Oil and Gas
C13 ACERT™ Tier 4 Interim Engine
-
Maximum Rating520 BHP
-
Displacement762.8 in³
-
Minimum Rating385 BHP
-
Governor and ProtectionElectronic ADEM™ A4
General Specifications
- Maximum Rating
- 520 BHP
- Displacement
- 762.8 in³
- Minimum Rating
- 385 BHP
- Governor and Protection
- Electronic ADEM™ A4
- Aspiration
- Turbocharged-Aftercooled
- Flywheel and Flywheel Housing
- SAE No. 1
- Flywheel Teeth
- 113
- Rotation from Flywheel End
- Counterclockwise
- Stroke
- 6.2 in
- Bore
- 5.1 in
Emissions
- Emissions
- U.S. EPA Tier 4 Interim, EU Stage IIIB
Dimensions
- Length
- 47.4 in.
- Length
- 47.4 in
- Width
- 36.74 in.
- Width
- 36.74 in
- Height
- 46.7 in.
- Height
- 46.7 in
- Weight
- 2976.0 lb
- Weight
- 2976 lb
Capacity for Liquids
- Lube Oil System
- 35.9 gal
- Lube Oil System
- 35.9 gal (US)
- Cooling System
- 19.8 gal (US)
-
Air Inlet System
- Turbocharged Air-to-Air Aftercooled
-
Control System
- Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU) remote fan control
-
Cooling System
- Vertical outlet thermostat housing, centrifugal water pump, guidance on cooling system design available to ensure machine reliability.
-
Exhaust System
- Clean Emissions Module (CEM) that includes Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC), and Cat Regeneration System, optional exhaust outlet
-
Flywheels and Flywheel Housing
- SAE No. 1 flywheel housing
-
Fuel System
- MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming
-
Lube System
- Open crankcase ventilation system, oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear driven), choice of sumps (front, rear, deep front, deep rear, shallow)
-
Power Take Off
- SAE A, SAE B, SAE C drives available, engine power can also be taken from the front of the engine on some applications
-
General
- Paint: Cat yellow; vibration damper; lifting eyes
-
Engine-Mounted Transmission Oil Cooler
- integration withengine cooling system allows ease of installation and a tighteroverall engine package
-
Engine Brakes
- braking capabilities for mobile applications
Construction Forks: 2134mm (84 in) on 2743mm (108 in) Carriage Construction Forks 
Construction Forks: 1830 mm (72 in) on 2438mm (96 in) Carriage Construction Forks 
Block Forks: 1220 mm (48 in) Block Forks 
Flail Mowers: HMF110 Flail Mower 
Flail Mowers: HMF210 Flail Mower 
Block Handling: Block Handling Coupler for 980 H/K/M Wheel Loaders; 4-wedge 
Block Handling: Block Handling Coupler for 986H Wheel Loaders 
Block Handling: Block Handling Coupler for 988G/H Wheel Loaders 
Couplers - Loader: 963D Fusion Track Loader Coupler 
Couplers - Loader: 966-972 Fusion Wheel Loader Coupler 
Couplers - Loader: 966-972 Fusion Wheel Loader Coupler 
Couplers - Loader: 966-972 Fusion Wheel Loader Coupler 
Couplers - Excavator: Hydraulic Dual Lock™ Pin Grabber Coupler For 10 Ton Mini Excavators 
Couplers - Excavator: Hydraulic Dual Lock™ Pin Grabber Coupler For 8 Ton Mini Excavators 
Couplers - Loader: 950K/M-962K/M Fusion