Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Industrial

Cat® C9.3B Industrial Power Unit

  • Maximum Power
    416 HP
  • Rated Speed
    1800-2200 rpm
  • Minimum Power
    308 HP
  • Emissions
    Brazil MAR-1, UN R96 Stage IIIA
Power Rating
Maximum Power
416 HP
Rated Speed
1800-2200 rpm
Minimum Power
308 HP
Emission Standards
Emissions
Brazil MAR-1, UN R96 Stage IIIA
General
Engine Configuration
Inline 6, 4-Stroke-Cycle-Diesel
Bore
4.5 in
Stroke
5.9 in
Displacement
567.5 in³
Compression Ratio
16.5:1
Aspiration
Turbocharged Aftercooled (TA)
Rotation from Flywheel End
Counterclockwise
Power Unit Dimensions
Length
83 in
Width
43 in
Height
63 in
Weight
3265 lb
  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
    • Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)
  • Control System
    • Electronic control system
    • Over-foam wiring harness
    • Automatic altitude compensation
    • Power compensated for fuel temperature
    • Configurable software features
    • Engine monitoring system SAE J1939 broadcast and control
    • Integrated Electronic Control Unit (ECU)
    • Remote fan control
  • Cooling System
    • Vertical or RH thermostat outlet
    • Centrifugal water pump
    • Guidance on cooling system design available through your dealer to ensure equipment reliability
  • Flywheels and Flywheel Housing
    • Dual rear PTO configuration
    • Available SAE No. 1 power take off with optional SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments.
  • Fuel System
    • Electronic high pressure common rail
    • Primary fuel filter
    • Secondary fuel filters
    • Fuel transfer pump
    • Electronic fuel priming
  • Lube System
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Oil dipstick
    • Gear driven oil pump
    • Choice of front, rear or center sumps
  • Power Take Off (PTO)
    • SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
  • General
    • Vibration damper
    • Lifting eyes