Land Production Generator Sets
C32 ACERT Tier 2 Oilfield Diesel Generator Set
-
Maximum Rating800 ekW (1000 kVA)
-
Minimum Rating910 ekW (1300 kVA)
-
EmissionsU.S. EPA Tier 2
-
AspirationTurbocharged-Aftercooled
Engine Specifications
- Maximum Rating
- 800 ekW (1000 kVA)
- Minimum Rating
- 910 ekW (1300 kVA)
- Emissions
- U.S. EPA Tier 2
- Aspiration
- Turbocharged-Aftercooled
- Aspiration
- Turbocharged-Aftercooled
- Manifold Type
- Dry
- Bore
- 5.7 in
- Bore
- 5.7 in
- Stroke
- 6.4 in
- Stroke
- 6.4 in
- Displacement
- 1959.0 in3
- Displacement
- 1959 in³
- Engine Control and Protection
- ADEM A4
- Generator set control
- EMCP 3.1
- Generator Set Control
- EMCP 3.1
- Generator
- SR4B
- Generator
- SR4B
- Fuel system
- MEUI
- Fuel System
- MEUI
- Frequency
- 50/60 Hz (1500/1800 rpm)
Capacity for Liquids
- Fuel
- Diesel
Dimensions
- Length
- 206.0 in
- Length
- 206 in
- Width
- 75.0 in
- Width
- 75 in
- Height
- 86.0 in
- Height
- 86 in
- Weight
- 20500.0 lb
- Weight
- 20500 lb
-
Air Inlet System
- Dual element air cleaner
- Service indicator
-
Cooling System
- Radiator package mounted (50° C)
- Coolant drain line with valve at edge of base
- Coolant level sensor
- Fan and belt guards
- Coolant level sight gauge
- Cat Extended Life Coolant
- Metal top and bottom tanks
-
Exhaust System
- Dry exhaust manifold
- Flange outlets
-
Fuel System
- Primary fuel filter with integral water separator
- Secondary fuel filters
- Fuel priming pump
- Flex fuel lines
- Fuel cooler
-
Generator
- SR4B brushless
- Self excited
- Class H insulation
- Form wound
- IP23 protection
- Cat DVR 3-phase sensing with selectable volts/Hz
- 3 sensing CTs and one droop CT
- Anti-condensation space heater
-
Generator Attachments
- Bus bar - NEMA and IEC mechanicallug holes
- Bottom cable entry; capable of top cable entry
-
Controls
- ADEM A4 ECU
- EMCP 3 Control Panel
-
Lube System
- High efficiency oil filter
- Oil drain valves
- Fumes disposal
- Gear-type lube oil pump
- Deep sump oil pan
-
Mounting System
- Steel base frame (skidable)
- Anti-vibration mounts (shipped loose)
- Designed welded base for increased durability (I-beam design)
-
Starting/Charging System
- 24-volt starting motor
- 45-amp charging alternator
- Battery rack
- Battery disconnect switch
- Oversized batteries
-
General
- Paint — Caterpillar yellow except rails and radiators (gloss black)
- Flywheel and flywheel housing — SAE No. 0
-
Air Inlet System
- Air inlet adapters
- Precleaners
-
Exhaust System
- Stainless steel exhaust flex fittings
- Elbows, flanges, expanders, and Y adapter
-
Generator
- Permanent magnet excitation
- Oversize and premium generators
-
Starting/Charging System
- Jacket water heater with shutoff valves
- Battery chargers (10 amp)
-
Controls
- EMCP 4.2 control panel
- EMCP 4.3 control panel
- Local or remote annunciator panel
- Generator temperature monitoring and protection
- Discreet I/O module
- Load share module (optional with direct rack)