Industrial
Cat® C9 Industrial Power Unit
-
Maximum Power350 HP
-
Maximum Power350 hp
-
Rated Speed1800-2200 rpm
-
Rated Speed1800-2200 rpm
Power Rating
- Maximum Power
- 350 HP
- Maximum Power
- 350 hp
- Rated Speed
- 1800-2200 rpm
- Rated Speed
- 1800-2200 rpm
- Minimum Power
- 275 HP
- Minimum Power
- 275 hp
Emission Standards
- Emissions
- China Stage II, U.S. EPA Tier 2 Equivalent or U.S. EPA Tier 3 Equivalent, EU Stage II Equivalent or EU Stage IIIA Equivalent
- Emissions
- China Stage II, U.S. EPA Tier 2 Equivalent or U.S. EPA Tier 3 Equivalent, EU Stage II Equivalent or EU Stage IIIA Equivalent
General
- Engine Configuration
- Inline 6, 4-Stroke-Cycle Diesel
- Engine Configuration
- Inline 6, 4-Stroke-Cycle Diesel
- Bore
- 4.4 in
- Bore
- 4.4 in
- Stroke
- 5.9 in
- Stroke
- 5.9 in
- Displacement
- 537 in³
- Displacement
- 537 in³
- Compression Ratio
- 16.3:1
- Compression Ratio
- 16.3:1
- Aspiration
- Turbocharged Aftercooled (TA)
- Aspiration
- Turbocharged Aftercooled (TA)
- Rotation from Flywheel End
- Counterclockwise
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- -
- Aftertreatment
- -
Power Unit Dimensions
- Width
- 38.9 in
- Width
- 38.9 in
- Weight
- 3285 lb
- Weight
- 3285 lb
Power Unit Dimensions - Approximate
- Weight
- 1490 kg (3285 lb)
- Height
- 2008.1 mm (79.06 in)
- Width
- 987.8 mm (38.89 in)
- Length
- 2174.4 mm (85.81 in)
-
Air Inlet System
- Turbocharged
- Air-to-Air Aftercooled
-
Control System
- Electronic governing, PTO speed control
- Programmable ratings
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and total engine limit
- Electronic diagnostics and fault logging
- Engine monitoring system SAE J1939 broadcast and control
- ADEM™ A4 Electronic Control Unit (ECU)
-
Cooling System
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
-
Exhaust System
- Exhaust manifold, dry
- Optional exhaust outlet
-
Flywheels and Flywheel Housing
- SAE No. 1 flywheel housing
-
Fuel System
- HEUI™ injection
- Fuel filter, secondary (2 micron)
- ACERT™ Technology
- Fuel transfer pump
- Fuel priming pump
-
Lube System
- Crankcase breather
- Oil cooler
- Oil filler
- Lube oil filter
- Front sump oil pan
- Oil dipstick
- Gear driven oil pump
-
General
- Vibration damper
- Lifting eyes
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request