Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Land Mechanical Engines

C15 ACERT Tier 4 Interim / EU Stage IIIB

  • Minimum Rating
    475.0 bhp
  • Minimum Rating
    475 BHP
  • Maximum Rating
    580.0 bhp
  • Maximum Rating
    580 BHP
Engine Specifications
Minimum Rating
475.0 bhp
Minimum Rating
475 BHP
Maximum Rating
580.0 bhp
Maximum Rating
580 BHP
Emissions
U.S. EPA Tier 4 Interim, EU Stage IIIB
Emissions
U.S. EPA Tier 4 Interim, EU Stage IIIB
Rated Speed
2100.0 RPM
Rated Speed
2100 r/min
Bore
5.4 in
Bore
5.4 in
Stroke
6.7 in
Stroke
6.7 in
Displacement
928.0 in3
Displacement
928 in³
Aspiration
Turbocharged-Aftercooled
Aspiration
Turbocharged-Aftercooled
Governor and Protection
ADEM A4
Engine Weight
2976.0 lb
Engine Weight
2976 lb
Oil Change Interval
250 - 500
Rotation
Counterclockwise
Oil Change Interval
250 - 500
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 1
Flywheel and Flywheel Housing
SAE No. 1
Flywheel Teeth
113
Flywheel Teeth
113
Capacity for Liquids
Minimum Cooling System
5 gal (US)
Dimensions
Length
47.4 in
Length
47.4 in
Width
36.7 in
Width
36.7 in
Height
46.7 in
Height
46.7 in
  • Air Inlet System
    • Turbocharged Air-to-Air Aftercooled
  • Control System
    • Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU) remote fan control
  • Cooling System
    • Vertical outlet thermostat housing, centrifugal water pump, guidance on cooling system design available to ensure machine reliability
  • Exhaust System
    • Clean Emissions Module (CEM) that includes Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC), and Cat Regeneration System, optional exhaust outlet
  • Flywheels and Flywheel Housing
    • SAE 0 and SAE 1 flywheel housing
  • Fuel System
    • MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming
  • Lube System
    • Open crankcase ventilation system, oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear driven), choice of sumps (front, rear, shallow)
  • Power Take Off
    • SAE A, SAE B, SAE C drives available, engine power can also be taken from the front of the engine on some applications
  • General
    • Paint: Cat yellow; vibration damper; lifting eyes
  • Engine-Mounted Transmission Oil Cooler
    • integration with engine cooling system allows ease of installation and a tighter overall engine package
  • Engine Brakes
    • braking capabilities for mobile applications