
-
Control System
- Electronic governing, PTO speed control
- Programmable ratings
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and total engine limit
- Electronic diagnostics and fault logging
- Engine monitoring system SAE J1939 broadcast and control
- ADEM™ A4 Electronic Control Unit (ECU)
-
Cooling System
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
-
Exhaust System
- Exhaust manifold, dry
- Optional exhaust outlet
-
Flywheels and Flywheel Housing
- SAE No. 1 flywheel housing
-
Fuel System
- MEUI injection
- Fuel filter, secondary (2 micron)
- ACERT™ Technology
- Fuel transfer pump
- Fuel priming pump
-
Lube System
- Crankcase breather
- Oil cooler
- Oil filler
- Lube oil filter
- Front sump oil pan
- Oil dipstick
- Gear driven oil pump
-
General
- Vibration damper
- Lifting eyes
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request