Oil and Gas
C13 ACERT™ Tier 4 Final Engine
-
Maximum Rating520 BHP
-
Displacement762.8 in³
-
Minimum Rating385 BHP
-
AspirationTurbocharged-Aftercooled
General Specifications
- Maximum Rating
- 520 BHP
- Displacement
- 762.8 in³
- Minimum Rating
- 385 BHP
- Aspiration
- Turbocharged-Aftercooled
- Flywheel and Flywheel Housing
- SAE 1
- Flywheel Teeth
- 113
- Stroke
- 6.18 in
- Bore
- 5.12 in
Emissions
- Emissions
- EPA Tier 4 Final and EU Stage IV
Dimensions
- Length
- 50.1 in.
- Length
- 50.1 in
- Width
- 39.2 in.
- Width
- 39.2 in
- Height
- 44.6 in.
- Height
- 44.6 in
- Weight
- 2520.0 lb
- Weight
- 2520 lb
-
Control System
- Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, remote fan control, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU)
-
Cooling System
- Cooling package provides additional auxiliary heat load capacity capable of a minimum 10% of engine rated power. See the Web Ambient Tool (https://wbdat.cat.com/) for estimated ambient capability based on rating, fan drive ratio, fan, altitude and auxiliary heat load.
-
Exhaust System
- Mid-mount turbocharged system with front and rear exhaust configurations
-
Flywheels and Flywheel Housing
- SAE No. 1 flywheel housing; available SAE 1 power take-off housing with optional SAE A, SAE B, and SAE C power take-off drives; engine power can also be taken from the front of the engine with optional attachments
-
Fuel System
- MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming
-
Lube System
- Open crankcase ventilation system with fumes disposal (optional OCV filter system); oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear-driven); choice of sumps (front, rear, and center)
-
General
- Paint: Cat yellow
Mulchers: HM112 Standard Flow Mulcher 
Mulchers: HM115 Standard Flow Mulcher 
Material Handling: 4585mm (180in) Mat’l handing Arm, Fusion™ 
Material Handling: 3941 mm (155 in) Material Handling Arms – Loader 
Material Handling: Material Handling Arm For Compact Products 
Hammers: H215 S Hydraulic Hammer 
Hammers: H190 S Hydraulic Hammer 
Hammers: H180 S Hydraulic Hammer 
Hammers: H160 S Hydraulic Hammer 
Hammers: H120 S Hydraulic Hammer 
Hammers: H130 S Hydraulic Hammer 
Hammers: H140 S Hydraulic Hammer 
GC Hammers: H160 GC S Hammer 
Hammers: H110 S Hydraulic Hammer 
Hammers: H115 S Hammer 
GC Hammers: H180 GC S Hammer 
GC Hammers: H130 GC S Hammer 
GC Hammers: H115 GC S Hammer 
GC Hammers: H120 GC S Hammer