New 3512E Tier 4 Land Electric Drive Drilling Engine for Sale

3512E Tier 4 Land Electric Drive Drilling Engine

Maximum Rating

1750 BHP
Displacement

3596 in³
Minimum Rating

1476 BHP
Stroke

8.5 in

General Specifications

Maximum Rating: 1750 BHP
Displacement: 3596 in³
Minimum Rating: 1476 BHP
Stroke: 8.5 in
Bore: 6.7 in
Flywheel and Flywheel Housing: SAE No. 00
Aspiration: Turbocharged-Aftercooled

Emissions

Emissions: U.S. EPA/CARB Tier 4 Final

Dimensions

Length: 130 in
Width: 72 in
Height: 78 in
Weight: 16595 lb

Aftertreatment Mounting
- 1 CEM shipped loose
- Requires customer support structure & mounting
Air Inlet System
- Aftercooler core, corrosion resistant
- Air cleaner, regular duty, dual element, no pre-cleaner
- Service indicators
Control System
- Cat ADEM A5 ECU – LH
Cooling System
- Outlet controlled thermostat and housing
- Jacket water pump, gear driven
- Aftercooler fresh water cooling pump (SCAC), gear driven centrifugal
- Remote radiator cooling - single water outlet
- 141.5 mm I.D. (5.6 in), hose type connection
Exhaust System
- Exhaust manifolds, dry
- Dual turbochargers with w/c bearings
- Exhaust dual turbine outlet
- All engines shipped with flex pipe kit
Flywheels & Flywheel Housing
- Flywheel & Flywheel housing, SAE No. 00
- SAE Standard rotation
Fuel System
- Low pressure fuel transfer pump
- High pressure common rail fuel system
- Electronically controlled unit injectors with individual fuel accumulators
- Electric fuel priming pump with fuel/water separator
- High pressure fuel pump with fuel control valve
- Boosted primary fuel filters with fuel/water separator, shipped loose
Instrumentation
- EMCP 4.4, shipped loose
- Product Link^™ engine monitoring
Lube System
- Crankcase breather
- Oil cooler
- Oil pan drain valve – 2" NPT female connection
- Shallow oil pan
- Spin on oil filter - RH
- Shipped dry
Mounting System
- Rails, mounting, floor type, 254 mm (10 in)
- Power Take-Offs
- Accessory drive
- Lower LH front (available for PTO usage)
- Front housing, two-sided
Protection System
- ADEM A5 ECM system to provide customer programmable engine deration strategies to protect against adverse operating conditions. Includes single slide gate air inlet shutoff, activated on overspeed or emergency stop
Starting System
- Prelube integrated starting system: - Air starting motor, RH, 620-1034 kPa (90-150 psi), LH - Integrated air silencer - Air prelube motor, RH
General
- Paint - Cat yellow
- Vibration damper and guard
- Lifting eyes

Air Inlet System
- Heavy-duty air cleaners (dual element with precleaners)
Charging System
- 80 amp charging alternator
Cooling System
- Caterpillar supplied radiator, 46/CVS-stacked, includes blower fan, fan drive, pulley, belt guard, regulator, fuel cooler
- Single water outlet connection (for use with customer supplied radiator)
- Coolant level sensor
- Coolant conditioner
Exhaust System
- Flex pipe kit
- Residential mufflers (painted steel and stainless steel) with outlet elbow and rain cap
Instrumentation
- Product Link
Lube System
- Closed crankcase ventilation
- Centrifugal oil filter
- Oil level regulator
Protection System
- Explosion relief valve
- Metal particle detector
General
- Coupling hub
- Barring group
- Jacket water heater 240-480 V
- Direct Rack 0-200 ma