Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Oil and Gas

C9.3 ACERT™ Tier 4i/Stage IIIB Engine

  • Maximum Rating
    350 BHP
  • Displacement
    567.5 in³
  • Minimum Rating
    300 BHP
  • Governor and Protection
    Electronic (ADEM™ A4)
General Specifications
Maximum Rating
350 BHP
Displacement
567.5 in³
Minimum Rating
300 BHP
Governor and Protection
Electronic (ADEM™ A4)
RPM
2200 r/min
Aspiration
Turbocharged-Aftercooled
Flywheel and Flywheel Housing
SAE 1 or SAE 2
Flywheel Teeth
113 (SAE 1)
Rotation from Flywheel End
Counterclockwise
Stroke
5.87 in
Bore
4.53 in
Emissions
Emissions
US EPA Tier 4 Interim, EU Stage IIIB
Dimensions
Length
45.3 in.
Length
45.3 in
Width
32.6 in.
Width
32.6 in
Height
44.21 in.
Height
44.21 in
Weight
1950.0 lb
Weight
1950 lb
Capacity for Liquids
Lube Oil System
31.7 gal
Lube Oil System
31.7 gal (US)
Cooling System
23.5 gal (US)
  • Air Inlet System
    • Turbocharged Air-to-Air Aftercooled
  • Control System
    • Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU) remote fan control
  • Cooling System
    • Vertical outlet thermostat housing, centrifugal water pump, guidance on cooling system design available to ensure machine reliability
  • Exhaust System
    • Clean Emissions Module (CEM) that includes Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC), and Cat Regeneration System, optional exhaust outlet
  • Flywheels and Flywheel Housing
    • SAE No. 1 and SAE No. 2 flywheel housing
  • Fuel System
    • High pressure common rail, primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming
  • Lube System
    • Open crankcase ventilation system, oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear driven), choice of sumps (front, rear, shallow)
  • Power Take Off
    • SAE A, SAE B, and SAE C drives available, engine power can also be taken from the front of the engine on some applications
  • General
    • Paint: Cat yellow, vibration damper, lifting eyes
  • Engine-Mounted Transmission Oil Cooler
    • integration with engine cooling system allows ease of installation and a tighter overall engine package
  • Engine Brakes
    • braking capabilities for mobile applications
Mulchers: HM112 Standard Flow Mulcher
Material Handling: 4137 mm (163 in) Material Handling Arm, Fusion
Material Handling: 3941 mm (155 in) Material Handling Arms – Loader
Material Handling: 4121mm (162in) Mat’l Handling Arm, Fusion™
Material Handling: 4585mm (180in) Mat’l handing Arm, Fusion™
Material Handling: Material Handling Arm For Compact Products
Hammers: H215 S Hydraulic Hammer
Hammers: H190 S Hydraulic Hammer
Hammers: H160 S Hydraulic Hammer
Hammers: H180 S Hydraulic Hammer
Hammers: H120 S Hydraulic Hammer
Hammers: H130 S Hydraulic Hammer
Hammers: H140 S Hydraulic Hammer
Hammers: H110 S Hydraulic Hammer
Hammers: H115 S Hammer
GC Hammers: H130 GC S Hammer
GC Hammers: H160 GC S Hammer
GC Hammers: H180 GC S Hammer
GC Hammers: H115 GC S Hammer
GC Hammers: H120 GC S Hammer
GC Hammers: H110 GC S Hammer