New 740 EJ Articulated Truck for Sale

740 EJ Articulated Truck

Engine Model

Cat® C18
Bore

5.7 in
Stroke

7.2 in
Displacement

1106 in³

Engine

Engine Model: Cat® C18
Bore: 5.7 in
Stroke: 7.2 in
Displacement: 1106 in³
Engine Model: Cat C18 ACERT
Gross Power: 511 HP
Net Power: 504 HP
Net Power: 496 HP
Engine Model: Cat C18
Emissions: The 740 EJ meets Tier 4 Final and Stage V emission standards.
No Engine De: 10000 ft
Note: The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
Note: The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note: Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions.
Note: DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio
Peak Engine Torque Gross: 1931 ft·lbf
Peak Engine Torque Net: 1887 ft·lbf
Peak Engine Torque Speed: 1200 r/min

Weights

Rated Payload: 42 ton (US)

Body Capacities

Heaped: 30.1 yd³
Struck: 23.5 yd³

Transmission

Forward: 3.8 mile/h
Forward: 5 mile/h
Forward: 7 mile/h
Forward: 8.8 mile/h
Forward: 11.6 mile/h
Forward: 14.2 mile/h
Forward: 19.6 mile/h
Reverse: 4 mile/h
Reverse: 9.1 mile/h
Forward: 23.5 mile/h
Forward: 34 mile/h

Sound Levels

Interior Cab: 72 dB(A)
Note: The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the
Note: Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Operating Weights

Center Axle: 17095 lb
Center Axle: 57214 lb
Center Axle: 40120 lb
Front Axle: 44849 lb
Front Axle: 48548 lb
Front Axle: 3534 lb
Rear Axle: 16515 lb
Rear Axle: 56637 lb
Rear Axle: 40120 lb
Total: 78623 lb
Total: 162399 lb
Total: 83776 lb

Body Plate

Type: High Strength Brinell HB450 Wear Resistant Steel
Base: 0.55 in
Chute: 0.55 in
Front: 0.28 in
Side: 0.43 in

Service Refill Capacities

Fuel Tank: 145.3 gal (US)
Cooling System: 23.7 gal (US)
Engine Crankcase: 13.7 gal (US)
DEF Tank: 5.3 gal (US)
Steering: 36.9 gal (US)
Transmission: 19.8 gal (US)
Brake Cooling Tank: 17.7 gal (US)
Axles: 15.8 gal (US)
Final Drive: 1.3 gal (US)

Steering

Lock to Lock: 4.8 seconds @ 60 rpm

Standards

Brakes: ISO 3450 – 2011
Cab: ISO 3449 Level II – 2005
Cab: ISO 3471 – 2008
Steering: ISO 5010 – 2007

Turning Circle

Note: Dimensions are for machines equipped with 29.5R25 tires.
Turning Dimensions: 233 in
Turning Dimensions: 356 in
Turning Dimensions: 173 in
Turning Dimensions: 339 in
Turning Dimensions: 45 deg

Blade Eject/Retract

Eject: 16 s
Eject: 17 s
Retract: 21 s
Retract: 21 s

Optimal Loader/Truck Pass Matching

Hydraulic Excavator: 5
Hydraulic Excavator: 4
Note: An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
Wheel Loader: 4–5
Wheel Loader: 4–5
Wheel Loader: 4

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
- Air conditioning with R134A refrigerant
- Windshield wiper and washer, two speed, intermittent (front)
- Windows opening side, tinted
- Adjustable air vents
- Two seat belts, operator's retractable
- Windshield wiper and washer, two speed (rear)
- Storage:
  – Cup holder
  – Flask receptacle
  – Under seat storage
  – Door pocket
  – Behind seat storage
  – Coat hook
- Mirrors: Extensive arrangement for improved visibility
- Tilt and telescopic steering wheel
- Sun visor
- Heater and defroster with variable speed fan
- Secondary steering – electro hydraulic
- Combined gear selection and eject control lever
- Machine operation monitoring system includes:
  – Action lamp
  – Engine oil pressure
  – Primary steering system
  – Left and right turn signal
  – High beam
  – Coolant temperature
  – Tachometer
  – Parking brake
  – Fuel level
  – Transmission oil temperature
  – Brake system
  – Transmission hold
  – Hoist control
  – Hydraulic system
  – Charging system
  – Retarder
  – Transmission fault
  – Traction control system
  – Check engine lamp
- Liquid Crystal Display (LCD):
  – Alert indicator
  – Selected gear and direction
  – Speed or auto shift
  – Review Operation and Maintenance Manual (OMM)
  – Primary steering failure
  – Seat belt warning
  – Secondary steering failure
  – DPF regeneration filter
  – Machine Security System (MSS)
  – Secondary steering energy source engaged
  – Hour meter
  – Retarder active
- Window blinds
- Glass windows: laminated and tinted-front toughened and tinted-sides and rear
- Touch screen display incorporating the rearview camera video feed
- Seats:
  – Fully adjustable, air suspension, heated/cooled
  – Padded trainer with lap belt
CAT TECHNOLOGIES
- Product Link: PL631 (satellite) or PL641 (cellular) dependent on location and licensing agreement
- Cat Detect with Stability Assist
ELECTRICAL AND LIGHTING
- Batteries (two) maintenance free
- Electrical system: 24 volt, 5A 24- to 12-volt converter
- Horn
- Lighting Systems:
  – Cab interior
  – Two head lamps
  – Two width marker
  – Two reversing
  – Work light
  – Two stop/tail lights
  – Front and rear direction indicators
- Main disconnect switch
- Remote starting receptacle (cables not included)
POWER TRAIN
- Auto shift nine-speed forward and two reverse transmission
- Cat C18 engine
- Differentials: standard with automatic clutched inter and cross-axle differential locks
- Dual circuit oil immersed, enclosed brakes – all wheels
- Retarder: engine compression brake
- Three axle, six-wheel drive
SAFETY
- Reverse alarm
- Rearview camera
- ROPS/FOPS cab
GUARDS
- Rear window
- Radiator
- Crankcase
- Axle
- Front dump body spill guard, integral part of fabricated body
OTHER STANDARD EQUIPMENT
- Mud flaps: wheel arch and body mounted with transportation tiebacks
- S·O·S sampling valves
- Tires, six 29.5R25, radial
- Vandalism protection: lockable caps for fuel tank and hydraulic oil tank

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
OPTIONAL EQUIPMENT
- Auto lube installation for automatic greasing of bearings
- Body liners
- Bluetooth radio stereo system
- Cat Production Measurement payload monitoring system
- Cold weather coolant –51° C (–60° F)
- Cold weather start attachment
- Engine block heater
- Ether start
- Exhaust heated body
- Fast fuel fill
- Fender extension
- Flashing LED beacon
- Four point seat belt
- Fuel additive – anti-waxing
- Heated rearview motorized mirrors
- Machine Security System (MSS)
- Product Link Elite: PLE631 (satellite), PLE641 (cellular)
- Roof mounted High Intensity Discharge (HID) work lights
- Sound suppression
- 875/65 R29 wide tires