Diesel Generator Sets
C9 Generator Set
-
Maximum Rating330 kVA
-
Minimum Rating230 kVA
-
EmissionsEU Stage IIIA
-
Voltage200 to 400 Volts
Generator Set Specifications
- Maximum Rating
- 330 kVA
- Minimum Rating
- 230 kVA
- Emissions
- EU Stage IIIA
- Voltage
- 200 to 400 Volts
- Frequency
- 50 Hz
- Speed
- 1500 rpm
- Duty Cycle
- Standby, Prime
Engine Specifications
- Engine Model
- C9 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
- Bore
- 4.41 in
- Stroke
- 5.87 in
- Displacement
- 537.01 in³
- Compression Ratio
- 16.1:1
- Aspiration
- Air to Air Aftercooled
- Fuel System
- Hydraulic electronic unit injection
- Governor Type
- Adem™A4
- Exhaust Flange Size
- 127 mm (5.0 in)
- Aspiration
- Air to Air Aftercooled
- Fuel System
- Hydraulic electronic unit injection
- Bore
- 4.41 in
- Displacement
- 537.01 in³
- Stroke
- 5.87 in
Generator Set Dimensions
- Length
- 157 in
- Width
- 47.5 in
- Height
- 73.5 in
-
Air Inlet System
- Air cleaner, light duty with disposable paper filter
-
Control Panels
- GCCP 1.3
-
Cooling System
- Fan drive, battery charging alternator drive
- Radiator and cooling fan with guard
- Caterpillar extended life coolant
- Coolant drain line with valve
-
Exhaust System
- Stainless steel exhaust flex, gaskets, rain cap & SAE exhaust flange for customer use - shipped loose
-
Fuel System
- Base, formed steel with single wall integral 8-hour fuel tank
- Standard open set fuel tank/base supplied
-
Generators and Generator Attachments
- 12 Leads
- Mandatory option circuit breaker, IEC, 3 pole mounted in power centre
- Voltage regulator (single phase sensing)
- Segregated low voltage (AC/DC) wiring panel
- IP23 Protection
- Power centre, IP22
-
Governing System
- Cat electronic governor (ADEM A4)
-
Lube System
- Oil drain valves
- Lubricating oil
- Oil cooler
-
Mounting System
- Includes lifting provisions and termination points for coolant and lube oil drain lines
- Captive linear vibration isolators between base and engine-generator
-
Starting / Charging System
- 24V battery with rack and cables
-
General
- Engine and alternator re-paint, Caterpillar yellow
-
Certifications
- European Certificate for Conformance
- Global Certification for CIS
-
Air inlet system
- Single element air cleaner
-
Circuit breakers
- 4 Pole (IEC-100% rated) Circuit breaker upgrades: 400, 630, 800 and 100 amps
-
Control Panels
- Control panel protective devices: Earth fault relay ; Earth leakage ground fault ; overload shutdown via breaker ; Low fuel level shutdown ; Low fuel level alarm ; Fuel level sensor
- Control panel Options: Volt free contacts ; Local alarm horn ; Oil temperature displays
-
Cooling System
- Radiator duct flange
- Low coolant temperature alarm
-
Enclosures
- Sound attenuated enclosure
- High ambient sound attenuated enclosure
-
Exhaust System
- 5 and 6 inch elbow kits
- 5 - 6 inch flange adaptor
- Mufflers - End in/end out; 10 dBA or 25 dBA attenuation
- 6 inch flange
-
Fuel System
- Integral dual wall fuel tank base
-
Generators and Attachments
- Permanent magnet excitation (PMG) generator
- Oversize, AREP, CIP generators
-
Mounting System
- Narrow skid base
-
Starting / Charging System
- Jacket water heater
- 5 Amp single Battery charger
- Battery disconnet switch
Mulchers: HM112 Standard Flow Mulcher 
Material Handling: 4137 mm (163 in) Material Handling Arm, Fusion 
Material Handling: 3941 mm (155 in) Material Handling Arms – Loader 
Material Handling: Material Handling Arm For Compact Products 
Hammers: H215 S Hydraulic Hammer 
Hammers: H190 S Hydraulic Hammer 
Hammers: H160 S Hydraulic Hammer 
Hammers: H180 S Hydraulic Hammer 
Hammers: H120 S Hydraulic Hammer 
Hammers: H130 S Hydraulic Hammer 
Hammers: H140 S Hydraulic Hammer 
Hammers: H110 S Hydraulic Hammer 
Hammers: H115 S Hammer 
GC Hammers: H130 GC S Hammer 
GC Hammers: H160 GC S Hammer 
GC Hammers: H180 GC S Hammer 
GC Hammers: H115 GC S Hammer 
GC Hammers: H120 GC S Hammer 
GC Hammers: H110 GC S Hammer