New 3512C Land Electric-Drive Drilling Module for Sale

3512C Land Electric-Drive Drilling Module

Minimum Rating

1045.0 ekW
Minimum Rating

1045 ekW
Maximum Rating

1045.0 ekW
Maximum Rating

1045 ekW

Engine Specifications

Minimum Rating: 1045.0 ekW
Minimum Rating: 1045 ekW
Maximum Rating: 1045.0 ekW
Maximum Rating: 1045 ekW
Emissions: U.S. EPA Nonroad Tier 2
Emissions: U.S. EPA Nonroad Tier 2
Engine Control and Protection: ADEM A3
Generator: SR4B
Aspiration: Turbocharged-Aftercooled
Bore: 6.69 in
Stroke: 7.48 in
Displacement: 3158.0 in3
Fuel System: EUI
Oil Change Interval: 500.0 hr
Weight: 31864.0 lb
Generator Set Control: EMCP 4.3
Voltage: 600
Aspiration: Turbocharged-Aftercooled
Bore: 6.69 in
Displacement: 3158 in³
Engine Control and Protection: ADEM A3
Fuel System: EUI
Generator: SR4B
Generator Set Control: EMCP 4.3
Oil Change Interval: 500 h
Stroke: 7.48 in
Weight: 31864 lb

Dimensions

Width: 91.2 in
Length: 238.2 in
Height: 104.7 in
Height: 104.7 in
Length: 238.2 in
Width: 91.2 in

Capacity for Liquids

Lube Oil System: 84.0 gal
Cooling System: 41.0 gal
Cooling System: 41 gal (US)
Lube Oil System: 84 gal (US)

Air Inlet System
- Corrosion-resistant aftercooler core
- Air Inlet shutoff
- Regular duty air cleaner
Control System
- ADEM A3 ECU, left-hand mounted
- Direct rack control 0-200 mADC, space heater and jacket water heater connection and controls
Cooling System
- Caterpillar supplied radiator, 46/CVS-stacked 0.627 ratio, includes blower fan, fan drive, pulley, belt guard, coolant level sensor, regulator, and fuel cooler
- Separate-circuit aftercooled
- Outlet controlled jacket water thermostat
- Jacket water pump - gear driven
- Dual outlet
- Aftercooler water pump - gear driven
- Aftercooler water thermostat
Exhaust System
- Dry exhaust manifold
- Dual turbochargers, water cooled bearings
Flywheel and Housing
- SAE No. 00 flywheel
- SAE No. 00 flywheel housing
- SAE standard rotation
Fuel System
- Fuel filter simplex (LH) with priming pump (LH)
- Fuel transfer pump
- Fuel return line with flexible connection
- Electronic unit injectors
Generator Attachments
- Barrel-mounted petroleum terminal box with air filter and pressure differential switch
Instrumentation
- Emergency stop button
- Analog gauges:
- Service port connector
- Customer connection terminal blocks
EMCP 4.3 Control Panel
- 140 mm (5.5 in) Graphical Display
- Communication
- Controls
- Generator Set Protection
- Outputs
- Inputs
- Other Features
Lubrication System
- Crankcase breather
- Oil cooler
- Shallow oil pan
- Oil drain extension, 2 in NPT female connection
- Simplex oil filter
Mounting System
- 4.19 m (165 in) length, 412 mm (16.2 in) height tubes, 1.18 m (50.5 in) wide
Protection System
- Engine alarms, derate, and shutdown in abnormal operation
Starting System
- TDI air starting motor, RH - 1034 kPa (150 psi)
General
- Paint - Cat yellow

Air Inlet System
- Heavy duty air cleaner
- Remote air inlet adapter - rectangular
- Remote air inlet adapter - round
Control System
- Engine control options:
- Load sharing governor, 2301A
Cooling System
- Radiator options:
- Coolant level sensor
- Coolant conditioner
- Cooling system connection options (for use with customer-supplied radiator):
- Fan drive and belt guard (for use with remote and customersupplied radiators)
- Fan pulley options (for use with customer-supplied radiator):
Exhaust System
- Exhaust expander 297 mm to 340 mm (11.7 in to 13.4 in)
- Flexible fitting, 356 mm (14 in)
- Elbow, 305 mm (12 in)
- Muffler, 356 mm (14 in), spark arresting, includes companion flanges, clean-out box, and spark box
- Muffler, 305 mm (12 in), spark arresting, includes companion flanges, clean-out box, and spark box
Fuel System
- Custom fuel filter
- Primary fuel filter
- Primary fuel filter with water separator
Generator Attachments
- Barrel-mounted petroleum terminal box
- Current transformers (3)
- Cable access box
Instrumentation
- Communications module PL1000T
- Communications module PL1000E
- Thermocouples installed, one per cylinder
Lubrication System
- Custom oil filter
- RH installed centrifugal oil filter
- SAE15W40, Caterpillar DEO, 500 hour
- Crankcase fumes disposal
- Oil level regulator
Mounting System
- Custom inner base
- Custom outer base
- Package isolator supports (3), for mounting inner base to customer-supplied base
Power Take-off
- Alternator, 24V, 68A
Protection System
- Explosion relief valves (3)
- Metal particle detector switch
- Metal particle detector with annunciator
Starting System
- Custom starting motor
- Air pressure regulator
General
- LH installed engine barring group
- Jacket water heater, UL recognized, 120-240V, single phase, 6 kW, LH and RH mounted
- Jacket water heater, UL recognized, 120-480V, single phase, 12 kW, LH and RH mounted
- Jacket water heater lines